HTTP Headers

9 Method Definitions

The set of common methods for HTTP/1.1 is defined below. Although this set can be expanded, additional methods cannot be assumed to share the same semantics for separately extended clients and servers.

The Host request-header field (section 14.23) MUST accompany all HTTP/1.1 requests.

9.1 Safe and Idempotent Methods

9.1.1 Safe Methods

Implementors should be aware that the software represents the user in their interactions over the Internet, and should be careful to allow the user to be aware of any actions they might take which may have an unexpected significance to themselves or others.

In particular, the convention has been established that the GET and HEAD methods SHOULD NOT have the significance of taking an action other than retrieval. These methods ought to be considered "safe". This allows user agents to represent other methods, such as POST, PUT and DELETE, in a special way, so that the user is made aware of the fact that a possibly unsafe action is being requested.

Naturally, it is not possible to ensure that the server does not generate side-effects as a result of performing a GET request; in fact, some dynamic resources consider that a feature. The important distinction here is that the user did not request the side-effects, so therefore cannot be held accountable for them.

9.1.2 Idempotent Methods

Methods can also have the property of "idempotence" in that (aside from error or expiration issues) the side-effects of N > 0 identical requests is the same as for a single request. The methods GET, HEAD, PUT and DELETE share this property. Also, the methods OPTIONS and TRACE SHOULD NOT have side effects, and so are inherently idempotent.

However, it is possible that a sequence of several requests is non- idempotent, even if all of the methods executed in that sequence are idempotent. (A sequence is idempotent if a single execution of the entire sequence always yields a result that is not changed by a reexecution of all, or part, of that sequence.) For example, a sequence is non-idempotent if its result depends on a value that is later modified in the same sequence.

A sequence that never has side effects is idempotent, by definition (provided that no concurrent operations are being executed on the same set of resources).

9.2 OPTIONS

The OPTIONS method represents a request for information about the communication options available on the request/response chain identified by the Request-URI. This method allows the client to determine the options and/or requirements associated with a resource, or the capabilities of a server, without implying a resource action or initiating a resource retrieval.

Responses to this method are not cacheable.

If the OPTIONS request includes an entity-body (as indicated by the presence of Content-Length or Transfer-Encoding), then the media type MUST be indicated by a Content-Type field. Although this specification does not define any use for such a body, future extensions to HTTP might use the OPTIONS body to make more detailed queries on the server. A server that does not support such an extension MAY discard the request body.

If the Request-URI is an asterisk ("*"), the OPTIONS request is intended to apply to the server in general rather than to a specific resource. Since a server's communication options typically depend on the resource, the "*" request is only useful as a "ping" or "no-op" type of method; it does nothing beyond allowing the client to test the capabilities of the server. For example, this can be used to test a proxy for HTTP/1.1 compliance (or lack thereof).

If the Request-URI is not an asterisk, the OPTIONS request applies only to the options that are available when communicating with that resource.

A 200 response SHOULD include any header fields that indicate optional features implemented by the server and applicable to that resource (e.g., Allow), possibly including extensions not defined by this specification. The response body, if any, SHOULD also include information about the communication options. The format for such a

body is not defined by this specification, but might be defined by future extensions to HTTP. Content negotiation MAY be used to select the appropriate response format. If no response body is included, the response MUST include a Content-Length field with a field-value of "0".

The Max-Forwards request-header field MAY be used to target a specific proxy in the request chain. When a proxy receives an OPTIONS request on an absoluteURI for which request forwarding is permitted, the proxy MUST check for a Max-Forwards field. If the Max-Forwards field-value is zero ("0"), the proxy MUST NOT forward the message; instead, the proxy SHOULD respond with its own communication options. If the Max-Forwards field-value is an integer greater than zero, the proxy MUST decrement the field-value when it forwards the request. If no Max-Forwards field is present in the request, then the forwarded request MUST NOT include a Max-Forwards field.

9.3 GET

The GET method means retrieve whatever information (in the form of an entity) is identified by the Request-URI. If the Request-URI refers to a data-producing process, it is the produced data which shall be returned as the entity in the response and not the source text of the process, unless that text happens to be the output of the process.

The semantics of the GET method change to a "conditional GET" if the request message includes an If-Modified-Since, If-Unmodified-Since, If-Match, If-None-Match, or If-Range header field. A conditional GET method requests that the entity be transferred only under the circumstances described by the conditional header field(s). The conditional GET method is intended to reduce unnecessary network usage by allowing cached entities to be refreshed without requiring multiple requests or transferring data already held by the client.

The semantics of the GET method change to a "partial GET" if the request message includes a Range header field. A partial GET requests that only part of the entity be transferred, as described in section 14.35. The partial GET method is intended to reduce unnecessary network usage by allowing partially-retrieved entities to be completed without transferring data already held by the client.

The response to a GET request is cacheable if and only if it meets the requirements for HTTP caching described in section 13.

See section 15.1.3 for security considerations when used for forms.

9.4 HEAD

The HEAD method is identical to GET except that the server MUST NOT return a message-body in the response. The metainformation contained in the HTTP headers in response to a HEAD request SHOULD be identical to the information sent in response to a GET request. This method can be used for obtaining metainformation about the entity implied by the request without transferring the entity-body itself. This method is often used for testing hypertext links for validity, accessibility, and recent modification.

The response to a HEAD request MAY be cacheable in the sense that the information contained in the response MAY be used to update a previously cached entity from that resource. If the new field values indicate that the cached entity differs from the current entity (as would be indicated by a change in Content-Length, Content-MD5, ETag or Last-Modified), then the cache MUST treat the cache entry as stale.

9.5 POST

The POST method is used to request that the origin server accept the entity enclosed in the request as a new subordinate of the resource identified by the Request-URI in the Request-Line. POST is designed to allow a uniform method to cover the following functions:

      - Annotation of existing resources; 

      - Posting a message to a bulletin board, newsgroup, mailing list, or similar group of articles; 

      - Providing a block of data, such as the result of submitting a form, to a data-handling process; 

      - Extending a database through an append operation. 

The actual function performed by the POST method is determined by the server and is usually dependent on the Request-URI. The posted entity is subordinate to that URI in the same way that a file is subordinate to a directory containing it, a news article is subordinate to a newsgroup to which it is posted, or a record is subordinate to a database.

The action performed by the POST method might not result in a resource that can be identified by a URI. In this case, either 200 (OK) or 204 (No Content) is the appropriate response status, depending on whether or not the response includes an entity that describes the result.

If a resource has been created on the origin server, the response SHOULD be 201 (Created) and contain an entity which describes the status of the request and refers to the new resource, and a Location header (see section 14.30).

Responses to this method are not cacheable, unless the response includes appropriate Cache-Control or Expires header fields. However, the 303 (See Other) response can be used to direct the user agent to retrieve a cacheable resource.

POST requests MUST obey the message transmission requirements set out in section 8.2.

See section 15.1.3 for security considerations.

9.6 PUT

The PUT method requests that the enclosed entity be stored under the supplied Request-URI. If the Request-URI refers to an already existing resource, the enclosed entity SHOULD be considered as a modified version of the one residing on the origin server. If the Request-URI does not point to an existing resource, and that URI is capable of being defined as a new resource by the requesting user agent, the origin server can create the resource with that URI. If a new resource is created, the origin server MUST inform the user agent via the 201 (Created) response. If an existing resource is modified, either the 200 (OK) or 204 (No Content) response codes SHOULD be sent to indicate successful completion of the request. If the resource could not be created or modified with the Request-URI, an appropriate error response SHOULD be given that reflects the nature of the problem. The recipient of the entity MUST NOT ignore any Content-* (e.g. Content-Range) headers that it does not understand or implement and MUST return a 501 (Not Implemented) response in such cases.

If the request passes through a cache and the Request-URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable.

The fundamental difference between the POST and PUT requests is reflected in the different meaning of the Request-URI. The URI in a POST request identifies the resource that will handle the enclosed entity. That resource might be a data-accepting process, a gateway to some other protocol, or a separate entity that accepts annotations. In contrast, the URI in a PUT request identifies the entity enclosed with the request -- the user agent knows what URI is intended and the server MUST NOT attempt to apply the request to some other resource. If the server desires that the request be applied to a different URI,

it MUST send a 301 (Moved Permanently) response; the user agent MAY then make its own decision regarding whether or not to redirect the request.

A single resource MAY be identified by many different URIs. For example, an article might have a URI for identifying "the current version" which is separate from the URI identifying each particular version. In this case, a PUT request on a general URI might result in several other URIs being defined by the origin server.

HTTP/1.1 does not define how a PUT method affects the state of an origin server.

PUT requests MUST obey the message transmission requirements set out in section 8.2.

Unless otherwise specified for a particular entity-header, the entity-headers in the PUT request SHOULD be applied to the resource created or modified by the PUT.

9.7 DELETE

The DELETE method requests that the origin server delete the resource identified by the Request-URI. This method MAY be overridden by human intervention (or other means) on the origin server. The client cannot be guaranteed that the operation has been carried out, even if the status code returned from the origin server indicates that the action has been completed successfully. However, the server SHOULD NOT indicate success unless, at the time the response is given, it intends to delete the resource or move it to an inaccessible location.

A successful response SHOULD be 200 (OK) if the response includes an entity describing the status, 202 (Accepted) if the action has not yet been enacted, or 204 (No Content) if the action has been enacted but the response does not include an entity.

If the request passes through a cache and the Request-URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable.

9.8 TRACE

The TRACE method is used to invoke a remote, application-layer loop- back of the request message. The final recipient of the request SHOULD reflect the message received back to the client as the entity-body of a 200 (OK) response. The final recipient is either the

origin server or the first proxy or gateway to receive a Max-Forwards value of zero (0) in the request (see section 14.31). A TRACE request MUST NOT include an entity.

TRACE allows the client to see what is being received at the other end of the request chain and use that data for testing or diagnostic information. The value of the Via header field (section 14.45) is of particular interest, since it acts as a trace of the request chain. Use of the Max-Forwards header field allows the client to limit the length of the request chain, which is useful for testing a chain of proxies forwarding messages in an infinite loop.

If the request is valid, the response SHOULD contain the entire request message in the entity-body, with a Content-Type of "message/http". Responses to this method MUST NOT be cached.

9.9 CONNECT

This specification reserves the method name CONNECT for use with a proxy that can dynamically switch to being a tunnel (e.g. SSL tunneling [44]).

List of HTTP Response Status Codes

1xx Info / Informational

HTTP_INFO - Request received, continuing process.

Indicates a provisional response, consisting only of the Status-Line and optional headers, and is terminated by an empty line.

• 100 Continue - HTTP_CONTINUE
• 101 Switching Protocols - HTTP_SWITCHING_PROTOCOLS
• 102 Processing - HTTP_PROCESSING

2xx Success / OK

HTTP_SUCCESS - The action was successfully received, understood, and accepted.

Indicates that the client's request was successfully received, understood, and accepted.

• 200 OK - HTTP_OK
• 201 Created - HTTP_CREATED
• 202 Accepted - HTTP_ACCEPTED
• 203 Non-Authoritative Information - HTTP_NON_AUTHORITATIVE
• 204 No Content - HTTP_NO_CONTENT
• 205 Reset Content - HTTP_RESET_CONTENT
• 206 Partial Content - HTTP_PARTIAL_CONTENT
• 207 Multi-Status - HTTP_MULTI_STATUS

3xx Redirect

HTTP_REDIRECT - The client must take additional action to complete the request.

Indicates that further action needs to be taken by the user-agent in order to fulfill the request. The action required may be carried out by the user agent without interaction with the user if and only if the method used in the second request is GET or HEAD. A user agent should not automatically redirect a request more than 5 times, since such redirections usually indicate an infinite loop.

• 300 Multiple Choices - HTTP_MULTIPLE_CHOICES
• 301 Moved Permanently - HTTP_MOVED_PERMANENTLY
• 302 Found - HTTP_MOVED_TEMPORARILY
• 303 See Other - HTTP_SEE_OTHER
• 304 Not Modified - HTTP_NOT_MODIFIED
• 305 Use Proxy - HTTP_USE_PROXY
• 306 unused - UNUSED
• 307 Temporary Redirect - HTTP_TEMPORARY_REDIRECT

4xx Client Error

HTTP_CLIENT_ERROR - The request contains bad syntax or cannot be fulfilled.

Indicates case where client seems to have erred. Except when responding to a HEAD request, the server should include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition.

• 400 Bad Request - HTTP_BAD_REQUEST
• 401 Authorization Required - HTTP_UNAUTHORIZED
• 402 Payment Required - HTTP_PAYMENT_REQUIRED
• 403 Forbidden - HTTP_FORBIDDEN
• 404 Not Found - HTTP_NOT_FOUND
• 405 Method Not Allowed - HTTP_METHOD_NOT_ALLOWED
• 406 Not Acceptable - HTTP_NOT_ACCEPTABLE
• 407 Proxy Authentication Required - HTTP_PROXY_AUTHENTICATION_REQUIRED
• 408 Request Time-out - HTTP_REQUEST_TIME_OUT
• 409 Conflict - HTTP_CONFLICT
• 410 Gone - HTTP_GONE
• 411 Length Required - HTTP_LENGTH_REQUIRED
• 412 Precondition Failed - HTTP_PRECONDITION_FAILED
• 413 Request Entity Too Large - HTTP_REQUEST_ENTITY_TOO_LARGE
• 414 Request-URI Too Large - HTTP_REQUEST_URI_TOO_LARGE
• 415 Unsupported Media Type - HTTP_UNSUPPORTED_MEDIA_TYPE
• 416 Requested Range Not Satisfiable - HTTP_RANGE_NOT_SATISFIABLE
• 417 Expectation Failed - HTTP_EXPECTATION_FAILED
• 418 unused - UNUSED
• 419 unused - UNUSED
• 420 unused - UNUSED
• 421 unused - UNUSED
• 422 Unprocessable Entity - HTTP_UNPROCESSABLE_ENTITY
• 423 Locked - HTTP_LOCKED
• 424 Failed Dependency - HTTP_FAILED_DEPENDENCY
• 425 No code - HTTP_NO_CODE
• 426 Upgrade Required - HTTP_UPGRADE_REQUIRED

5xx Server Error

HTTP_SERVER_ERROR - The server failed to fulfill an apparently valid request.

Indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server should include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents should display any included entity to the user. These response codes are applicable to any request method.

• 500 Internal Server Error - HTTP_INTERNAL_SERVER_ERROR
• 501 Method Not Implemented - HTTP_NOT_IMPLEMENTED
• 502 Bad Gateway - HTTP_BAD_GATEWAY
• 503 Service Temporarily Unavailable - HTTP_SERVICE_UNAVAILABLE
• 504 Gateway Time-out - HTTP_GATEWAY_TIME_OUT
• 505 HTTP Version Not Supported - HTTP_VERSION_NOT_SUPPORTED
• 506 Variant Also Negotiates - HTTP_VARIANT_ALSO_VARIES
• 507 Insufficient Storage - HTTP_INSUFFICIENT_STORAGE
• 508 unused - UNUSED
• 509 unused - UNUSED
• 510 Not Extended - HTTP_NOT_EXTENDED

Helpful HTTP Links

1. HTTP specification, Section 10
2. TLS Upgrade within HTTP specification, Section 4
3. HTTP Status Code Registry
4. WebDAV specification, Section 11
5. IANA registry
6. Adobe Flash status code definitions (ie 408)
7. Microsoft Internet Information Server Status Codes and Sub-Codes
8. httplint
9. HTTP Headers, brief intro.
10. Common User-Agent Issues

DRP

"The HTTP Distribution and Replication Protocol"

DupSup

"Duplicate Suppression in HTTP"

EARL Schema

"Evaluation and Report Language (EARL) 1.0 Schema"

EDD

"An exploration of dynamic documents"

EdgeArch

"Edge Architecture Specification"

HttpClient

Jakarta Commons HttpClient

HTML4

"HTML 4.01 Specification"

JEPI

"White Paper: Joint Electronic Payment Initiative"

ObjectHeaders

"Object Header lines in HTTP"

OPS-OverHTTP

"Implementation of OPS Over HTTP"

OPTIONS messages

"Specification of HTTP/1.1 OPTIONS messages"

P3P

"The Platform for Privacy Preferences 1.0 (P3P1.0) Specification"

PEP

"PEP - an Extension Mechanism for HTTP"

PICSLabels

"PICS Label Distribution Label Syntax and Communication Protocols, Version 1.1"

Proxy Notification

"Notification for Proxy Caches"

RDF

"Resource Description Framework (RDF): Concepts and Abstract Syntax"

RDF-PRIMER

RDF Primer

RFC2068

"Hypertext Transfer Protocol -- HTTP/1.1"

RFC2109

"HTTP State Management Mechanism"

RFC2183

"Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field"

RFC2227

"Simple Hit-Metering and Usage-Limiting for HTTP"

RFC2295

"Transparent Content Negotiation in HTTP"

RFC2310

"The Safe Response Header Field"

RFC2324

"Hyper Text Coffee Pot Control Protocol (HTCPCP/1.0)"

RFC2397

"The 'data' URL scheme"

RFC2518

"HTTP Extensions for Distributed Authoring -- WEBDAV"

RFC2616

"Hypertext Transfer Protocol -- HTTP/1.1"

RFC2617

"HTTP Authentication: Basic and Digest Access Authentication"

RFC2660

"The Secure HyperText Transfer Protocol"

RFC2774

"An HTTP Extension Framework"

RFC2965

"HTTP State Management Mechanism"

RFC3229

"Delta encoding in HTTP"

RFC3230

"Instance Digests in HTTP"

RFC3253

"Versioning Extensions to WebDAV (Web Distributed Authoring and Versioning)"

RFC3648

"Web Distributed Authoring and Versioning (WebDAV) Ordered Collections Protocol"

RFC3986

"Uniform Resource Identifier (URI): Generic Syntax"

RFC4229

"HTTP Header Field Registrations"

SOAP1.1

"Simple Object Access Protocol (SOAP) 1.1"

UA Attributes

"User-Agent Display Attributes Headers"

WIRE

"WIRE - W3 Identifier Resolution Extensions"

Raw HTTP Header Debugger originally appeared on AskApache.com

I was going through some backups from years ago, and ran:

locate .htaccess | xargs -I'{}' cat '{}' >> master-htaccesser.txt

My site is named after reading source code because that is what helps me the most when I'm trying to learn something unusually difficult. Just like functions and aliases, it is very helpful to have cheatsheets for common commands.. not much is better than real-world examples. Unfortunately because this was compiled from hundreds of htaccess files on multiple hosts and platforms, and due to the concatenation, it's not organized.

Normally I would not publish something like this, who knows how much unreleased tricks I forgot about.. but in order to say thanks to all those working for open-source, the FSF, and to all those who don't steal content, and to all the incredible authors who shared with me (I twitter most of what I find, and follow my favs), here ya go..

ATTN: Please let me know if this is total junk or not, this is around 1/500th of my master-htaccesser.txt file.. and I'd be happy to post more if it helps..

Checking for Cookie

Used this to stop mp3-scrapers.. checks for a cookie ending in MP3P=02357

Options -Indexes
RewriteEngine On
RewriteCond %{HTTP_COOKIE} !^.*MP3P=([0-9]+).* [NC]
RewriteRule .* - [F,L]

Setting Environment Var if Proxied

RewriteEngine On
RewriteRule "\.(gif|png|jpg)$" "-" [ENV=proxied_image:1]
RewriteCond "%{ENV:proxied_image}" "!1"
RewriteRule "^" "-" [ENV=proxied_other:1]

nokeepalive for ErrorDocs and Abusers

Options SymLinksIfOwnerMatch IncludesNOEXEC
AddOutputFilter Includes html
SetEnv nokeepalive
Order Allow,Deny
Allow from all
# 1 YEAR
<filesMatch "\.(js|css)$">
Header unset Pragma
FileETag None
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
Header unset Last-Modified
Header unset Last-Modified
Header unset ETag
 
SetOutputFilter DEFLATE
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
</filesMatch>
SecFilterEngine Off
 
# 1 YEAR
<filesMatch "\.(js|css)$">
Header unset Pragma
FileETag None
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
Header unset Last-Modified
Header unset Last-Modified
Header unset ETag
 
SetOutputFilter DEFLATE
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
</filesMatch>

Unreleased Tests for AskApache Password Protection

# +ASKAPACHE PASSPRO 4.6.6
#######################################################
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
# +APRO SIDS
# +SID 21030002
Order Deny,Allow
Deny from All
Satisfy Any
AuthType Digest
AuthName "Protected By AskApache"
AuthDigestDomain / http://www.askapache.com/
AuthDigestFile /home/.greer/askapache/sites/askapache.com/.htpasswda3
Require valid-user
<filesMatch "\.(ico|pdf|flv|jpg|jpeg|mp3|mpg|mp4|mov|wav|wmv|png|gif|swf|css|js)$">
Allow from All
</filesMatch>
<filesMatch "(async-upload|admin-ajax)\.php$">
<ifModule mod_security.c>
SecFilterEngine Off
</ifModule>
Allow from All
</filesMatch>
# -SID 21030002
# -APRO SIDS
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
#######################################################
# -ASKAPACHE PASSPRO 4.6.6
 
# +ASKAPACHE PASSPRO 4.6.6
#######################################################
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
# +APRO SIDS
# +SID Test
ErrorDocument 401 /wp-content/askapache/test.gif
ErrorDocument 403 /wp-content/askapache/test.gif
ErrorDocument 404 /wp-content/askapache/test.gif
ErrorDocument 500 /wp-content/askapache/test.gif
ServerSignature On
<ifModule mod_alias.c>
RedirectMatch 305 ^.*modaliastest$ http://www.askapache.com
</ifModule>
<ifModule mod_rewrite.c>
RewriteEngine On
RewriteBase /
RewriteCond %{QUERY_STRING} modrewritetest [NC]
RewriteRule .* http://www.askapache.com [R=307,L]
</ifModule>
<files modsec_check.gif>
<ifModule mod_security.c>
SetEnv MODSEC_ENABLE On
SecFilterEngine On
SecFilterDefaultAction "nolog,noauditlog,pass"
SecAuditEngine Off
SecFilterInheritance Off
SecFilter modsecuritytest "deny,nolog,noauditlog,status:503"
Deny from All
</ifModule>
</files>
<files basic_auth_test.gif>
AuthType Basic
AuthName "askapache test"
AuthUserFile /home/.greer/askapache/sites/askapache.com/htdocs/wp-content/askapache/.htpasswd-basic
Require valid-user
</files>
<files digest_check.gif>
AuthType Digest
AuthName "askapache test"
AuthDigestDomain /wp-content/askapache/ http://www.askapache.com/wp-content/askapache/
AuthUserFile /home/.greer/askapache/sites/askapache.com/htdocs/wp-content/askapache/.htpasswd-digest
Require none
</files>
<files authuserfile_test.gif>
AuthType Digest
AuthName "askapache test"
AuthDigestDomain /wp-content/askapache/ http://www.askapache.com/wp-content/askapache/
AuthUserFile /home/.greer/askapache/sites/askapache.com/htdocs/wp-content/askapache/.htpasswd-digest
Require valid-user
</files>
<files authdigestfile_test.gif>
AuthType Digest
AuthName "askapache test"
AuthDigestDomain /wp-content/askapache/ http://www.askapache.com/wp-content/askapache/
AuthDigestFile /home/.greer/askapache/sites/askapache.com/htdocs/wp-content/askapache/.htpasswd-digest
Require valid-user
</files>
# -SID Test
# -APRO SIDS
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
#######################################################
# -ASKAPACHE PASSPRO 4.6.6

Warming up to the really advanced tests

Options +ExecCGI
Order Deny,Allow
Deny from All
Allow from 208.113.134.190 64.111.114.111 208.113.134.203 208.113.152.201 env=REDIRECT_STATUS
Satisfy Any
Options +FollowSymLinks
AddHandler application/x-httpd-php .php
 
RewriteEngine On
RewriteBase /
RewriteCond %{QUERY_STRING} !^tyy+$ [NC]
RewriteCond %{REMOTE_USER} ^(.+)$
RewriteRule ^(.*)$ $1/-%1 [R=302,L]
Options +ExecCGI +FollowSymLinks
DirectoryIndex index.php
ErrorDocument 404 /cgi-bin/pro/index.php
 
AuthType Digest
AuthName "AskApache Pro"
AuthDigestFile /home/askapache/sites/askapache.com/.htpasswd-pro
AuthDigestDomain /cgi-bin/pro/ http://www.askapache.com/cgi-bin/pro/ https://www.askapache.com/cgi-bin/pro/
Require user askapacheDirectoryIndex p.php
ErrorDocument 403 /cgi-bin/p/p.php
ErrorDocument 401 /cgi-bin/p/p.php
ErrorDocument 500 /cgi-bin/p/p.php
ErrorDocument 503 /cgi-bin/p/p.php
 
RewriteEngine On
RewriteBase /
RewriteRule .* - [E=INFO_API_VERSION:%{API_VERSION}]
RewriteRule .* - [E=INFO_AUTH_TYPE:%{AUTH_TYPE}]
RewriteRule .* - [E=INFO_CONTENT_LENGTH:%{CONTENT_LENGTH}]
RewriteRule .* - [E=INFO_CONTENT_TYPE:%{CONTENT_TYPE}]
RewriteRule .* - [E=INFO_DOCUMENT_ROOT:%{DOCUMENT_ROOT}]
RewriteRule .* - [E=INFO_GATEWAY_INTERFACE:%{GATEWAY_INTERFACE}]
RewriteRule .* - [E=INFO_HTTPS:%{HTTPS}]
RewriteRule .* - [E=INFO_HTTP_ACCEPT:%{HTTP:Accept}]
RewriteRule .* - [E=INFO_HTTP_ACCEPT_LANGUAGE:%{HTTP:Accept-Language}]
RewriteRule .* - [E=INFO_HTTP_ACCEPT_ENCODING:%{HTTP:Accept-Encoding}]
RewriteRule .* - [E=INFO_HTTP_ACCEPT_CHARSET:%{HTTP:Accept-Charset}]
RewriteRule .* - [E=INFO_HTTP_CACHE_CONTROL:%{HTTP:Cache-Control}]
RewriteRule .* - [E=INFO_HTTP_CONNECTION:%{HTTP:Connection}]
RewriteRule .* - [E=INFO_HTTP_COOKIE:%{HTTP_COOKIE}]
RewriteRule .* - [E=INFO_HTTP_FORWARDED:%{HTTP_FORWARDED}]
RewriteRule .* - [E=INFO_HTTP_HOST:%{HTTP_HOST}]
RewriteRule .* - [E=INFO_HTTP_KEEP_ALIVE:%{HTTP_KEEP_ALIVE}]
RewriteRule .* - [E=INFO_HTTP_PROXY_CONNECTION:%{HTTP_PROXY_CONNECTION}]
RewriteRule .* - [E=INFO_HTTP_REFERER:%{HTTP:Referer}]
RewriteRule .* - [E=INFO_HTTP_USER_AGENT:%{HTTP_USER_AGENT}]
RewriteRule .* - [E=INFO_IS_SUBREQ:%{IS_SUBREQ}]
RewriteRule .* - [E=INFO_ORIG_PATH_INFO:%{ORIG_PATH_INFO}]
RewriteRule .* - [E=INFO_ORIG_PATH_TRANSLATED:%{ORIG_PATH_TRANSLATED}]
RewriteRule .* - [E=INFO_ORIG_SCRIPT_FILENAME:%{ORIG_SCRIPT_FILENAME}]
RewriteRule .* - [E=INFO_ORIG_SCRIPT_NAME:%{ORIG_SCRIPT_NAME}]
RewriteRule .* - [E=INFO_PATH:%{PATH}]
RewriteRule .* - [E=INFO_PATH_INFO:%{PATH_INFO}]
RewriteRule .* - [E=INFO_QUERY_STRING:%{QUERY_STRING}]
RewriteRule .* - [E=INFO_REDIRECT_QUERY_STRING:%{REDIRECT_QUERY_STRING}]
RewriteRule .* - [E=INFO_REDIRECT_REMOTE_USER:%{REDIRECT_REMOTE_USER}]
RewriteRule .* - [E=INFO_REDIRECT_STATUS:%{REDIRECT_STATUS}]
RewriteRule .* - [E=INFO_REDIRECT_URL:%{REDIRECT_URL}]
RewriteRule .* - [E=INFO_REMOTE_ADDR:%{REMOTE_ADDR}]
RewriteRule .* - [E=INFO_REMOTE_HOST:%{REMOTE_HOST}]
RewriteRule .* - [E=INFO_REMOTE_IDENT:%{REMOTE_IDENT}]
RewriteRule .* - [E=INFO_REMOTE_PORT:%{REMOTE_PORT}]
RewriteRule .* - [E=INFO_REMOTE_USER:%{REMOTE_USER}]
RewriteRule .* - [E=INFO_REQUEST_FILENAME:%{REQUEST_FILENAME}]
RewriteRule .* - [E=INFO_REQUEST_METHOD:%{REQUEST_METHOD}]
RewriteRule .* - [E=INFO_REQUEST_URI:%{REQUEST_URI}]
RewriteRule .* - [E=INFO_REDIRECT_REQUEST_URI:%{REDIRECT_REQUEST_URI}]
RewriteRule .* - [E=INFO_SCRIPT_FILENAME:%{SCRIPT_FILENAME}]
RewriteRule .* - [E=INFO_SCRIPT_GROUP:%{SCRIPT_GROUP}]
RewriteRule .* - [E=INFO_SCRIPT_NAME:%{SCRIPT_NAME}]
RewriteRule .* - [E=INFO_SCRIPT_URI:%{SCRIPT_URI}]
RewriteRule .* - [E=INFO_SCRIPT_URL:%{SCRIPT_URL}]
RewriteRule .* - [E=INFO_SCRIPT_USER:%{SCRIPT_USER}]
RewriteRule .* - [E=INFO_SERVER_ADDR:%{SERVER_ADDR}]
RewriteRule .* - [E=INFO_SERVER_ADMIN:%{SERVER_ADMIN}]
RewriteRule .* - [E=INFO_SERVER_NAME:%{SERVER_NAME}]
RewriteRule .* - [E=INFO_SERVER_PORT:%{SERVER_PORT}]
RewriteRule .* - [E=INFO_SERVER_PROTOCOL:%{SERVER_PROTOCOL}]
RewriteRule .* - [E=INFO_SERVER_SIGNATURE:%{SERVER_SIGNATURE}]
RewriteRule .* - [E=INFO_SERVER_SOFTWARE:%{SERVER_SOFTWARE}]
RewriteRule .* - [E=INFO_THE_REQUEST:%{THE_REQUEST}]
RewriteRule .* - [E=INFO_TIME:%{TIME}]
RewriteRule .* - [E=INFO_TIME_DAY:%{TIME_DAY}]
RewriteRule .* - [E=INFO_TIME_HOUR:%{TIME_HOUR}]
RewriteRule .* - [E=INFO_TIME_MIN:%{TIME_MIN}]
RewriteRule .* - [E=INFO_TIME_MON:%{TIME_MON}]
RewriteRule .* - [E=INFO_TIME_SEC:%{TIME_SEC}]
RewriteRule .* - [E=INFO_TIME_WDAY:%{TIME_WDAY}]
RewriteRule .* - [E=INFO_TIME_YEAR:%{TIME_YEAR}]
RewriteRule .* - [E=INFO_TZ:%{TZ}]
RewriteRule .* - [E=INFO_UNIQUE_ID:%{UNIQUE_ID}]
 
RequestHeader set INFO_API_VERSION "%{INFO_API_VERSION}e"
RequestHeader set INFO_AUTH_TYPE "%{INFO_AUTH_TYPE}e"
RequestHeader set INFO_CONTENT_LENGTH "%{INFO_CONTENT_LENGTH}e"
RequestHeader set INFO_CONTENT_TYPE "%{INFO_CONTENT_TYPE}e"
RequestHeader set INFO_DOCUMENT_ROOT "%{INFO_DOCUMENT_ROOT}e"
RequestHeader set INFO_GATEWAY_INTERFACE "%{INFO_GATEWAY_INTERFACE}e"
RequestHeader set INFO_HTTPS "%{INFO_HTTPS}e"
RequestHeader set INFO_HTTP_ACCEPT "%{INFO_HTTP_ACCEPT}e"
RequestHeader set INFO_HTTP_ACCEPT_LANGUAGE "%{INFO_HTTP_ACCEPT_LANGUAGE}e"
RequestHeader set INFO_HTTP_ACCEPT_ENCODING "%{INFO_HTTP_ACCEPT_ENCODING}e"
RequestHeader set INFO_HTTP_ACCEPT_CHARSET "%{INFO_HTTP_ACCEPT_CHARSET}e"
RequestHeader set INFO_HTTP_CACHE_CONTROL "%{INFO_HTTP_CACHE_CONTROL}e"
RequestHeader set INFO_HTTP_CONNECTION "%{INFO_HTTP_CONNECTION}e"
RequestHeader set INFO_HTTP_COOKIE "%{INFO_HTTP_COOKIE}e"
RequestHeader set INFO_HTTP_FORWARDED "%{INFO_HTTP_FORWARDED}e"
RequestHeader set INFO_HTTP_HOST "%{INFO_HTTP_HOST}e"
RequestHeader set INFO_HTTP_KEEP_ALIVE "%{INFO_HTTP_KEEP_ALIVE}e"
RequestHeader set INFO_HTTP_PROXY_CONNECTION "%{INFO_HTTP_PROXY_CONNECTION}e"
RequestHeader set INFO_HTTP_REFERER "%{INFO_HTTP_REFERER}e"
RequestHeader set INFO_HTTP_USER_AGENT "%{INFO_HTTP_USER_AGENT}e"
RequestHeader set INFO_IS_SUBREQ "%{INFO_IS_SUBREQ}e"
RequestHeader set INFO_ORIG_PATH_INFO "%{INFO_ORIG_PATH_INFO}e"
RequestHeader set INFO_ORIG_PATH_TRANSLATED "%{INFO_ORIG_PATH_TRANSLATED}e"
RequestHeader set INFO_ORIG_SCRIPT_FILENAME "%{INFO_ORIG_SCRIPT_FILENAME}e"
RequestHeader set INFO_ORIG_SCRIPT_NAME "%{INFO_ORIG_SCRIPT_NAME}e"
RequestHeader set INFO_PATH "%{INFO_PATH}e"
RequestHeader set INFO_PATH_INFO "%{INFO_PATH_INFO}e"
RequestHeader set INFO_QUERY_STRING "%{INFO_QUERY_STRING}e"
RequestHeader set INFO_REDIRECT_QUERY_STRING "%{INFO_REDIRECT_QUERY_STRING}e"
RequestHeader set INFO_REDIRECT_REMOTE_USER "%{INFO_REDIRECT_REMOTE_USER}e"
RequestHeader set INFO_REDIRECT_STATUS "%{INFO_REDIRECT_STATUS}e"
RequestHeader set INFO_REDIRECT_URL "%{INFO_REDIRECT_URL}e"
RequestHeader set INFO_REMOTE_ADDR "%{INFO_REMOTE_ADDR}e"
RequestHeader set INFO_REMOTE_HOST "%{INFO_REMOTE_HOST}e"
RequestHeader set INFO_REMOTE_IDENT "%{INFO_REMOTE_IDENT}e"
RequestHeader set INFO_REMOTE_PORT "%{INFO_REMOTE_PORT}e"
RequestHeader set INFO_REMOTE_USER "%{INFO_REMOTE_USER}e"
RequestHeader set INFO_REQUEST_FILENAME "%{INFO_REQUEST_FILENAME}e"
RequestHeader set INFO_REQUEST_METHOD "%{INFO_REQUEST_METHOD}e"
RequestHeader set INFO_REQUEST_URI "%{INFO_REQUEST_URI}e"
RequestHeader set INFO_REQUEST_URI "%{INFO_REQUEST_URI}e"
RequestHeader set INFO_SCRIPT_FILENAME "%{INFO_SCRIPT_FILENAME}e"
RequestHeader set INFO_SCRIPT_GROUP "%{INFO_SCRIPT_GROUP}e"
RequestHeader set INFO_SCRIPT_NAME "%{INFO_SCRIPT_NAME}e"
RequestHeader set INFO_SCRIPT_URI "%{INFO_SCRIPT_URI}e"
RequestHeader set INFO_SCRIPT_URL "%{INFO_SCRIPT_URL}e"
RequestHeader set INFO_SCRIPT_USER "%{INFO_SCRIPT_USER}e"
RequestHeader set INFO_SERVER_ADDR "%{INFO_SERVER_ADDR}e"
RequestHeader set INFO_SERVER_ADMIN "%{INFO_SERVER_ADMIN}e"
RequestHeader set INFO_SERVER_NAME "%{INFO_SERVER_NAME}e"
RequestHeader set INFO_SERVER_PORT "%{INFO_SERVER_PORT}e"
RequestHeader set INFO_SERVER_PROTOCOL "%{INFO_SERVER_PROTOCOL}e"
RequestHeader set INFO_SERVER_SIGNATURE "%{INFO_SERVER_SIGNATURE}e"
RequestHeader set INFO_SERVER_SOFTWARE "%{INFO_SERVER_SOFTWARE}e"
RequestHeader set INFO_THE_REQUEST "%{INFO_THE_REQUEST}e"
RequestHeader set INFO_TIME "%{INFO_TIME}e"
RequestHeader set INFO_TIME_DAY "%{INFO_TIME_DAY}e"
RequestHeader set INFO_TIME_HOUR "%{INFO_TIME_HOUR}e"
RequestHeader set INFO_TIME_MIN "%{INFO_TIME_MIN}e"
RequestHeader set INFO_TIME_MON "%{INFO_TIME_MON}e"
RequestHeader set INFO_TIME_SEC "%{INFO_TIME_SEC}e"
RequestHeader set INFO_TIME_WDAY "%{INFO_TIME_WDAY}e"
RequestHeader set INFO_TIME_YEAR "%{INFO_TIME_YEAR}e"
RequestHeader set INFO_TZ "%{INFO_TZ}e"
RequestHeader set INFO_UNIQUE_ID "%{INFO_UNIQUE_ID}e"
 
Options +FollowSymLinks +ExecCGI
DirectoryIndex /cgi-bin/rewrite-test/index.php
 
Header echo ^.*
 
AuthType Digest
AuthName "AskApache Pro"
AuthDigestFile /home/askapache/sites/askapache.com/.htpasswd-pro
AuthDigestDomain / http://www.askapache.com/cgi-bin/rewrite-test/ https://www.askapache.com/cgi-bin/rewrite-test/
Require user askapache
 
SetEnv MODSEC_ENABLE=On
 
SetEnvIfNoCase ^WWW-Auth "(.+)" HTTP_WWW_AUTHORIZATION=$1
SetEnvIfNoCase ^If "(.+)" HTTP_IF_MODIFIED_SINCE=$1
SetEnvIfNoCase ^If-None-Match$ "(.+)" HTTP_IF_NONE_MATCH=$1
SetEnvIfNoCase ^Cache-Control$ "(.+)" HTTP_CACHE_CONTROL=$1
SetEnvIfNoCase ^Connection$ "(.+)" HTTP_CONNECTION=$1
SetEnvIfNoCase ^Keep-Alive$ "(.+)" HTTP_KEEP_ALIVE=$1
SetEnvIfNoCase ^Authorization$ "(.+)" HTTP_AUTHORIZATION=$1
SetEnvIfNoCase ^Authorization$ ".+username=\"(.+)\".+" HTTP_REMOTE_USER=$1
SetEnvIfNoCase ^Content-Type$ "(.+)" HTTP_CONTENT_TYPE=$1
SetEnvIfNoCase ^Content-Length$ "(.+)" HTTP_CONTENT_LENGTH=$1
SetEnvIfNoCase Server_Addr "(.+)" SERVER_ADDR=$1
SetEnvIfNoCase Request_Method "(.+)" REQUEST_METHOD=$1
SetEnvIfNoCase Request_Protocol "(.+)" REQUEST_PROTOCOL=$1
SetEnvIfNoCase Request_URI "(.+)" REQUEST_URI=$1
 
ErrorDocument 100 /cgi-bin/rewrite-test/index.php?g=100
ErrorDocument 101 /cgi-bin/rewrite-test/index.php?g=101
ErrorDocument 102 /cgi-bin/rewrite-test/index.php?g=102
ErrorDocument 200 /cgi-bin/rewrite-test/index.php?g=200
ErrorDocument 201 /cgi-bin/rewrite-test/index.php?g=201
ErrorDocument 202 /cgi-bin/rewrite-test/index.php?g=202
ErrorDocument 203 /cgi-bin/rewrite-test/index.php?g=203
ErrorDocument 204 /cgi-bin/rewrite-test/index.php?g=204
ErrorDocument 205 /cgi-bin/rewrite-test/index.php?g=205
ErrorDocument 206 /cgi-bin/rewrite-test/index.php?g=206
ErrorDocument 207 /cgi-bin/rewrite-test/index.php?g=207
ErrorDocument 300 /cgi-bin/rewrite-test/index.php?g=300
ErrorDocument 301 /cgi-bin/rewrite-test/index.php?g=301
ErrorDocument 302 /cgi-bin/rewrite-test/index.php?g=302
ErrorDocument 303 /cgi-bin/rewrite-test/index.php?g=303
ErrorDocument 304 /cgi-bin/rewrite-test/index.php?g=304
ErrorDocument 305 /cgi-bin/rewrite-test/index.php?g=305
ErrorDocument 306 /cgi-bin/rewrite-test/index.php?g=306
ErrorDocument 307 /cgi-bin/rewrite-test/index.php?g=307
ErrorDocument 400 /cgi-bin/rewrite-test/index.php?g=400
ErrorDocument 401 /cgi-bin/rewrite-test/index.php?g=401
ErrorDocument 402 /cgi-bin/rewrite-test/index.php?g=402
ErrorDocument 403 /cgi-bin/rewrite-test/index.php?g=403
ErrorDocument 404 /cgi-bin/rewrite-test/index.php?g=404
ErrorDocument 405 /cgi-bin/rewrite-test/index.php?g=405
ErrorDocument 406 /cgi-bin/rewrite-test/index.php?g=406
ErrorDocument 407 /cgi-bin/rewrite-test/index.php?g=407
ErrorDocument 408 /cgi-bin/rewrite-test/index.php?g=408
ErrorDocument 409 /cgi-bin/rewrite-test/index.php?g=409
ErrorDocument 410 /cgi-bin/rewrite-test/index.php?g=410
ErrorDocument 411 /cgi-bin/rewrite-test/index.php?g=411
ErrorDocument 412 /cgi-bin/rewrite-test/index.php?g=412
ErrorDocument 413 /cgi-bin/rewrite-test/index.php?g=413
ErrorDocument 414 /cgi-bin/rewrite-test/index.php?g=414
ErrorDocument 415 /cgi-bin/rewrite-test/index.php?g=415
ErrorDocument 416 /cgi-bin/rewrite-test/index.php?g=416
ErrorDocument 417 /cgi-bin/rewrite-test/index.php?g=417
ErrorDocument 418 /cgi-bin/rewrite-test/index.php?g=418
ErrorDocument 419 /cgi-bin/rewrite-test/index.php?g=419
ErrorDocument 420 /cgi-bin/rewrite-test/index.php?g=420
ErrorDocument 421 /cgi-bin/rewrite-test/index.php?g=421
ErrorDocument 422 /cgi-bin/rewrite-test/index.php?g=422
ErrorDocument 423 /cgi-bin/rewrite-test/index.php?g=423
ErrorDocument 424 /cgi-bin/rewrite-test/index.php?g=424
ErrorDocument 425 /cgi-bin/rewrite-test/index.php?g=425
ErrorDocument 426 /cgi-bin/rewrite-test/index.php?g=426
ErrorDocument 500 /cgi-bin/rewrite-test/index.php?g=500
ErrorDocument 501 /cgi-bin/rewrite-test/index.php?g=501
ErrorDocument 502 /cgi-bin/rewrite-test/index.php?g=502
ErrorDocument 503 /cgi-bin/rewrite-test/index.php?g=503
ErrorDocument 504 /cgi-bin/rewrite-test/index.php?g=504
ErrorDocument 505 /cgi-bin/rewrite-test/index.php?g=505
ErrorDocument 506 /cgi-bin/rewrite-test/index.php?g=506
ErrorDocument 507 /cgi-bin/rewrite-test/index.php?g=507
ErrorDocument 508 /cgi-bin/rewrite-test/index.php?g=508
ErrorDocument 509 /cgi-bin/rewrite-test/index.php?g=509
ErrorDocument 510 /cgi-bin/rewrite-test/index.php?g=510
 
RewriteEngine On
RewriteBase /
 
RewriteRule .* - [E=IN_AUTH_TYPE:%{AUTH_TYPE}]
RewriteRule .* - [E=IN_CONTENT_LENGTH:%{CONTENT_LENGTH}]
RewriteRule .* - [E=IN_CONTENT_TYPE:%{CONTENT_TYPE}]
RewriteRule .* - [E=IN_DATE_GMT:%{DATE_GMT}]
RewriteRule .* - [E=IN_DATE_LOCAL:%{DATE_LOCAL}]
RewriteRule .* - [E=IN_DOCUMENT_NAME:%{DOCUMENT_NAME}]
RewriteRule .* - [E=IN_DOCUMENT_PATH_INFO:%{DOCUMENT_PATH_INFO}]
RewriteRule .* - [E=IN_DOCUMENT_ROOT:%{DOCUMENT_ROOT}]
RewriteRule .* - [E=IN_DOCUMENT_URI:%{DOCUMENT_URI}]
RewriteRule .* - [E=IN_GATEWAY_INTERFACE:%{GATEWAY_INTERFACE}]
RewriteRule .* - [E=IN_LAST_MODIFIED:%{LAST_MODIFIED}]
RewriteRule .* - [E=IN_PATH_INFO:%{PATH_INFO}]
RewriteRule .* - [E=IN_PATH_TRANSLATED:%{PATH_TRANSLATED}]
RewriteRule .* - [E=IN_QUERY_STRING:%{QUERY_STRING}]
RewriteRule .* - [E=IN_QUERY_STRING_UNESCAPED:%{QUERY_STRING_UNESCAPED}]
RewriteRule .* - [E=IN_REMOTE_ADDR:%{REMOTE_ADDR}]
RewriteRule .* - [E=IN_REMOTE_HOST:%{REMOTE_HOST}]
RewriteRule .* - [E=IN_REMOTE_IDENT:%{REMOTE_IDENT}]
RewriteRule .* - [E=IN_REMOTE_PORT:%{REMOTE_PORT}]
RewriteRule .* - [E=IN_REMOTE_USER:%{REMOTE_USER}]
RewriteRule .* - [E=IN_REDIRECT_HANDLER:%{REDIRECT_HANDLER}]
RewriteRule .* - [E=IN_REDIRECT_QUERY_STRING:%{REDIRECT_QUERY_STRING}]
RewriteRule .* - [E=IN_REDIRECT_REMOTE_USER:%{REDIRECT_REMOTE_USER}]
RewriteRule .* - [E=IN_REDIRECT_STATUS:%{REDIRECT_STATUS}]
RewriteRule .* - [E=IN_REDIRECT_URL:%{REDIRECT_URL}]
RewriteRule .* - [E=IN_REQUEST_METHOD:%{REQUEST_METHOD}]
RewriteRule .* - [E=IN_REQUEST_URI:%{REQUEST_URI}]
RewriteRule .* - [E=IN_SCRIPT_FILENAME:%{SCRIPT_FILENAME}]
RewriteRule .* - [E=IN_SCRIPT_NAME:%{SCRIPT_NAME}]
RewriteRule .* - [E=IN_SERVER_ADMIN:%{SERVER_ADMIN}]
RewriteRule .* - [E=IN_SERVER_NAME:%{SERVER_NAME}]
RewriteRule .* - [E=IN_SERVER_ADDR:%{SERVER_ADDR}]
RewriteRule .* - [E=IN_SERVER_PORT:%{SERVER_PORT}]
RewriteRule .* - [E=IN_SERVER_PROTOCOL:%{SERVER_PROTOCOL}]
RewriteRule .* - [E=IN_SERVER_SIGNATURE:%{SERVER_SIGNATURE}]
RewriteRule .* - [E=IN_SERVER_SOFTWARE:%{SERVER_SOFTWARE}]
RewriteRule .* - [E=IN_USER_NAME:%{USER_NAME}]
RewriteRule .* - [E=IN_TZ:%{TZ}]
RewriteRule .* - [E=IN_API_VERSION:%{API_VERSION}]
RewriteRule .* - [E=IN_HTTPS:%{HTTPS}]
RewriteRule .* - [E=IN_HTTP_ACCEPT:%{HTTP_ACCEPT}]
RewriteRule .* - [E=IN_HTTP_ACCEPT_CHARSET:%{HTTP_ACCEPT_CHARSET}]
RewriteRule .* - [E=IN_HTTP_ACCEPT_ENCODING:%{HTTP_ACCEPT_ENCODING}]
RewriteRule .* - [E=IN_HTTP_ACCEPT_LANGUAGE:%{HTTP_ACCEPT_LANGUAGE}]
RewriteRule .* - [E=IN_HTTP_CACHE_CONTROL:%{HTTP_CACHE_CONTROL}]
RewriteRule .* - [E=IN_HTTP_CONNECTION:%{HTTP_CONNECTION}]
RewriteRule .* - [E=IN_HTTP_COOKIE:%{HTTP_COOKIE}]
RewriteRule .* - [E=IN_HTTP_FORWARDED:%{HTTP_FORWARDED}]
RewriteRule .* - [E=IN_HTTP_HOST:%{HTTP_HOST}]
RewriteRule .* - [E=IN_HTTP_KEEP_ALIVE:%{HTTP_KEEP_ALIVE}]
RewriteRule .* - [E=IN_HTTP_PROXY_CONNECTION:%{HTTP_PROXY_CONNECTION}]
RewriteRule .* - [E=IN_HTTP_REFERER:%{HTTP_REFERER}]
RewriteRule .* - [E=IN_HTTP_USER_AGENT:%{HTTP_USER_AGENT}]
RewriteRule .* - [E=IN_IS_SUBREQ:%{IS_SUBREQ}]
RewriteRule .* - [E=IN_ORIG_PATH_INFO:%{ORIG_PATH_INFO}]
RewriteRule .* - [E=IN_ORIG_PATH_TRANSLATED:%{ORIG_PATH_TRANSLATED}]
RewriteRule .* - [E=IN_ORIG_SCRIPT_FILENAME:%{ORIG_SCRIPT_FILENAME}]
RewriteRule .* - [E=IN_ORIG_SCRIPT_NAME:%{ORIG_SCRIPT_NAME}]
RewriteRule .* - [E=IN_PATH:%{PATH}]
RewriteRule .* - [E=IN_PHP_SELF:%{PHP_SELF}]
RewriteRule .* - [E=IN_REQUEST_FILENAME:%{REQUEST_FILENAME}]
RewriteRule .* - [E=IN_REQUEST_TIME:%{REQUEST_TIME}]
RewriteRule .* - [E=IN_SCRIPT_GROUP:%{SCRIPT_GROUP}]
RewriteRule .* - [E=IN_SCRIPT_USER:%{SCRIPT_USER}]
RewriteRule .* - [E=IN_THE_REQUEST:%{THE_REQUEST}]
RewriteRule .* - [E=IN_TIME:%{TIME}]
RewriteRule .* - [E=IN_TIME_DAY:%{TIME_DAY}]
RewriteRule .* - [E=IN_TIME_HOUR:%{TIME_HOUR}]
RewriteRule .* - [E=IN_TIME_MIN:%{TIME_MIN}]
RewriteRule .* - [E=IN_TIME_MON:%{TIME_MON}]
RewriteRule .* - [E=IN_TIME_SEC:%{TIME_SEC}]
RewriteRule .* - [E=IN_TIME_WDAY:%{TIME_WDAY}]
RewriteRule .* - [E=IN_TIME_YEAR:%{TIME_YEAR}]
RewriteRule .* - [E=IN_PATH:%{PATH}]
RewriteRule .* - [E=IN_SCRIPT_URI:%{SCRIPT_URI}]
RewriteRule .* - [E=IN_SCRIPT_URL:%{SCRIPT_URL}]
RewriteRule .* - [E=IN_UNIQUE_ID:%{UNIQUE_ID}]
 
RewriteRule .* - [E=ENV_PATH:%{ENV:PATH}]
RewriteRule .* - [E=ENV_SCRIPT_URI:%{ENV:SCRIPT_URI}]
RewriteRule .* - [E=ENV_SCRIPT_URL:%{ENV:SCRIPT_URL}]
RewriteRule .* - [E=ENV_UNIQUE_ID:%{ENV:UNIQUE_ID}]
 
RequestHeader set AUTH_TYPE "%{IN_AUTH_TYPE}e"
RequestHeader set CONTENT_LENGTH "%{IN_CONTENT_LENGTH}e"
RequestHeader set CONTENT_TYPE "%{IN_CONTENT_TYPE}e"
RequestHeader set DATE_GMT "%{IN_DATE_GMT}e"
RequestHeader set DATE_LOCAL "%{IN_DATE_LOCAL}e"
RequestHeader set DOCUMENT_NAME "%{IN_DOCUMENT_NAME}e"
RequestHeader set DOCUMENT_PATH_INFO "%{IN_DOCUMENT_PATH_INFO}e"
RequestHeader set DOCUMENT_ROOT "%{IN_DOCUMENT_ROOT}e"
RequestHeader set DOCUMENT_URI "%{IN_DOCUMENT_URI}e"
RequestHeader set GATEWAY_INTERFACE "%{IN_GATEWAY_INTERFACE}e"
RequestHeader set LAST_MODIFIED "%{IN_LAST_MODIFIED}e"
RequestHeader set PATH_INFO "%{IN_PATH_INFO}e"
RequestHeader set PATH_TRANSLATED "%{IN_PATH_TRANSLATED}e"
RequestHeader set QUERY_STRING "%{IN_QUERY_STRING}e"
RequestHeader set QUERY_STRING_UNESCAPED "%{IN_QUERY_STRING_UNESCAPED}e"
RequestHeader set REMOTE_ADDR "%{IN_REMOTE_ADDR}e"
RequestHeader set REMOTE_HOST "%{IN_REMOTE_HOST}e"
RequestHeader set REMOTE_IDENT "%{IN_REMOTE_IDENT}e"
RequestHeader set REMOTE_PORT "%{IN_REMOTE_PORT}e"
RequestHeader set REMOTE_USER "%{IN_REMOTE_USER}e"
RequestHeader set REDIRECT_HANDLER "%{IN_REDIRECT_HANDLER}e"
RequestHeader set REDIRECT_QUERY_STRING "%{IN_REDIRECT_QUERY_STRING}e"
RequestHeader set REDIRECT_REMOTE_USER "%{IN_REDIRECT_REMOTE_USER}e"
RequestHeader set REDIRECT_STATUS "%{IN_REDIRECT_STATUS}e"
RequestHeader set REDIRECT_URL "%{IN_REDIRECT_URL}e"
RequestHeader set REQUEST_METHOD "%{IN_REQUEST_METHOD}e"
RequestHeader set REQUEST_URI "%{IN_REQUEST_URI}e"
RequestHeader set SCRIPT_FILENAME "%{IN_SCRIPT_FILENAME}e"
RequestHeader set SCRIPT_NAME "%{IN_SCRIPT_NAME}e"
RequestHeader set SCRIPT_URI "%{IN_SCRIPT_URI}e"
RequestHeader set SCRIPT_URL "%{IN_SCRIPT_URL}e"
RequestHeader set SERVER_ADMIN "%{IN_SERVER_ADMIN}e"
RequestHeader set SERVER_NAME "%{IN_SERVER_NAME}e"
RequestHeader set SERVER_ADDR "%{IN_SERVER_ADDR}e"
RequestHeader set SERVER_PORT "%{IN_SERVER_PORT}e"
RequestHeader set SERVER_PROTOCOL "%{IN_SERVER_PROTOCOL}e"
RequestHeader set SERVER_SIGNATURE "%{IN_SERVER_SIGNATURE}e"
RequestHeader set SERVER_SOFTWARE "%{IN_SERVER_SOFTWARE}e"
RequestHeader set UNIQUE_ID "%{IN_UNIQUE_ID}e"
RequestHeader set USER_NAME "%{IN_USER_NAME}e"
RequestHeader set TZ "%{IN_TZ}e"
RequestHeader set API_VERSION "%{IN_API_VERSION}e"
RequestHeader set HTTPS "%{IN_HTTPS}e"
RequestHeader set HTTP_ACCEPT "%{IN_HTTP_ACCEPT}e"
RequestHeader set HTTP_ACCEPT_CHARSET "%{IN_HTTP_ACCEPT_CHARSET}e"
RequestHeader set HTTP_ACCEPT_ENCODING "%{IN_HTTP_ACCEPT_ENCODING}e"
RequestHeader set HTTP_ACCEPT_LANGUAGE "%{IN_HTTP_ACCEPT_LANGUAGE}e"
RequestHeader set HTTP_CACHE_CONTROL "%{IN_HTTP_CACHE_CONTROL}e"
RequestHeader set HTTP_CONNECTION "%{IN_HTTP_CONNECTION}e"
RequestHeader set HTTP_COOKIE "%{IN_HTTP_COOKIE}e"
RequestHeader set HTTP_FORWARDED "%{IN_HTTP_FORWARDED}e"
RequestHeader set HTTP_HOST "%{IN_HTTP_HOST}e"
RequestHeader set HTTP_KEEP_ALIVE "%{IN_HTTP_KEEP_ALIVE}e"
RequestHeader set HTTP_PROXY_CONNECTION "%{IN_HTTP_PROXY_CONNECTION}e"
RequestHeader set HTTP_REFERER "%{IN_HTTP_REFERER}e"
RequestHeader set HTTP_USER_AGENT "%{IN_HTTP_USER_AGENT}e"
RequestHeader set IS_SUBREQ "%{IN_IS_SUBREQ}e"
RequestHeader set ORIG_PATH_INFO "%{IN_ORIG_PATH_INFO}e"
RequestHeader set ORIG_PATH_TRANSLATED "%{IN_ORIG_PATH_TRANSLATED}e"
RequestHeader set ORIG_SCRIPT_FILENAME "%{IN_ORIG_SCRIPT_FILENAME}e"
RequestHeader set ORIG_SCRIPT_NAME "%{IN_ORIG_SCRIPT_NAME}e"
RequestHeader set PATH "%{IN_PATH}e"
RequestHeader set PHP_SELF "%{IN_PHP_SELF}e"
RequestHeader set REQUEST_FILENAME "%{IN_REQUEST_FILENAME}e"
RequestHeader set REQUEST_TIME "%{IN_REQUEST_TIME}e"
RequestHeader set SCRIPT_GROUP "%{IN_SCRIPT_GROUP}e"
RequestHeader set SCRIPT_USER "%{IN_SCRIPT_USER}e"
RequestHeader set THE_REQUEST "%{IN_THE_REQUEST}e"
RequestHeader set TIME "%{IN_TIME}e"
RequestHeader set TIME_DAY "%{IN_TIME_DAY}e"
RequestHeader set TIME_HOUR "%{IN_TIME_HOUR}e"
RequestHeader set TIME_MIN "%{IN_TIME_MIN}e"
RequestHeader set TIME_MON "%{IN_TIME_MON}e"
RequestHeader set TIME_SEC "%{IN_TIME_SEC}e"
RequestHeader set TIME_WDAY "%{IN_TIME_WDAY}e"
RequestHeader set TIME_YEAR "%{IN_TIME_YEAR}e"
 
SetEnvIfNoCase ^WWW-Auth "(.+)" HTTP_WWW_AUTHORIZATION=$1
SetEnvIfNoCase ^If "(.+)" HTTP_IF_MODIFIED_SINCE=$1
SetEnvIfNoCase ^If-None-Match$ "(.+)" HTTP_IF_NONE_MATCH=$1
SetEnvIfNoCase ^Cache-Control$ "(.+)" HTTP_CACHE_CONTROL=$1
SetEnvIfNoCase ^Connection$ "(.+)" HTTP_CONNECTION=$1
SetEnvIfNoCase ^Keep-Alive$ "(.+)" HTTP_KEEP_ALIVE=$1
SetEnvIfNoCase ^Authorization$ "(.+)" HTTP_AUTHORIZATION=$1
SetEnvIfNoCase ^Content-Type$ "(.+)" HTTP_CONTENT_TYPE=$1
SetEnvIfNoCase ^Content-Length$ "(.+)" HTTP_CONTENT_LENGTH=$1
SetEnvIfNoCase ^Authorization$ ".+username=\"([a-zA-Z0-9]+)\".+" REMOTE_USER=$1
SetEnvIfNoCase Server_Addr "(.+)" SERVER_ADDR=$1
SetEnvIfNoCase Request_Method "(.+)" REQUEST_METHOD=$1
SetEnvIfNoCase Request_Protocol "(.+)" REQUEST_PROTOCOL=$1
SetEnvIfNoCase Request_URI "(.+)" REQUEST_URI=$1
 
RequestHeader set IF_MODIFIED_SINCE "%{HTTP_IF_MODIFIED_SINCE}e"
RequestHeader set IF_NONE_MATCH "%{HTTP_IF_NONE_MATCH}e"
RequestHeader set CACHE_CONTROL "%{HTTP_CACHE_CONTROL}e"
RequestHeader set CONNECTION "%{HTTP_CONNECTION}e"
RequestHeader set KEEP_ALIVE "%{HTTP_KEEP_ALIVE}e"
RequestHeader set AUTHORIZATION "%{HTTP_AUTHORIZATION}e"
RequestHeader set REMOTE_USER "%{REMOTE_USER}e"
RequestHeader set CONTENT_TYPE "%{HTTP_CONTENT_TYPE}e"
RequestHeader set CONTENT_LENGTH "%{HTTP_CONTENT_LENGTH}e"
RequestHeader set SERVER_ADDR "%{SERVER_ADDR}e"
RequestHeader set REQUEST_METHOD "%{REQUEST_METHOD}e"
RequestHeader set REQUEST_PROTOCOL "%{REQUEST_PROTOCOL}e"
RequestHeader set REQUEST_URI "%{REQUEST_URI}e"
 
RequestHeader set UNIQUE_ID "%{ENV_UNIQUE_ID}e"
RequestHeader set SCRIPT_URL "%{ENV_SCRIPT_URL}e"
RequestHeader set SCRIPT_URI "%{ENV_SCRIPT_URI}e"
RequestHeader set PATH "%{ENV_PATH}e"
 
Options +ExecCGI +FollowSymLinks
 
Order Deny,Allow
Deny from All
Allow from 208.113.134.190  64.111.114.111 208.113.134.203 208.113.152.201 env=REDIRECT_STATUS
Satisfy Any
 
SecFilterEngine Off

More Mod_Security (1)

#
# Order Deny,Allow
# First, all Allow directives are evaluated; at least one must match, or the request is rejected.
# Next, all Deny directives are evaluated. If any matches, the request is rejected.
# Last, any requests which do not match an Allow or a Deny directive are denied by default.
#
Order Allow,Deny
Allow from all
Deny from 217.219.
 
#Order Deny,Allow
# First, all Deny directives are evaluated; if any match, the request is denied unless it also matches an Allow directive.
# Any requests which do not match any Allow or Deny directives are permitted.
 
#SetEnvIf content-type (multipart/form-data)(.*) NEW_CONTENT_TYPE=application/x-www-form-urlencoded$2 OLD_CONTENT_TYPE=$1$2
#RequestHeader set content-type %{NEW_CONTENT_TYPE}e env=NEW_CONTENT_TYPE
SetEnvIfNoCase Content-Type "^multipart/form-data" !MODSEC_NOPOSTBUFFERING
SetEnvIfNoCase Content-Type "^application/x-www-form-urlencoded" !MODSEC_NOPOSTBUFFERING
SetEnv suppress-error-charset
SetEnvIfNoCase Content-Type "^multipart/form-data" !MODSEC_NOPOSTBUFFERING
 
SetEnvIf Request_URI "^/(cgi-bin/search\.php|cgi-bin/java\.cgi|wp-admin/.*)" MODSEC_ENABLE=Off
SetEnvIf Request_URI "^/(online-tools/js-compress.*)" "MODSEC_NOPOSTBUFFERING=Do not buffer file uploads"
SetEnvIfNoCase Remote_Addr ^208\.113\.134\.190$ MODSEC_ENABLE=Off
SetEnvIfNoCase Remote_Addr ^64\.111\.114\.111$ MODSEC_ENABLE=Off
 
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# TZ: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
SetEnv TZ America/Indianapolis
 
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
SetEnv SERVER_ADMIN webmaster@askapache.com
 
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off
 
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
#
Options -Indexes -Includes -ExecCGI -MultiViews
 
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
DirectoryIndex index.php
 
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
Action php5-cgi /bin/php.cgi
 
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler php5-cgi .php .inc
 
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddDefaultCharset UTF-8
 
#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#
AddType 'application/rdf+xml; charset=UTF-8' .rdf
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml.gz
AddType 'text/html; charset=UTF-8' .html
AddType 'text/html; charset=UTF-8' .html.gz
AddType application/octet-stream .rar .chm .bz2 .tgz .msi .pdf .exe
AddType application/vnd.ms-excel .csv
AddType application/x-httpd-php-source .phps
AddType application/x-pilot .prc .pdb
AddType application/x-shockwave-flash .swf
AddType application/xrds+xml .xrdf
AddType text/plain .ini .sh .bsh .bash .awk .nawk .gawk .csh .var .c .in .h .asc .md5 .sha .sha1
AddType video/x-flv .flv
 
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
 
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/html

Error Documents

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
#100 Continue
#101 Switching Protocols
#102 Processing
#200 OK
#201 Created
#202 Accepted
#203 Non-Authoritative Information
#204 No Content
#205 Reset Content
#206 Partial Content
#207 Multi-Status
#300 Multiple Choices
#301 Moved Permanently
#302 Found
#303 See Other
#304 Not Modified
#305 Use Proxy
#306 unused
#307 Temporary Redirect
#400 Bad Request
#401 Authorization Required
#402 Payment Required
#403 Forbidden
#404 Not Found
#405 Method Not Allowed
#406 Not Acceptable
#407 Proxy Authentication Required
#408 Request Time-out
#409 Conflict
#410 Gone
#411 Length Required
#412 Precondition Failed
#413 Request Entity Too Large
#414 Request-URI Too Large
#415 Unsupported Media Type
#416 Requested Range Not Satisfiable
#417 Expectation Failed
#418 unused
#419 unused
#420 unused
#421 unused
#422 Unprocessable Entity
#423 Locked
#424 Failed Dependency
#425 No code
#426 Upgrade Required
#500 Internal Server Error
#501 Method Not Implemented
#502 Bad Gateway
#503 Service Temporarily Unavailable
#504 Gateway Time-out
#505 HTTP Version Not Supported
#506 Variant Also Negotiates
#507 Insufficient Storage
#508 unused
#509 unused
#510 Not Extended
 
#ErrorDocument 100 /e/100_CONTINUE.html
#ErrorDocument 101 /e/101_SWITCHING_PROTOCOLS.html
#ErrorDocument 102 /e/102_PROCESSING.html
 
#ErrorDocument 200 /e/200_OK.html
#ErrorDocument 201 /e/201_CREATED.html
#ErrorDocument 202 /e/202_ACCEPTED.html
#ErrorDocument 203 /e/203_NON_AUTHORITATIVE.html
#ErrorDocument 204 /e/204_NO_CONTENT.html
#ErrorDocument 205 /e/205_RESET_CONTENT.html
#ErrorDocument 206 /e/206_PARTIAL_CONTENT.html
#ErrorDocument 207 /e/207_MULTI_STATUS.html
 
#ErrorDocument 300 /e/300_MULTIPLE_CHOICES.html
#ErrorDocument 301 /e/301_MOVED_PERMANENTLY.html
#ErrorDocument 302 /e/302_MOVED_TEMPORARILY.html
#ErrorDocument 303 /e/303_SEE_OTHER.html
#ErrorDocument 304 /e/304_NOT_MODIFIED.html
#ErrorDocument 305 /e/305_USE_PROXY.html
#ErrorDocument 307 /e/307_TEMPORARY_REDIRECT.html
 
ErrorDocument 400 /e/400_BAD_REQUEST.html
ErrorDocument 401 /e/401_UNAUTHORIZED.html
ErrorDocument 402 /e/402_PAYMENT_REQUIRED.html
ErrorDocument 403 /e/403_FORBIDDEN.html
#ErrorDocument 404 /e/404_NOT_FOUND.html
ErrorDocument 404 /index.php?error=404
ErrorDocument 405 /e/405_METHOD_NOT_ALLOWED.html
ErrorDocument 406 /e/406_NOT_ACCEPTABLE.html
ErrorDocument 407 /e/407_PROXY_AUTHENTICATION_REQUIRED.html
ErrorDocument 408 /e/408_REQUEST_TIME_OUT.html
ErrorDocument 409 /e/409_CONFLICT.html
ErrorDocument 410 /e/410_GONE.html
ErrorDocument 411 /e/411_LENGTH_REQUIRED.html
ErrorDocument 412 /e/412_PRECONDITION_FAILED.html
ErrorDocument 413 /e/413_REQUEST_ENTITY_TOO_LARGE.html
ErrorDocument 414 /e/414_REQUEST_URI_TOO_LARGE.html
ErrorDocument 415 /e/415_UNSUPPORTED_MEDIA_TYPE.html
ErrorDocument 416 /e/416_RANGE_NOT_SATISFIABLE.html
ErrorDocument 417 /e/417_EXPECTATION_FAILED.html
ErrorDocument 422 /e/422_UNPROCESSABLE_ENTITY.html
ErrorDocument 423 /e/423_LOCKED.html
ErrorDocument 424 /e/424_FAILED_DEPENDENCY.html
ErrorDocument 426 /e/426_UPGRADE_REQUIRED.html
ErrorDocument 500 /e/500_INTERNAL_SERVER_ERROR.html
ErrorDocument 501 /e/501_NOT_IMPLEMENTED.html
ErrorDocument 502 /e/502_BAD_GATEWAY.html
ErrorDocument 503 /e/503_SERVICE_UNAVAILABLE.html
ErrorDocument 504 /e/504_GATEWAY_TIME_OUT.html
ErrorDocument 505 /e/505_VERSION_NOT_SUPPORTED.html
ErrorDocument 506 /e/506_VARIANT_ALSO_VARIES.html
ErrorDocument 507 /e/507_INSUFFICIENT_STORAGE.html
ErrorDocument 510 /e/510_NOT_EXTENDED.html

Caching

#
#  HEADERS and CACHING
#
Header unset Pragma
FileETag None
Header unset ETag
 
# 1 YEAR
<filesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$">
Header unset P3P
Header unset Pragma
FileETag None
Header unset ETag
Header set Cache-Control "public,max-age=29030400"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
Header unset Last-Modified
</filesMatch>
 
# 2 HOURS
<filesMatch "\.(html|htm|xml|txt|xsl|rdf|rss)$">
<ifModule mod_expires.c>
ExpiresActive On
ExpiresDefault A3600
</ifModule>
</filesMatch>

Redirect Hack

#Redirect 400 /e/400
#Redirect 401 /e/401
#Redirect 402 /e/402
#Redirect 403 /e/403
Redirect 404 /index.php?error=404
#Redirect 405 /e/405
#Redirect 406 /e/406
#Redirect 407 /e/407
#Redirect 408 /e/408
#Redirect 409 /e/409
#Redirect 410 /e/410
#Redirect 411 /e/411
#Redirect 412 /e/412
#Redirect 413 /e/413
#Redirect 414 /e/414
#Redirect 415 /e/415
#Redirect 416 /e/416
#Redirect 417 /e/417
#Redirect 418 /e/418
#Redirect 419 /e/419
#Redirect 420 /e/420
#Redirect 421 /e/421
#Redirect 422 /e/422
#Redirect 423 /e/423
#Redirect 424 /e/424
#Redirect 425 /e/425
#Redirect 426 /e/426
#Redirect 500 /e/500
#Redirect 501 /e/501
#Redirect 502 /e/502
#Redirect 503 /e/503
#Redirect 504 /e/504
#Redirect 505 /e/505
#Redirect 506 /e/506
#Redirect 507 /e/507
#Redirect 508 /e/508
#Redirect 509 /e/509
#Redirect 510 /e/510

301 PERMANENT REDIRECTS

#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
#
Redirect 301 /12-lessons-for-those-afraid-of-css.html http://www.askapache.com/css/12-lessons-for-those-afraid-of-css.html
Redirect 301 /2006/htaccess/htaccesselite-ultimate-htaccess-article.html http://www.askapache.com/htaccess/apache-htaccess.html
Redirect 301 /2007/phpbb/sending-post-form-data-with-php-curl.html http://www.askapache.com/htaccess/sending-post-form-data-with-php-curl.html
Redirect 301 /2007/webmaster/custom-phpini-with-fastcgi-on-dreamhost.html http://www.askapache.com/dreamhost/custom-phpini-with-fastcgi-on-dreamhost.html
Redirect 301 /2007/webmaster/custom-phpini-with-fastcgi-on-dreamhost.html http://www.askapache.com/dreamhost/custom-phpini-with-fastcgi-on-dreamhost.html
Redirect 301 /2007/webmaster/php-and-ajax-shell-console.html http://www.askapache.com/tools/php-and-ajax-shell-console.html
Redirect 301 /27-request-methods-for-use-with-apache-and-rewritecond-and-htaccess.html http://www.askapache.com/htaccess/27-request-methods-for-use-with-apache-and-rewritecond-and-htaccess.html
Redirect 301 /404-google-wordpress-plugin.html http://www.askapache.com/seo/404-google-wordpress-plugin.html
Redirect 301 /503-service-temporarily-unavailable.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /Overview-about.rdf http://www.askapache.com/askapache-home.rdf
Redirect 301 /abbr-acronym.html http://www.askapache.com/xhtml/abbr-acronym.html
Redirect 301 /adsense-robots.html http://www.askapache.com/google/adsense-robots.html
Redirect 301 /alexa-toolbar-firefox.html http://www.askapache.com/tools/alexa-toolbar-firefox.html
Redirect 301 /allowing-access-from-1-static-ip-and-deny-the-rest.html http://www.askapache.com/htaccess/apache-htaccess.html
Redirect 301 /anti-virus-spyware-rootkit.html http://www.askapache.com/security/anti-virus-spyware-rootkit.html
Redirect 301 /apache-ssl-in-htaccess-examples.html http://www.askapache.com/htaccess/apache-ssl-in-htaccess-examples.html
Redirect 301 /awk-tutorial.html http://www.askapache.com/awk/awk-tutorial.html
Redirect 301 /best-adsense-optimization.html http://www.askapache.com/wordpress/best-adsense-optimization.html
Redirect 301 /commonly-used-htaccess-code-examples.html http://www.askapache.com/htaccess/commonly-used-htaccess-code-examples.html
Redirect 301 /css-background-image-sprite.html http://www.askapache.com/css/css-background-image-sprite.html
Redirect 301 /css-browser-screenshots.html http://www.askapache.com/tools/css-browser-screenshots.html
Redirect 301 /css-class-example.html http://www.askapache.com/css/css-class-example.html
Redirect 301 /curl-multi-downloads.html http://www.askapache.com/php/curl-multi-downloads.html
Redirect 301 /custom-boot-menu-in-windows-xp.html http://www.askapache.com/windows/custom-boot-menu-in-windows-xp.html
Redirect 301 /donate http://www.dreamhost.com/donate.cgi?id=8261
Redirect 301 /donate/ http://www.dreamhost.com/donate.cgi?id=8261
Redirect 301 /htaccess.txt http://z.askapache.com/p/htaccess.txt
Redirect 301 /htaccess/404-errorpages.html http://www.askapache.com/seo/google-ajax-search-seo-tips.html
Redirect 301 /htaccess/feedsmith http://www.askapache.com/htaccess/feedsmith-htaccess.html
Redirect 301 /htaccess/http-status-codes.html http://www.askapache.com/htaccess/apache-status-code-headers-errordocument.html
Redirect 301 /htaccess/instruct-search-engines-to-come-back-to-site-after-you-finish-working-on-it.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /htaccess/speed-up-the-apache-web-server-with-configuration-hacks.html http://www.askapache.com/htaccess/apache-web-server-speed-configuration-hacks.html
Redirect 301 /instruct-search-engines-to-come-back-to-site-after-you-finish-working-on-it.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /security/bypassing-vlan.html http://www.askapache.com/security/hacking-vlan-switched-networks.html
Redirect 301 /security/bypassing-vlanbypassing-vlan.html http://www.askapache.com/security/hacking-vlan-switched-networks.html
Redirect 301 /security/rigging-the-dreamhost-site-of-the-month-contest.html http://www.askapache.com/dreamhost/rigging-the-dreamhost-site-of-the-month-contest.html
Redirect 301 /seo/tailrankcom-robot.html http://www.askapache.com/seo/tailrank-robot.html
Redirect 301 /webmaster/caching-tutorial-for-webmasters.html http://www.askapache.com/htaccess/caching-tutorial-for-webmasters.html
Redirect 301 /webmaster/lft-traceroute-tool.html http://www.askapache.com/tools/lft-traceroute-tool.html

301 PERMANENT REDIRECTMATCH

#
#  PERMANENT REDIRECTMATCH
#
#RedirectMatch 301 ^/&(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/(.+)\.html/$ http://www.askapache.com/$1.html
RedirectMatch 301 ^/&amp(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/.*feed\.gif$ http://z.askapache.com/feed.gif
RedirectMatch 301 ^/([^/]+)//$ http://www.askapache.com/$1/
RedirectMatch 301 ^/(.+)/htaccesselite-ultimate-htaccess-article.html(.*) http://www.askapache.com/htaccess/apache-htaccess.html
RedirectMatch 301 ^/(.+)\.html/([a-z][a-z])/$ http://www.askapache.com/$1.html
RedirectMatch 301 ^/([\(]+)(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/([^9]*)9O1X.3y(.*)/(.*)$ http://www.askapache.com/$2
RedirectMatch 301 ^/.3y(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/200([0-9])/([0-9])(.*)$ http://www.askapache.com/top-100/
RedirectMatch 301 ^/200([0-9])/([^01])(.*)$ http://www.askapache.com/$2$3
RedirectMatch 301 ^/about/glossary(.*)$ http://www.askapache.com/glossary$1
RedirectMatch 301 ^/apache-speed(.*)$ http://www.askapache.com/htaccess/apache-speed$1
RedirectMatch 301 ^/category/(.+)$ http://www.askapache.com/$1
RedirectMatch 301 ^/docs/(.*)$ http://askapache.info/$1
RedirectMatch 301 ^/htaccess/feedsmith-htaccess(.*) http://www.askapache.com/htaccess/redirecting-wordpress-feeds-to-feedburner.html
RedirectMatch 301 ^/robots-txt(.*)$ http://www.askapache.com/robots.txt
RedirectMatch 301 ^/hosting/?$ http://www.askapache.com/hosting/
RedirectMatch 301 ^/.+favicon.ico$ http://www.askapache.com/favicon.ico
#RedirectMatch 301 ^/wp-content/uploads/(.*)$ http://z.askapache.com/uploads/$1
#RedirectMatch 301 ^/z/(.+)$ http://z.askapache.com/$1
#RedirectMatch 301 ^/(z|t|i|j|c|p)/(.*)$ http://z.askapache.com/$1/$2
 
#
#  TEMPORARY REDIRECTMATCH
#
RedirectMatch 307 ^/getflash/?$ http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash
RedirectMatch 307 ^/dream/?$ http://www.askapache.com/dreamhost/
RedirectMatch 307 ^/(cse|apachecse|apachecsetest|apachesearch)/?$ http://www.google.com/coop/cse?cx=002660089121042511758%3Akk7rwc2gx0i
RedirectMatch 307 ^/search/lr-lang(.*)$ http://feeds.askapache.com/apache/htaccess
 
#
#  PERMANENT GONE
#
RedirectMatch 410 ^/funny(.*)

My Favorite modsec_v1 stuff

# Pass: Allows request to continue, further filters could still halt request.
# Allow: Allows matching requests through, will not be tested against other filters.
# Deny: Stops the request outright, returns a HTTP 500 error code by default.
# Status: Used to specify an alternate HTTP error code.
# Redirect: Matching requests are redirected to the provided URL.
# Exec: Allows execution of a local system binary or script.
# Log: Logs request only.
# Nolog: Does not log request.
# Chain: Allows you to create list of filters for more granulated security. All filters must be cleared before action is taken with the final filter.
 
SecFilterEngine On
SecFilterCheckURLEncoding On
SecFilterCheckUnicodeEncoding Off
SecFilterScanPOST On
 
#SecUploadKeepFiles On
#SecUploadDir /home/askapache/sites/askapache.com/logs/sec-upload
#SecUploadApproveScript /home/askapache/sites/askapache.com/htdocs/cgi-bin/check.sh
 
#SecRuleEngine On
#SecAuditEngine On
#SecAuditEngine Off
SecAuditEngine RelevantOnly
SecAuditLog /home/askapache/sites/askapache.com/logs/modsec_audit.log
SecFilterDebugLog /home/askapache/sites/askapache.com/logs/modsec_debug.log
SecFilterDebugLevel 1
#SecAuditLogRelevantStatus "^(?:1|2(?!00)|5|4(?!04))"
SecAuditLogRelevantStatus "^(1|2(?!00)|4([0-9](0|1|2|5|6|7|8|9))|5)"
SecFilterForceByteRange 1 255
 
#SecFilterInheritance Off
# 0 EMERGENCY - system is unusable
# 1 ALERT - action must be taken immediately
# 2 CRITICAL - critical conditions
# 3 ERROR - error conditions
# 4 WARNING - warning conditions
# 5 NOTICE - normal but significant conditions
# 6 INFO - informational
# 7 DEBUG - debug-level messages
 
SecFilterDefaultAction "deny,severity:6,status:403"
 
#SecFilterSelective REQUEST_METHOD "POST" "pass,auditlog,severity:6"
SecFilterSelective REQUEST_URI "^/(xmlrpc|wp-comments-post)\.php" "pass,log,auditlog,severity:6"
#SecFilterSelective REMOTE_ADDR ^$ "pass,log,auditlog,severity:6"
#SecFilterSelective REMOTE_ADDR ^203\.221\.91\.20$ "pass,log,auditlog,severity:6"
 
#SecFilterSelective REQUEST_URI "^/htaccess.*" "pass,log,auditlog"
#SecFilterSelective REQUEST_URI "^/feed.*" "pass,log,auditlog"
#SecFilterSelective REQUEST_URI "^/.*trackback.*" "pass,log,auditlog"
#SecFilterSelective REQUEST_URI "^/valid.*" "pass,log,auditlog"
 
#Enforce proper HTTP requests
SecFilterSelective SERVER_PROTOCOL "!^HTTP/(0\.9|1\.0|1\.1)$" "id:340000,rev:1,severity:6,msg:'Bad HTTP Protocol'"
 
# Only accept request encodings we know how to handle
SecFilterSelective REQUEST_METHOD "!^(GET|HEAD|POST)$" "chain,id:340001,rev:1,severity:6,msg:'Restricted HTTP function,status:405'"
SecFilterSelective HTTP_Content-Type "!(^$|^application/x-www-form-urlencoded$|^multipart/form-data)"
 
# Require Content-Length to be provided with every POST request
SecFilterSelective REQUEST_METHOD "^POST$" "chain,id:340003,rev:1,severity:6,msg:'Content Length not provided with POST',status:411"
SecFilterSelective HTTP_Content-Length "^$"
 
# Don't accept transfer encodings we know we don't handle
# (and you don't need it anyway)
SecFilterSelective HTTP_Transfer-Encoding "!^$" "id:340004,rev:1,severity:6,msg:'Dis-allowed Transfer Encoding'"
 
#Generic rule for allowed characters, adjust for your site before activating
##SecFilterSelective REQUEST_URI "!^[a-zA-Z0-9\.\+\_\/\-\?\=\&\%\#]+$" "chain,id:390002,rev:1,severity:4,msg:'Restricted HTTP character set'"
##SecFilterSelective REQUEST_URI "!^/(openid|wp-admin|wp-includes|wp-content|wp-login.php)"
 
#HTTP response splitting generic sigs
#SecFilter "Content-Length\:.*Content-Type\:.*Content-Type\:" "id:340005,rev:1,severity:4,msg:'HTTP response splitting'"
 
#HTTP response splitting generic sigs
#SecFilter "Content-Length\:" "chain,id:340006,rev:1,severity:4,msg:'HTTP response splitting'"
#SecFilter "Content-Type\:"
 
#catch smuggling attacks
#SecFilter "^(GET|POST).*Host:.*^(GET|POST)"  "id:300012,rev:1,severity:4,msg:'catch smuggling attacks'"
 
#XSS insertion into Content-Type
#SecFilterSelective THE_REQUEST "Content-Type\:.*(<[[:space:]]*(script|about|applet|activex|chrome)*>.*(script|about|applet|activex|chrome)[[:space:]]*>|onmouseover=|javascript\:)" "id:300002,rev:1,severity:4,msg:'XSS attack in Content-type header'"
 
#Code injection via content length
#SecFilterSelective HTTP_Content-Length|HTTP_USER_AGENT "\;(system|passthru|exec)\(" "id:330003,rev:1,severity:4,msg:'Code Injection in Content-Length header'"
 
#Don't accept chunked encodings modsecurity can not look at these, so this is a hole that can bypass your rules, the rule before this one should cover this, but hey paranoia is cheap
#SecFilterSelective HTTP_Transfer-Encoding "chunked" "id:300003,rev:1,severity:4,msg:'Chunked Transfer Encoding denied'"
 
##generic recursion signatures
#SecFilterSelective REQUEST_URI "\.\./\.\./" "id:300004,rev:2,severity:4,msg:'Generic Path Recursion1 denied'"
#SecFilterSelective THE_REQUEST "\.\|\./\.\|\./\.\|" "id:300005,rev:1,severity:4,msg:'Generic Path Recursion2 denied'"
#SecFilterSelective THE_REQUEST "\.\.\./" "id:300006,rev:1,severity:4,msg:'Bogus Path denied'"
 
#Generic PHP exploit signatures
#SecFilterSelective REQUEST_URI "<\?php (chr|fwrite|fopen|system|echr|passthru|popen|proc_open|shell_exec|exec|proc_nice|proc_terminate|proc_get_status|proc_close|pfsockopen|leak|apache_child_terminate|posix_kill|posix_mkfifo|posix_setpgid|posix_setsid|posix_setuid|phpinfo)\(.*\)\;" "id:330002,rev:1,severity:4,msg:'Generic PHP exploit pattern denied'"
 
#Prevent SQL injection in cookies
##SecFilterSelective COOKIE_VALUES "((select|grant|delete|insert|drop|alter|replace|truncate|update|create|rename|describe)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]+[[:space:]]+(from|into|table|database|index|view)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]|UNION SELECT.*\'.*\'.*,[0-9].*INTO.*FROM)" "id:300011,rev:1,severity:4,msg:'Generic SQL injection in cookie'"
 
#Prevent SQL injection in UA
##SecFilterSelective HTTP_USER_AGENT "((select|grant|delete|insert|drop|alter|replace|truncate|update|create|rename|describe)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]+[[:space:]]+(from|into|table|database|index|view)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]|UNION SELECT.*\'.*\'.*,[0-9].*INTO.*FROM)" "id:300012,rev:1,severity:4,msg:'Generic SQL injection in User Agent header'"
 
# Generic filter to prevent SQL injection attacks
# Understand that all SQL filters are very limited and are very difficult to prevent false postives and negatives.
# Please report false positives/negatives to mike@gotroot.com
#SecFilter "((select|grant|delete|insert|drop|alter|replace|truncate|update|create|rename|describe)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]+[[:space:]]+(from|into|table|database|index|view)[[:space:]]+[A-Z|a-z|0-9|\*| |\,]|UNION SELECT.*\'.*\'.*,[0-9].*INTO.*FROM)" "id:300013,rev:1,severity:4,msg:'Generic SQL injection protection'"
 
#generic XSS PHP attack types
##SecFilterSelective REQUEST_URI "\.php\?" "chain,id:300010,rev:1,severity:4,msg:'Generic PHP XSS exploit pattern denied'"
#SecFilter "(javascript\:/(.*new\x20ActiveXObject.*Sh\.regwrite|.*window\.opener\.document\.body.\innerHTML=window\.opener\.document\.body\.innerHTML\.replace)|onmouseover=\'javascript)"
 
#Generic XSS filter
#please report false positives
##SecFilterSelective REQUEST_URI "!/mt\.cgi" "chain,msg:'XSS2'"
#SecFilter "<[[:space:]]*(script|about|applet|activex|chrome)*>.*(script|about|applet|activex|chrome)[[:space:]]*>"
 
#XSS in referrer and UA headers
##SecFilterSelective HTTP_REFERER|HTTP_USER_AGENT "<[[:space:]]*(script|about|applet|activex|chrome)*>.*(script|about|applet|activex|chrome)[[:space:]]*>" "msg:'XSS3'"
 
#HTTP header PHP code injection attacks
##SecFilterSelective HTTP_CLIENT_IP|HTTP_USER_AGENT|HTTP_Referer "(<\?php|<[[:space:]]?\?[[:space:]]?php|<\? php)" "msg:'PHP1'"
 
#Generic PHP remote file injection
##SecFilterSelective REQUEST_URI "!(/do_command)" "chain,msg:'PHP2'"
##SecFilterSelective REQUEST_URI "\.php\?.*=(https?|ftp)\:/.*(cmd|command)="
 
#script, perl, etc. code in HTTP_Referer string
##SecFilterSelective HTTP_Referer "\#\!.*/" "msg:'perl script1'"
 
#remote file inclusion generic attack signature
#SecFilterSelective THE_REQUEST  "\.(dat|gif|jpg|png|bmp|txt|vir|dot)\?" "chain,msg:'remote 1'"
#SecFilter "((name|pm_path|pagina|path|include_location|root|page|open)=(http|https|ftp)|(cmd|command|inc)=)"
 
#remote file inclusion generic attack signature
#SecFilterSelective THE_REQUEST  "\.(dat|gif|jpg|png|bmp|txt|vir|dot)\?\&(cmd|command|inc|name)=" "msg:'remote2'"
 
#remote file inclusion generic attack signature
#SecFilterSelective ARGS  "\.(dat|gif|jpg|png|bmp|txt|vir|dot)" "chain,msg:'file inclusion1'"
#SecFilter "\?\&(cmd|inc|name)="
 
#remote file inclusion generic attack signature
#SecFilterSelective ARGS  "\.(dat|gif|jpg|png|bmp|txt|vir|dot)\?\&(cmd|inc|name)=" "msg:'file inclusion2'"
 
#remote file inclusion generic attack signature
#SecFilterSelective REQUEST_URI  "\.php\?.*=(http|https|ftp)\:/.*\?&cmd=" "msg:'file inclusion3'"
 
#Bogus file extensions generic signature
#SecFilterSelective THE_REQUEST  "[A-Za-z0-9]\.(gif|jpg|png|bmp)\.txt" "msg:'file extension'"
 
#PHP remote path attach generic signature
#SecFilterSelective REQUEST_URI  "\.ph(p(3|4)?).*path=(http|https|ftp)\:/" "msg:'remote path1'"
#SecFilterSelective REQUEST_URI  "\.php.*path=(http|https|ftp)\:/" "msg:'remote path2'"
 
#generic php attack sigs
#SecFilterSelective REQUEST_URI "(&(cmd|command)=(id|uname)\x20|cmd\?(cmd|command)=|(spy|cmd|cmd_out|sh)\.(gif|jpg|png|bmp|txt)\?&(cmd|command)=|\.php\?&(cmd|command)=)" "msg:'php attack1'"
 
# WEB-MISC apache directory disclosure attempt
#SecFilterSelective THE_REQUEST "////" "msg:'apache directory disclosure'"
 
#PHP defenses
##SecFilterSelective ARG_PHPSESSID "!^$" "msg:'something in phpsessid'"
##SecFilterSelective COOKIE_PHPSESSID "!^$" "msg:'something in cookie phpsessid'"
 
#PHP defenses
##SecFilterSelective COOKIE_ASKAPACHEID "!^[0-9a-z]*$" "msg:'bad value for cookie'"
 
#cross site scripting attempt TYPE + JAVASCRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]text\/javascript" "msg:'cross-site1'"
 
#cross site scripting attempt STYLE + JAVASCRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]application\/x-javascript" "msg:'cross-site1'"
 
#cross site scripting attempt STYLE + JSCRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]text\/jscript" "msg:'cross-site1'"
 
# cross site scripting attempt STYLE + VBSCRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]text\/vbscript" "msg:'cross-site1'"
 
#cross site scripting attempt STYLE + VBSCRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]application\/x-vbscript" "msg:'cross-site1'"
 
#cross site scripting attempt STYLE + ECMACRIPT
##SecFilterSelective THE_REQUEST "TYPE\s*=\s*[\'\"]text\/ecmascript" "msg:'cross-site1'"
 
# cross site scripting attempt STYLE + EXPRESSION
##SecFilterSelective THE_REQUEST "STYLE[\s]*=[\s]*[^>]expression[\s]*\(" "msg:'cross-site1'"
 
#cross site scripting attempt STYLE + EXPRESSION
##SecFilterSelective THE_REQUEST "[\s]*expression[\s]*\([^}]}[\s]*<\/STYLE>" "msg:'cross-site1'"
 
# cross site scripting attempt using XML
##SecFilterSelective THE_REQUEST "<!\[CDATA\[<\]\]>SCRIPT" "msg:'cross-site1'"
 
#cross site scripting attempt executing hidden Javascript
##SecFilterSelective THE_REQUEST "eval[\s]*\([\s]*[^\.]\.innerHTML[\s]*\)" "msg:'cross-site1'"
 
#cross site scripting attempt executing hidden Javascript
##SecFilterSelective THE_REQUEST "window\.execScript[\s]*\(" "msg:'cross-site1'"
 
#cross site scripting attempt to execute Javascript code
###SecFilterSelective THE_REQUEST "/(((URL|SRC|HREF|LOWSRC)[\s]*=)|(url[\s]*[\(]))[\s]*[\'\"]*javascript[\:]" "msg:'cross-site1'"
 
#cross site scripting HTML Image tag set to javascript attempt
#SecFilterSelective THE_REQUEST "img src=javascript" "msg:'cross-site1'"
 
#Fake image file shell attacvk
#SecFilterSelective HTTP_Content-Type "image/.*" "msg:'image shell 1'"
#SecFilterSelective POST_PAYLOAD "chr\(" "msg:'image shell2'"
 
#bogus graphics file
#SecFilterSelective HTTP_Content-Disposition "\.php"  "chain,msg:'bogus graphics'"
#SecFilterSelective HTTP_Content-Type "(image/gif|image/jpg|image/png|image/bmp)"
 
# Allow only letters, digits, underscore, and square brackets (for arrays)
# in variable names#
#SecFilterSelective ARGS_NAMES "!^[][a-zA-Z0-9_]+$"
 
#---------------------------------------------
# reject keywords that appear in POST or GET
#=============================================
SecFilterSignatureAction "nolog,auditlog,deny,severity:6,status:403"
 
SecFilterSelective REQUEST_URI  "^/.*/wp-comments-post\.php" "id:50200,msg:'WORDPRESS SPAM bad wp-comments-post location'"
 
<files wp-comments-post.php>
# fail for empty comment fields
SecFilterSelective "ARG_comment_post_ID|ARG_submit" "^$" "id:50300,msg:'WORDPRESS SPAM MISSING comment_post_ID'"
SecFilterSelective "ARG_comment_post_ID" "!^[0-9]{1,6}$" "id:50301,msg:'WORDPRESS SPAM BAD comment_post_ID'"
SecFilterSelective "HTTP_Cookie" "^$" "id:50302,msg:'WORDPRESS SPAM No cookie'"
 
##SecFilterSelective "comment_post_DI" "^$" "id:50310,msg:'WORDPRESS SPAM MISSING comment_post_DI'"
##SecFilterSelective "comment_post_DI" "!^[0-9]{1,2}$" "id:50311,msg:'WORDPRESS SPAM MISSING comment_post_DI'"
</files>
<pre>
 
<h2>MODSEC Continued.. Custom Anti-Spam (WordPress) I made</h2>
<pre>
SecFilterSignatureAction "nolog,noauditlog,deny,severity:6,redirect:http://www.askapache.com/feed/"
SecFilterSelective ARGS|THE_REQUEST "00bp\.com|360\.yahoo|987mb\.com|Ambien|American airline" "id:50010,msg:'SPAM 10'
SecFilterSelective ARGS|THE_REQUEST "Ativan|Caresoprodol|Darvocet|Ephedra|Ephedrine" "id:50011,msg:'SPAM 11'
SecFilterSelective ARGS|THE_REQUEST "Gambling|Lexapro|Tramadol|Venlafaxine" "id:50012,msg:'SPAM 12'
SecFilterSelective ARGS|THE_REQUEST "\[URL=|abgood|acura|acyclovir|adderall" "id:50013,msg:'SPAM 13'
SecFilterSelective ARGS|THE_REQUEST "adipex|alcohol|alprazolam|amateur|amrit" "id:50014,msg:'SPAM 14'
SecFilterSelective ARGS|THE_REQUEST "anal sex|analfinder|angelina jolie|asshole|axspace\.com" "id:50015,msg:'SPAM 15'
SecFilterSelective ARGS|THE_REQUEST "baccarat|bankrupt|bikini|biotic|black jack|blowjob" "id:50016,msg:'SPAM 16'
SecFilterSelective ARGS|THE_REQUEST "blackjack|blog\.360|brutality|buddhism|butalbital" "id:50017,msg:'SPAM 17'
SecFilterSelective ARGS|THE_REQUEST "cadillac|canalis|card credit|card stud|carisoprodol" "id:50018,msg:'SPAM 18'
SecFilterSelective ARGS|THE_REQUEST "carmen|cash advance|cash credit|casino|catch\.com" "id:50019,msg:'SPAM 19'
SecFilterSelective ARGS|THE_REQUEST "celebrex|celexa|cellulite|cheap|cheerleader" "id:50020,msg:'SPAM 20'
SecFilterSelective ARGS|THE_REQUEST "chevrolet|child abuse|cialis|cigarette|cipro" "id:50021,msg:'SPAM 21'
SecFilterSelective ARGS|THE_REQUEST "citroen|claritin|cleavage|clomid|codeine" "id:50022,msg:'SPAM 22'
SecFilterSelective ARGS|THE_REQUEST "consulting23|craps online|credit card|credit debt|crestor" "id:50023,msg:'SPAM 23'
SecFilterSelective ARGS|THE_REQUEST "dealership|debt free|desnudas|diazepam|dick" "id:50024,msg:'SPAM 24'
SecFilterSelective ARGS|THE_REQUEST "dildo|drugstore|earrings|endometrioma|endowment" "id:50025,msg:'SPAM 25'
SecFilterSelective ARGS|THE_REQUEST "erotic|estrogen|fioricet|francaise|freehost\.com" "id:50026,msg:'SPAM 26'
SecFilterSelective ARGS|THE_REQUEST "freehostia|freemb\.com|fuck|geocities\.com|hacking myspace" "id:50027,msg:'SPAM 27'
SecFilterSelective ARGS|THE_REQUEST "holdem|honda|hotels|hydrocodone|hypnotic" "id:50028,msg:'SPAM 28'
SecFilterSelective ARGS|THE_REQUEST "hyundai|implants|incest|instant approval|insurance" "id:50029,msg:'SPAM 29'
SecFilterSelective ARGS|THE_REQUEST "interracial|jaguar|jenny movie|johanson|kasino" "id:50030,msg:'SPAM 30'
SecFilterSelective ARGS|THE_REQUEST "lesbian|levitra|lipitor|loan|lolita" "id:50031,msg:'SPAM 31'
SecFilterSelective ARGS|THE_REQUEST "lorazepam|lorcet|lyrics|madamic|majorette" "id:50032,msg:'SPAM 32'
SecFilterSelective ARGS|THE_REQUEST "malaria|mastercar|masturbate|masturbation|maturewomen" "id:50033,msg:'SPAM 33'
SecFilterSelective ARGS|THE_REQUEST "mazda|medication|medicine|megsfree5\.com|mercedes" "id:50034,msg:'SPAM 34'
SecFilterSelective ARGS|THE_REQUEST "meridia|metformin|mitsubishi|mortgage|myspace profile" "id:50035,msg:'SPAM 35'
SecFilterSelective ARGS|THE_REQUEST "naked|neocool|nexium|nimire\.com|nissan" "id:50036,msg:'SPAM 36'
SecFilterSelective ARGS|THE_REQUEST "nokia|nude|nudism|nymph|open toe" "id:50037,msg:'SPAM 37'
SecFilterSelective ARGS|THE_REQUEST "oprodol|orgasm|oxycodone|oxycontin|packages" "id:50038,msg:'SPAM 38'
SecFilterSelective ARGS|THE_REQUEST "painrelief|pantyhose|paxil|payday|penis" "id:50039,msg:'SPAM 39'
SecFilterSelective ARGS|THE_REQUEST "percocet|pharmacy|phentermine|phetermine|phpbb_root" "id:50040,msg:'SPAM 40'
SecFilterSelective ARGS|THE_REQUEST "pictaboo|pictorial|pills|pissing|play craps" "id:50041,msg:'SPAM 41'
SecFilterSelective ARGS|THE_REQUEST "playgirl|pocker web|poker|pontiac|poquer" "id:50042,msg:'SPAM 42'
SecFilterSelective ARGS|THE_REQUEST "porn|pounder|prescription|preteen|prevacid" "id:50043,msg:'SPAM 43'
SecFilterSelective ARGS|THE_REQUEST "price1|prilosec|propecia|proza|prozac" "id:50044,msg:'SPAM 44'
SecFilterSelective ARGS|THE_REQUEST "puddled|pussy|refinance|rentals|replica" "id:50045,msg:'SPAM 45'
SecFilterSelective ARGS|THE_REQUEST "ringtones|roulette|screensaver|seduced|sexual" "id:50046,msg:'SPAM 46'
SecFilterSelective ARGS|THE_REQUEST "sexy|shemale|shiloh|singulair|site-host" "id:50047,msg:'SPAM 47'
SecFilterSelective ARGS|THE_REQUEST "slot machine|slot maschine|slots machine|solpip\.com|soma" "id:50048,msg:'SPAM 48'
SecFilterSelective ARGS|THE_REQUEST "sperm|starlets|supplier|suzuki|tadalafil" "id:50049,msg:'SPAM 49'
SecFilterSelective ARGS|THE_REQUEST "toyota|tylenol|ultram|valium|viagra" "id:50050,msg:'SPAM 50'
SecFilterSelective ARGS|THE_REQUEST "vigora|vioxx|wallpaper|warez|webcam" "id:50051,msg:'SPAM 51'
SecFilterSelective ARGS|THE_REQUEST "webpages\.com|wellbutrin|whitesluts|wholesale|whore" "id:50052,msg:'SPAM 52'
SecFilterSelective ARGS|THE_REQUEST "windshield|xanax|xenical|y lohan|yourgirls" "id:50053,msg:'SPAM 53'
SecFilterSelective ARGS|THE_REQUEST "youtube\.com|zantac|sex offenders|hotgay|Zoloft|celtic women" "id:50054,msg:'SPAM 54'
SecFilterSelective ARGS|THE_REQUEST "dollhouse|freehot|kardashian|oralsex" "id:50055,msg:'SPAM 55'
SecFilterSelective ARGS|THE_REQUEST "freeimghost" "id:50056,msg:'SPAM 56'

Unreleased AskApache Lightning code - caching plugin for WordPress

RewriteEngine On
RewriteBase /
 
RewriteCond %{REQUEST_URI} ^/(stats/|missing\.html|failed_auth\.html|test/).* [NC,OR]
RewriteCond %{ENV:REDIRECT_STATUS} =200
RewriteRule .* - [L]
 
RewriteCond %{HTTP_HOST} !=www.askapache.com
RewriteCond %{HTTP_HOST} !=z.askapache.com
RewriteRule .? http://www.askapache.com%{REQUEST_URI}%{QUERY_STRING} [R=301,L]
 
#RewriteCond %{HTTPS} =on
#RewriteCond %{THE_REQUEST} !^[A-Z]{3,9}\ /(wp-login.php|wp-admin)(.*)\ HTTP/ [NC]
#RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(.*)\ HTTP/ [NC]
#RewriteRule .* http://www.askapache.com/$1 [R=301,L]
 
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(.+)%20(.+)\ HTTP/ [NC]
RewriteRule .* http://www.askapache.com/%1-%2 [R=301,L]
 
RewriteCond %{THE_REQUEST} ^GET\ /valid-html/.*\ HTTP/ [NC]
RewriteCond %{HTTP_REFERER} ^https?://www.askapache.com(.+).*$ [NC]
RewriteRule .* http://validator.w3.org/check?uri=http://www.askapache.com%1;ss=1;outline=1;debug [R=307,L,NE]
 
RewriteCond %{THE_REQUEST} ^GET\ /valid-css/.*\ HTTP/ [NC]
RewriteRule .* http://jigsaw.w3.org/css-validator/validator?uri=z.askapache.com/z/c/apache-10.css [R=301,L]
 
RewriteCond %{THE_REQUEST} ^GET\ /search/.*\ HTTP/ [NC]
RewriteCond %{QUERY_STRING} ^s=(.+)$ [NC]
RewriteRule .* http://www.askapache.com/search/%1? [R=302,L]
 
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{DOCUMENT_ROOT}/X%{REQUEST_URI}index.html -f
RewriteRule ^(.*)$ /X%{REQUEST_URI}index.html [L]
 
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{DOCUMENT_ROOT}/X%{REQUEST_URI} -f
RewriteRule ^(.*)$ /X%{REQUEST_URI} [L]

Passing Parameters to CGI through HTTP Headers

This deserves a note.. this trick lets you bypass so many hosting environment restrictions it's not even funny... like you can run bash as your webserver instead of apache! (kinda...)

RewriteCond %{REQUEST_URI} ^/cgi-bin/(hash|java)\.cgi$ [NC]
RewriteCond %{HTTP:P3P} ^(([^:]+):(.+))$ [NC]
RewriteRule .* - [E=HTTP_JS:%{HTTP:P3P},E=HTTP_US:%2,E=HTTP_PA:%3]

Redirect to FeedBurner

Yes.. I was the first to do this (parse the real rewrites internally in wordpress for no bypassing possibilities)...

#RewriteCond %{REQUEST_URI} ^/feed/.*?$ [NC,OR]
#RewriteCond %{HTTP_REFERER} ^https?://www.askapache.com/wp-admin(.+).*$ [NC]
RewriteCond %{HTTP_USER_AGENT} FeedBurner [NC]
RewriteRule .* - [S=1]
 
RewriteCond %{REQUEST_URI} ^/(feed|rdf|rss|rss2|atom).* [NC,OR]
RewriteCond %{REQUEST_URI} ^/wp-(feed|rdf|rss|rss2|atom).* [NC,OR]
RewriteCond %{REQUEST_FILENAME} ^.*/(wp-atom|wp-feed|wp-rdf|wp-rss|wp-rss2)\.php$ [NC,OR]
RewriteCond %{REQUEST_FILENAME} ^.*/wp-includes/feed[^\.]*\.php$ [NC,OR]
RewriteCond %{QUERY_STRING} .*(feed|rdf|rss|rss2|atom).* [NC]
RewriteRule .* http://feeds.askapache.com/apache/htaccess? [R=302,L]

More Unreleased Caching Tests

# +ASKAPACHE CRAZYCACHE 2.3
#######################################################
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
# +ACACHE RULES
# +RULE
RewriteCond %{THE_REQUEST} ^(GET|HEAD)\ //?(.+)\.rdf\ HTTP/ [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-cache/%2.html/index.rdf -f
RewriteRule ^(.+)\.rdf$ /wp-cache/%2.html/index.rdf [L,S=3]
 
RewriteCond %{QUERY_STRING} !^.*cacheit.* [NC]
#RewriteCond %{HTTP_USER_AGENT} W3C_Validator [OR,NC]
#RewriteCond %{REMOTE_ADDR} = [OR]
 
RewriteCond %{REQUEST_METHOD} =POST [OR]
RewriteCond %{THE_REQUEST} ^$ [OR]
RewriteCond %{QUERY_STRING} nocache [OR]
RewriteCond %{REMOTE_ADDR} = [OR]
RewriteCond %{HTTP_COOKIE} ^.*wordpress_logged_in_.*$ [NC]
RewriteRule .+ - [S=2]
 
RewriteCond %{DOCUMENT_ROOT}/wp-cache%{REQUEST_URI} !-d
RewriteRule .+ - [S=1]
 
RewriteCond %{DOCUMENT_ROOT}/wp-cache%{REQUEST_URI}/index.html -f
RewriteRule .+ /wp-cache%{REQUEST_URI}/index.html [L]
# -RULE
# -ACACHE RULES
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
#######################################################
# -ASKAPACHE CRAZYCACHE 2.3
 
# +ASKAPACHE CRAZYCACHE 2.3
#######################################################
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
# +ACACHE RULES
# +RULE
FileETag None
AddOutputFilterByType DEFLATE text/html
 
AddType 'text/html; charset=UTF-8' .html
 
Header set P3P "policyref=\"http://www.askapache.com/w3c/p3p.xml\""
Header set X-Pingback "http://www.askapache.com/xmlrpc.php"
Header set Content-Language "en-US"
Header set Vary "Accept-Encoding,Accept"
 
<ifModule mod_expires.c>
ExpiresActive On
ExpiresDefault M7200
</ifModule>
# -RULE
# -ACACHE RULES
# - - - - - - - - - - - - - - - - - - - - - - - - - - -
#               __                          __
#   ____ ______/ /______ _____  ____ ______/ /_  ___
#  / __ `/ ___/ //_/ __ `/ __ \/ __ `/ ___/ __ \/ _ \
# / /_/ (__  ) ,< / /_/ / /_/ / /_/ / /__/ / / /  __/
# \__,_/____/_/|_|\__,_/ .___/\__,_/\___/_/ /_/\___/
#                     /_/
#######################################################
# -ASKAPACHE CRAZYCACHE 2.3
 
Options +IndexesOptions +FollowSymLinks
AddHandler application/x-httpd-php .php
 
RewriteEngine On
RewriteBase /
RewriteCond %{QUERY_STRING} !^tyy+$ [NC]
RewriteCond %{REMOTE_USER} ^(.+)$
RewriteRule ^(.*)$ $1/-%1 [R=302,L]
Options +FollowSymLinks
DirectoryIndex index.php
ErrorDocument 404 /cgi-bin/pro/index.php
 
AuthName "Protection"
AuthUserFile /home/askapache/sites/askapache.com/.htpasswda1
AuthGroupFile /dev/null
AuthType Basic
Require valid-user
Satisfy Any
 
<ifModule mod_security.c>
SecFilterEngine Off
</ifModule>
Options +ExecCGI -Indexes -Includes +FollowSymLinks
Order Deny,Allow
Deny from All
Allow from 208.113.134.190 64.111.114.111  env=REDIRECT_STATUS
 
#SetEnvIf Remote_Addr ^$ MODSEC_ENABLE=Off
#SetEnvIf Server_Addr ^$ MODSEC_ENABLE=Off
#SetEnvIf Remote_Addr ^({SERVER_ADDR}e)$ GOOD=$1
#SetEnvIf Server_Addr GOOD R

Default HTACCESS

#
# Directives controlling the display of server-generated directory listings.
#
# Required modules: mod_autoindex, mod_alias
#
# To see the listing of a directory, the Options directive for the
# directory must include "Indexes", and the directory must not contain
# a file matching those listed in the DirectoryIndex directive.
#
Options +Indexes +MultiViews -ExecCGI +FollowSymLinks
DirectoryIndex index.html
 
#
#
# IndexOptions: Controls the appearance of server-generated directory
# listings.
#
IndexOptions FancyIndexing IconHeight=22 IconWidth=20 IgnoreClient NameWidth=* DescriptionWidth=* ScanHTMLTitles SuppressLastModified XHTML FoldersFirst SuppressHTMLPreamble
 
#
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions.  These are only displayed for
# FancyIndexed directories.
#
 
AddIconByEncoding (CMP,http://z.askapache.com/i/s/compressed.gif) x-compress x-gzip
 
AddIconByType (IMG,http://z.askapache.com/i/s/image.gif) image/*
AddIconByType (SND,http://z.askapache.com/i/s/sound2.gif) audio/*
AddIconByType (TXT,http://z.askapache.com/i/s/text.gif) text/*
AddIconByType (VID,http://z.askapache.com/i/s/movie.gif) video/*
 
AddIcon http://z.askapache.com/i/s/hand.right.gif README
AddIcon http://z.askapache.com/i/s/folder.gif ^^DIRECTORY^^
AddIcon http://z.askapache.com/i/s/dir.png ^^DIRECTORY^^
AddIcon http://z.askapache.com/i/s/blank.gif ^^BLANKICON^^
AddDescription "100 Continue" 100* 100/index.html
AddDescription "101 Switching Protocols" 101* 101/index.html
AddDescription "102 Processing" 102* 102/index.html
AddDescription "200 OK" 200* 200/index.html
AddDescription "201 Created" 201* 201/index.html
AddDescription "202 Accepted" 202* 202/index.html
AddDescription "203 Non-Authoritative Information" 203* 203/index.html
AddDescription "204 No Content" 204* 204/index.html
AddDescription "205 Reset Content" 205* 205/index.html
AddDescription "206 Partial Content" 206* 206/index.html
AddDescription "207 Multi-Status" 207* 207/index.html
AddDescription "300 Multiple Choices" 300* 300/index.html
AddDescription "301 Moved Permanently" 301* 301/index.html
AddDescription "302 Found" 302* 302/index.html
AddDescription "303 See Other" 303* 303/index.html
AddDescription "304 Not Modified" 304* 304/index.html
AddDescription "305 Use Proxy" 305* 305/index.html
AddDescription "306 unused" 306* 306/index.html
AddDescription "307 Temporary Redirect" 307* 307/index.html
AddDescription "400 Bad Request" 400* 400/index.html
AddDescription "401 Authorization Required" 401* 401/index.html
AddDescription "402 Payment Required" 402* 402/index.html
AddDescription "403 Forbidden" 403* 403/index.html
AddDescription "404 Not Found" 404* 404/index.html
AddDescription "405 Method Not Allowed" 405* 405/index.html
AddDescription "406 Not Acceptable" 406* 406/index.html
AddDescription "407 Proxy Authentication Required" 407* 407/index.html
AddDescription "408 Request Time-out" 408* 408/index.html
AddDescription "409 Conflict" 409* 409/index.html
AddDescription "410 Gone" 410* 410/index.html
AddDescription "411 Length Required" 411* 411/index.html
AddDescription "412 Precondition Failed" 412* 412/index.html
AddDescription "413 Request Entity Too Large" 413* 413/index.html
AddDescription "414 Request-URI Too Large" 414* 414/index.html
AddDescription "415 Unsupported Media Type" 415* 415/index.html
AddDescription "416 Requested Range Not Satisfiable" 416* 416/index.html
AddDescription "417 Expectation Failed" 417* 417/index.html
AddDescription "418 unused" 418* 418/index.html
AddDescription "419 unused" 419* 419/index.html
AddDescription "420 unused" 420* 420/index.html
AddDescription "421 unused" 421* 421/index.html
AddDescription "422 Unprocessable Entity" 422* 422/index.html
AddDescription "423 Locked" 423* 423/index.html
AddDescription "424 Failed Dependency" 424* 424/index.html
AddDescription "425 No code" 425* 425/index.html
AddDescription "426 Upgrade Required" 426* 426/index.html
AddDescription "500 Internal Server Error" 500* 500/index.html
AddDescription "501 Method Not Implemented" 501* 501/index.html
AddDescription "502 Bad Gateway" 502* 502/index.html
AddDescription "503 Service Temporarily Unavailable" 503* 503/index.html
AddDescription "504 Gateway Time-out" 504* 504/index.html
AddDescription "505 HTTP Version Not Supported" 505* 505/index.html
AddDescription "506 Variant Also Negotiates" 506* 506/index.html
AddDescription "507 Insufficient Storage" 507* 507/index.html
AddDescription "508 unused" 508* 508/index.html
AddDescription "509 unused" 509* 509/index.html
AddDescription "510 Not Extended" 510* 510/index.html
AddDescription ".htaccess ErrorDocuments" *
 
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName /X/error/README.html
HeaderName /X/error/HEADER.html
 
# DefaultIcon is which icon to show for where none is explicitly set.
DefaultIcon http://z.askapache.com/i/s/generic.gif

Ok I'm done commenting..

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing.  Shell-style wildcarding is permitted.
#
IndexIgnore .??*  *_notes *~
RewriteEngine On
RewriteCond %{HTTPS} !=on [NC]
RewriteRule .* https://www.askapache.com%{REQUEST_URI}
RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},E=REMOTE_USER:%{HTTP:Authorization}]
 
#RewriteCond %{QUERY_STRING} openid.mode=authorize
#RewriteCond %{REQUEST_URI} ^/openid.*$ [NC]
#RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},E=REMOTE_USER:%{HTTP:Authorization}]
Options +FollowSymLinks
DirectoryIndex index.html
 
#SetEnvIfNoCase ^Cookie$ "(.*)" HTTP_MY_COOKIE=$1
#SetEnvIfNoCase Remote_Addr "(.*)" HTTP_MY_REMOTE_ADDR=$1
ExpiresActive Off
FileETag None
Header unset Connection
Header set Connection "close"
Header unset Last-Modified
Header unset ETag
Header unset Accept-Ranges
Header unset Vary
Header unset Content-Type
Header unset X-Pingback
Header unset P3P
#Header add RouterBits "%D %t"
#Header add Location "http://www.askapache.com/feed/"
#Header add Found "http://askapache.com/feed/"
#Header add Content-Location "http://www.askapache.com/feed/"
#Header add Refresh "http://www.askapache.com/feed/"
#Header set Hi "%{HTTP_MY_REMOTE_ADDR}e"
### Section 1: Global Environment
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#
#
# TZ: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
SetEnv TZ America/Indianapolis
 
#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#
SetEnv SERVER_ADMIN webmaster@askapache.com
 
#
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
#
# The Options directive is both complicated and important.  Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
#
Options  +FollowSymLinks -ExecCGI -Indexes -Includes -MultiViews
 
#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
DirectoryIndex index.html index.php /index.php
 
#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<filesMatch "^\.ht">
    Order allow,deny
    Deny from all
  Satisfy All
</filesMatch>
 
#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/html
 
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off
 
##############################################
#           HEADERS and CACHING              #
##############################################
Header unset Pragma
Header unset Last-Modified
FileETag None
 
Redirect 400 /e/400
Redirect 401 /e/401
Redirect 402 /e/402
Redirect 403 /e/403
Redirect 404 /e/404
Redirect 405 /e/405
Redirect 406 /e/406
Redirect 407 /e/407
Redirect 408 /e/408
Redirect 409 /e/409
Redirect 410 /e/410
Redirect 411 /e/411
Redirect 412 /e/412
Redirect 413 /e/413
Redirect 414 /e/414
Redirect 415 /e/415
Redirect 416 /e/416
Redirect 417 /e/417
Redirect 418 /e/418
Redirect 419 /e/419
Redirect 420 /e/420
Redirect 421 /e/421
Redirect 422 /e/422
Redirect 423 /e/423
Redirect 424 /e/424
Redirect 425 /e/425
Redirect 426 /e/426
Redirect 500 /e/500
Redirect 501 /e/501
Redirect 502 /e/502
Redirect 503 /e/503
Redirect 504 /e/504
Redirect 505 /e/505
Redirect 506 /e/506
Redirect 507 /e/507
Redirect 508 /e/508
Redirect 509 /e/509
Redirect 510 /e/510
 
#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
##############################################
#          PERMANENT REDIRECTS               #
##############################################
Redirect 301 /12-lessons-for-those-afraid-of-css.html http://www.askapache.com/css/12-lessons-for-those-afraid-of-css.html
Redirect 301 /2006/htaccess/htaccesselite-ultimate-htaccess-article.html http://www.askapache.com/htaccess/apache-htaccess.html
Redirect 301 /2007/phpbb/sending-post-form-data-with-php-curl.html http://www.askapache.com/htaccess/sending-post-form-data-with-php-curl.html
Redirect 301 /2007/webmaster/custom-phpini-with-fastcgi-on-dreamhost.html http://www.askapache.com/dreamhost/custom-phpini-with-fastcgi-on-dreamhost.html
Redirect 301 /2007/webmaster/custom-phpini-with-fastcgi-on-dreamhost.html http://www.askapache.com/dreamhost/custom-phpini-with-fastcgi-on-dreamhost.html
Redirect 301 /2007/webmaster/php-and-ajax-shell-console.html http://www.askapache.com/tools/php-and-ajax-shell-console.html
Redirect 301 /27-request-methods-for-use-with-apache-and-rewritecond-and-htaccess.html http://www.askapache.com/htaccess/27-request-methods-for-use-with-apache-and-rewritecond-and-htaccess.html
Redirect 301 /404-google-wordpress-plugin.html http://www.askapache.com/seo/404-google-wordpress-plugin.html
Redirect 301 /503-service-temporarily-unavailable.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /Overview-about.rdf http://www.askapache.com/askapache-home.rdf
Redirect 301 /abbr-acronym.html http://www.askapache.com/xhtml/abbr-acronym.html
Redirect 301 /adsense-robots.html http://www.askapache.com/google/adsense-robots.html
Redirect 301 /alexa-toolbar-firefox.html http://www.askapache.com/tools/alexa-toolbar-firefox.html
Redirect 301 /allowing-access-from-1-static-ip-and-deny-the-rest.html http://www.askapache.com/htaccess/apache-htaccess.html
Redirect 301 /anti-virus-spyware-rootkit.html http://www.askapache.com/security/anti-virus-spyware-rootkit.html
Redirect 301 /apache-ssl-in-htaccess-examples.html http://www.askapache.com/htaccess/apache-ssl-in-htaccess-examples.html
Redirect 301 /awk-tutorial.html http://www.askapache.com/awk/awk-tutorial.html
Redirect 301 /best-adsense-optimization.html http://www.askapache.com/wordpress/best-adsense-optimization.html
Redirect 301 /commonly-used-htaccess-code-examples.html http://www.askapache.com/htaccess/commonly-used-htaccess-code-examples.html
Redirect 301 /css-background-image-sprite.html http://www.askapache.com/css/css-background-image-sprite.html
Redirect 301 /css-browser-screenshots.html http://www.askapache.com/tools/css-browser-screenshots.html
Redirect 301 /css-class-example.html http://www.askapache.com/css/css-class-example.html
Redirect 301 /curl-multi-downloads.html http://www.askapache.com/php/curl-multi-downloads.html
Redirect 301 /custom-boot-menu-in-windows-xp.html http://www.askapache.com/windows/custom-boot-menu-in-windows-xp.html
Redirect 301 /donate http://www.dreamhost.com/donate.cgi?id=8261
Redirect 301 /donate/ http://www.dreamhost.com/donate.cgi?id=8261
Redirect 301 /htaccess.txt http://z.askapache.com/p/htaccess.txt
Redirect 301 /htaccess/404-errorpages.html http://www.askapache.com/seo/google-ajax-search-seo-tips.html
Redirect 301 /htaccess/feedsmith http://www.askapache.com/htaccess/feedsmith-htaccess.html
Redirect 301 /htaccess/http-status-codes.html http://www.askapache.com/htaccess/apache-status-code-headers-errordocument.html
Redirect 301 /htaccess/instruct-search-engines-to-come-back-to-site-after-you-finish-working-on-it.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /htaccess/speed-up-the-apache-web-server-with-configuration-hacks.html http://www.askapache.com/htaccess/apache-web-server-speed-configuration-hacks.html
Redirect 301 /instruct-search-engines-to-come-back-to-site-after-you-finish-working-on-it.html http://www.askapache.com/htaccess/503-service-temporarily-unavailable.html
Redirect 301 /security/bypassing-vlan.html http://www.askapache.com/security/hacking-vlan-switched-networks.html
Redirect 301 /security/bypassing-vlanbypassing-vlan.html http://www.askapache.com/security/hacking-vlan-switched-networks.html
Redirect 301 /security/rigging-the-dreamhost-site-of-the-month-contest.html http://www.askapache.com/dreamhost/rigging-the-dreamhost-site-of-the-month-contest.html
Redirect 301 /seo/tailrankcom-robot.html http://www.askapache.com/seo/tailrank-robot.html
Redirect 301 /webmaster/caching-tutorial-for-webmasters.html http://www.askapache.com/htaccess/caching-tutorial-for-webmasters.html
Redirect 301 /webmaster/lft-traceroute-tool.html http://www.askapache.com/tools/lft-traceroute-tool.html
 
##############################################
#          PERMANENT REDIRECTMATCH           #
##############################################
#RedirectMatch 301 ^/&(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/&amp(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/([^/]+)//$ http://www.askapache.com/$1/
RedirectMatch 301 ^/(.+)/htaccesselite-ultimate-htaccess-article.html(.*) http://www.askapache.com/htaccess/apache-htaccess.html
RedirectMatch 301 ^/(.+)\.html/([a-z][a-z])/$ http://www.askapache.com/$1.html
RedirectMatch 301 ^/([\(]+)(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/([^9]*)9O1X.3y(.*)/(.*)$ http://www.askapache.com/$2
RedirectMatch 301 ^/.3y(.*)$ http://www.askapache.com/
RedirectMatch 301 ^/200([0-9])/([0-9])(.*)$ http://www.askapache.com/top-100/
RedirectMatch 301 ^/200([0-9])/([^01])(.*)$ http://www.askapache.com/$2$3
RedirectMatch 301 ^/about/glossary(.*)$ http://www.askapache.com/glossary$1
RedirectMatch 301 ^/apache-speed(.*)$ http://www.askapache.com/htaccess/apache-speed$1
RedirectMatch 301 ^/category/(.+)$ http://www.askapache.com/$1
RedirectMatch 301 ^/docs/(.*)$ http://askapache.info/$1
RedirectMatch 301 ^/htaccess/feedsmith-htaccess(.*) http://www.askapache.com/htaccess/redirecting-wordpress-feeds-to-feedburner.html
RedirectMatch 301 ^/robots-txt(.*)$ http://www.askapache.com/robots.txt
#RedirectMatch 301 ^/wp-content/uploads/(.*)$ http://z.askapache.com/uploads/$1
RedirectMatch 301 ^/z/(.+)$ http://z.askapache.com/$1
RedirectMatch 301 ^/(z|t|i|j|c|p)/(.*)$ http://z.askapache.com/$1/$2
RedirectMatch 301 ^/hosting/?$ http://www.askapache.com/hosting/
 
##############################################
#          TEMPORARY REDIRECTMATCH           #
##############################################
RedirectMatch 307 ^/getflash/?$ http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash
RedirectMatch 307 ^/dream/?$ http://www.askapache.com/dreamhost/
RedirectMatch 307 ^/(cse|apachecse|apachecsetest|apachesearch)/?$ http://www.google.com/coop/cse?cx=002660089121042511758%3Akk7rwc2gx0i
 
#
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of charset names and their respective RFCs.
#
AddDefaultCharset UTF-8
 
#
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#
#
AddType 'application/rdf+xml; charset=UTF-8' .rdf
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml.gz
AddType 'text/html; charset=UTF-8' .html
AddType 'text/html; charset=UTF-8' .html.gz
AddType application/octet-stream .rar .chm .bz2 .tgz .msi .pdf .exe
AddType application/vnd.ms-excel .csv
AddType application/x-httpd-php-source .phps
AddType application/x-pilot .prc .pdb
AddType application/x-shockwave-flash .swf
AddType application/xrds+xml .xrdf
AddType text/plain .ini .sh .bsh .bash .awk .nawk .gawk .csh .var .c .in .h .asc .md5 .sha .sha1
AddType video/x-flv .flv
 
#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
 
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler php-cgi .php
 
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
Action php-cgi /cgi-bin/php.cgi
 
#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
#100 Continue
#101 Switching Protocols
#102 Processing
#200 OK
#201 Created
#202 Accepted
#203 Non-Authoritative Information
#204 No Content
#205 Reset Content
#206 Partial Content
#207 Multi-Status
#300 Multiple Choices
#301 Moved Permanently
#302 Found
#303 See Other
#304 Not Modified
#305 Use Proxy
#306 unused
#307 Temporary Redirect
#400 Bad Request
#401 Authorization Required
#402 Payment Required
#403 Forbidden
#404 Not Found
#405 Method Not Allowed
#406 Not Acceptable
#407 Proxy Authentication Required
#408 Request Time-out
#409 Conflict
#410 Gone
#411 Length Required
#412 Precondition Failed
#413 Request Entity Too Large
#414 Request-URI Too Large
#415 Unsupported Media Type
#416 Requested Range Not Satisfiable
#417 Expectation Failed
#418 unused
#419 unused
#420 unused
#421 unused
#422 Unprocessable Entity
#423 Locked
#424 Failed Dependency
#425 No code
#426 Upgrade Required
#500 Internal Server Error
#501 Method Not Implemented
#502 Bad Gateway
#503 Service Temporarily Unavailable
#504 Gateway Time-out
#505 HTTP Version Not Supported
#506 Variant Also Negotiates
#507 Insufficient Storage
#508 unused
#509 unused
#510 Not Extended
 
#ErrorDocument 100 /X/err/1/HTTP_CONTINUE.html
#ErrorDocument 101 /X/err/1/HTTP_SWITCHING_PROTOCOLS.html
#ErrorDocument 102 /X/err/1/HTTP_PROCESSING.html
 
#ErrorDocument 200 /X/err/2/HTTP_OK.html
#ErrorDocument 201 /X/err/2/HTTP_CREATED.html
#ErrorDocument 202 /X/err/2/HTTP_ACCEPTED.html
#ErrorDocument 203 /X/err/2/HTTP_NON_AUTHORITATIVE.html
#ErrorDocument 204 /X/err/2/HTTP_NO_CONTENT.html
#ErrorDocument 205 /X/err/2/HTTP_RESET_CONTENT.html
#ErrorDocument 206 /X/err/2/HTTP_PARTIAL_CONTENT.html
#ErrorDocument 207 /X/err/2/HTTP_MULTI_STATUS.html
 
#ErrorDocument 300 /X/err/HTTP_MULTIPLE_CHOICES.html
#ErrorDocument 301 /X/err/HTTP_MOVED_PERMANENTLY.html
#ErrorDocument 302 /X/err/HTTP_MOVED_TEMPORARILY.html
#ErrorDocument 303 /X/err/HTTP_SEE_OTHER.html
#ErrorDocument 304 /X/err/HTTP_NOT_MODIFIED.html
#ErrorDocument 305 /X/err/HTTP_USE_PROXY.html
#ErrorDocument 307 /X/err/HTTP_TEMPORARY_REDIRECT.html
#ErrorDocument 404 /X/err/HTTP_NOT_FOUND.html
 
ErrorDocument 400 /X/err/4/HTTP_BAD_REQUEST.html
ErrorDocument 401 /X/err/4/HTTP_UNAUTHORIZED.html
ErrorDocument 402 /X/err/4/HTTP_PAYMENT_REQUIRED.html
ErrorDocument 403 /X/err/4/HTTP_FORBIDDEN.html
ErrorDocument 405 /X/err/4/HTTP_METHOD_NOT_ALLOWED.html
ErrorDocument 406 /X/err/4/HTTP_NOT_ACCEPTABLE.html
ErrorDocument 407 /X/err/4/HTTP_PROXY_AUTHENTICATION_REQUIRED.html
ErrorDocument 408 /X/err/4/HTTP_REQUEST_TIME_OUT.html
ErrorDocument 409 /X/err/4/HTTP_CONFLICT.html
ErrorDocument 410 /X/err/4/HTTP_GONE.html
ErrorDocument 411 /X/err/4/HTTP_LENGTH_REQUIRED.html
ErrorDocument 412 /X/err/4/HTTP_PRECONDITION_FAILED.html
ErrorDocument 413 /X/err/4/HTTP_REQUEST_ENTITY_TOO_LARGE.html
ErrorDocument 414 /X/err/4/HTTP_REQUEST_URI_TOO_LARGE.html
ErrorDocument 415 /X/err/4/TTP_UNSUPPORTED_MEDIA_TYPE.html
ErrorDocument 416 /X/err/4/HTTP_RANGE_NOT_SATISFIABLE.html
ErrorDocument 417 /X/err/4/HTTP_EXPECTATION_FAILED.html
ErrorDocument 422 /X/err/4/HTTP_UNPROCESSABLE_ENTITY.html
ErrorDocument 423 /X/err/4/HTTP_LOCKED.html
ErrorDocument 424 /X/err/4/HTTP_FAILED_DEPENDENCY.html
ErrorDocument 426 /X/err/4/HTTP_UPGRADE_REQUIRED.html
 
ErrorDocument 500 /X/err/5/HTTP_INTERNAL_SERVER_ERROR.html
ErrorDocument 501 /X/err/5/HTTP_NOT_IMPLEMENTED.html
ErrorDocument 502 /X/err/5/HTTP_BAD_GATEWAY.html
ErrorDocument 503 /X/err/5/HTTP_SERVICE_UNAVAILABLE.html
ErrorDocument 504 /X/err/5/HTTP_GATEWAY_TIME_OUT.html
ErrorDocument 505 /X/err/5/HTTP_VERSION_NOT_SUPPORTED.html
ErrorDocument 506 /X/err/5/HTTP_VARIANT_ALSO_VARIES.html
ErrorDocument 507 /X/err/5/HTTP_INSUFFICIENT_STORAGE.html
ErrorDocument 510 /X/err/5/HTTP_NOT_EXTENDED.html
ErrorDocument 404 /index.php?error=404
 
# 1 YEAR
<filesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$">
Header unset P3P
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
</filesMatch>
 
# 2 HOURS
<filesMatch "\.(html|htm|xml|txt|xsl)$">
<ifModule mod_expires.c>
ExpiresActive On
ExpiresDefault A3600
</ifModule>
</filesMatch>
 
RewriteEngine On
RewriteBase /
 
RewriteCond %{ENV:REDIRECT_STATUS} =200
RewriteRule .* - [L]
 
RewriteCond %{REQUEST_METHOD} !^(GET|HEAD) [OR]
#RewriteCond %{QUERY_STRING} !^$ [OR]
RewriteCond %{HTTP_COOKIE} ^.*(comment_author_|wordpress|wp-postpass_).*$ [NC]
RewriteRule ^(.*)$ - [S=6]
 
RewriteCond %{HTTP_USER_AGENT} .*W3C_Validator.* [NC]
RewriteCond %{HTTP:Accept-Encoding} gzip [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.xhtml.gz -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.xhtml.gz [L,S=5]
 
RewriteCond %{HTTP:Accept} application/xhtml\+xml [NC]
RewriteCond %{HTTP:Accept-Encoding} gzip [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.xhtml.gz -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.xhtml.gz [L,S=4]
 
RewriteCond %{HTTP:Accept-Encoding} gzip [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.html.gz -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.html.gz [L,S=3]
 
RewriteCond %{HTTP_USER_AGENT} .*W3C_Validator.* [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.xhtml -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.xhtml [L,S=2]
 
RewriteCond %{HTTP:Accept} application/xhtml\+xml [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.xhtml -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.xhtml [L,S=1]
 
RewriteCond %{DOCUMENT_ROOT}/wp-content/cache/aa/$1/index.html -f
RewriteRule ^(.*)$ /wp-content/cache/aa/$1/index.html [L]
 
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(.+)\.rdf\ HTTP/ [NC]
RewriteCond %{DOCUMENT_ROOT}/wp-content/rdf/%1.html/index.rdf -f
RewriteRule ^(.*)$ /wp-content/rdf/%1.html/index.rdf [L,S=1]
 
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(error|w3c|openid)(/?.*)\ HTTP/ [NC]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ /X/%1%2 [L]
 
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(y_key_bf61afd498f7623a\.html|google3bb7b7e1032ad0d4\.html|yadis\.xrdf|askapache-home\.rdf|os-description\.xml|labels\.rdf|gnu-fdl\.txt|wlmmanifest\.xml|robots\.txt)\ HTTP/ [NC]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule .* /X/%1 [L]
 
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /X(.*)\ HTTP/ [NC]
RewriteRule .* - [F]
 
RewriteRule ^osq?(.*)$ /wp-content/plugins/wp-opensearch.php?$1 [QSA,L]
 
#RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /wp-login(.+)\ HTTP/ [NC]
#RewriteRule .+ https://www.askapache.com/wp-login%1 [R,L]
 
RewriteCond %{REQUEST_URI} ^/cgi-bin/(hash|java)\.cgi$ [NC]
RewriteCond %{HTTP:P3P} ^(([^:]+):(.+))$ [NC]
RewriteRule .* - [E=HTTP_JS:%{HTTP:P3P},E=HTTP_US:%2,E=HTTP_PA:%3]
 
RewriteCond %{HTTP_ACCEPT} application/xrds\+xml
RewriteCond %{HTTP_ACCEPT} !application/xrds\+xml\s*;\s*q\s*=\s*0(\.0{1,3})?\s*(,|$)
RewriteRule ^$ http://www.askapache.com/yadis.xrdf [R,L]
 
RewriteCond %{HTTP_USER_AGENT} !^(FeedBurner|FeedValidator|talkr.com).* [NC]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(feed|rdf|rss|rss2|atom)/?.*\ HTTP/ [NC]
#RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /(feed|rdf|rss|rss2|atom|wp-atom|wp-feed|wp-rdf|wp-rss|wp-rss2).*\ HTTP/ [NC]
RewriteRule .* http://feeds.askapache.com/apache/htaccess? [R=302,L]
 
#RewriteCond %{REMOTE_ADDR} ^$
#RewriteCond %{REQUEST_FILENAME} !-f
#RewriteCond %{REQUEST_FILENAME} !-d
#RewriteRule ^(.+)\.phps$ /cgi-bin/phps.php?file=$1.php [L,NC]

Actual Htaccess Files from My Server originally appeared on AskApache.com

Web Developers sometimes use file.ext?v=137 as a version control system so they can force visitors to use an updated file. This is so terrible. Instead link to apache-003.css and set it to be cached forever. When you change the file you just change the links to apache-004.css.

Raw Speed Benefit

This eliminates millions of bandwidth and resource robbing 304 If-Modified-Since requests.

Renaming links vs. Renaming files

On the server my files are named apache.css and apache.js, but in the xhtml I point to them using the names apache-113.css and apache-113.js, after I change the file I just add 1 to the number, and the new file is cached. They are internally redirected to apache.css and apache.js (invisible to the user) The concept is similar to a "shortcut" in windows or a symlink in BSD. The trick is that I never actually rename the files on the server. I just rename them in the html. That means apache-135.css is served from the file apache.css but the browser/cache only see and know about apache-135.css.

XHTML

NOTE: You can do your own investigating of this sites source code and HTTP headers to see this whole system in action

<link href="http://static.askapache.com/z/c/apache-0031.css" rel="stylesheet" type="text/css" />
<script src="http://static.askapache.com/z/j/apache-0031.js" type="text/javascript"></script>

mod_rewrite code for htaccess or httpd.conf

Updated: 10/20/2008

RewriteEngine On
RewriteBase /
RewriteCond %{THE_REQUEST} ^(GET|HEAD)\ /z/([a-z]+)/(.+)-([0-9]+)\.(js|css).*\ HTTP/ [NC]
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule .+ /z/%2/%3.%5 [NC,L]

Alternate mod_rewrite code

RewriteEngine On
RewriteBase /
RewriteRule ^([cij]+)(/?[a-z]*)/([a-z]+)-([0-9]+)\.([a-z]+)$ /$1$2/$3.$5 [L]

Ideal Caching Scheme

Ok so you want the xhtml to be the only file that isn't cached without being validated, its simple to setup your own caching scheme.

Bad Cache information for a file with the ?v=foo hack

This object will be fresh for 1 week. It can be validated with Last-Modified. This object requests that a Cookie be set; this makes it and other pages affected automatically stale; clients must check them upon every request. Because it contains a query ('?') in the URL, many caches will not keep this object.

mod_rewrite Fix for Caching Updated Files originally appeared on AskApache.com

So my blog as been rather quiet for almost a year now, and very few updates if any have been released for my Password Protection PLugin, my Google 404 Plugin, and definately not for my AskApache CrazyCache plugin, which I will be releasing last... So for all of you who've helped me out by sending me suggestions and notifying me of errors and sticking with it... Just wanted to say sorry about that, and thanks for all the great ideas.. Well, I've been sticking with it as well believe it our not. I manage to get free days once in a while, and then its time to jam.

I've used just about every CMS/Blog/Forum/Trac/Gallery/etc) and really didn't like a lot of the way they coded... I could use php but I didn't KNOW php.. so I've had to learn php also, and it was tough to learn the advanced class usage and all the other language specific (but similar) constructs for php. It was especially difficult (but fun and challenging) to program so as to be compatible with php4 and php5 (Such is WordPress). But I kept at it, and soon you can decide for yourself what to make of it.

I can code in plenty of languages (bash, lua, windows .bat and vbs, ocaml, big fan of all things shell) and can work my way through C and even sorta somewhat with assembly. Assembly is the hardest, by far, I'm into easy and powerful languages like Python, Javascript, perl, php, ruby, and CGI. I've used PHP for a long time to do various things, but never to build software projects like this. Once I noticed WordPress's core .php files and the excellent programming I wanted to try and learn hot to do it. The WordPress code is some of the best I've seen. It appears the way they built it was planned, and not just dreamt up while typing that I can't help but do. Every time I read through the core code I learn a new trick or very nice way to do something. Those guys are really good, and I think WordPress is going to dominate for a long long time.

The Strategy

The Password Protection (passpro) plugin has a lot of complex stuff going on, especially for a newbie to PHP and WordPress like me, so after refactoring the whole thing at least 5 times I decided to modify my approach, and wrote the AskApache Google 404 Plugin as a way to practice on a simpler piece of code, while at the same time providing a plugin of value. Eventually I stopped thinking I could just code the whole thing in one sit-down with a stream-of-consciousness, and had to instead modularize the code and focus in on each part before moving to the next (I go without a plan because its fun, just not the most productive, but again, I'm not a programmer in the scientific sense.).

So I decided I had to really learn how WordPress Plugins work, filters, hooks, actions, and basically comfortability at reverse-engineering code, (Im a beginner for the last time), and so with the upcoming release of the AskApache Google 404 Plugin I have succeeded in making an incredibly stable plugin. That way I only have to worry about what the aapasspro plugin is doing, instead of trying to fit it into a framework.

AskApache Google 404 Upgrade

I think its rather unusual to develop a nice plugin like this 404 handler merely for the purpose of improving upon another plugin, but hey it worked. As of 08/03/2009 14:06PM EST I have about 1 hour left of finishing touches to release this upgrade. But as you cantell by my badly edited posts, I don't have a lot of time to myself. An hour here and there is about it. So it could be up to 2 weeks before I actually have the time to commit the release to the repo. On a sidenote, have you checked out Windows 7 News? I've been contracted to do some technical work for them and thought they had an excellent site.

But keep in mind, the 404 PLugin is just where I practice for the passpro plugin, which truly does have features that no other software like it has ever had. I understand the technology behind this plugin, and know it would really have a great impact on improving the Web (esp. WordPress) for all of us, I've just had to learn how to make it.

AskApache Password Protection

Probably still a couple weeks away, this plugin is the ultimate culmination of apache hackers dreams, at least those on shared servers (who may be interested in learning how to bypass security of said servers).. So this is something I have much too fun with doing what I like to do.. network/protocol-level security. I've examined the source code for many software packages that I use or have used to audit a server's security, and this simple php plugin in most instances can enumerate with accuraccy most of the server's setup in about a minute. The catch (and the file permission problems I had to find a workaround too) is that this software is launched on the server, not remotely against the server.

Some of the software I examined was whiskers, nessus, nmap, hping, mozilla source, wireshark, ncftp, netcat, etc.. The closest comparison to the socket-level class I've hacked together to those is wireshark. Except that wireshark only interprets (captures) the data passing over the wire, while this class does that and in fact sends and receives the data like netcat or nmap. Its really more similar to metasploit, and can easily be used to send hex, binary, ascii, or any type of payload to the remote or local host.

The Upgrades Begin

Well I started working on them a long time ago. Both the Password Protection plugin and the Google 404 plugin needed serious work. And I finally have it all figured out. Essentially I would work on one and finish an upgrade, but I just wasn't happy with it and I wold start all over again, refactoring the code. So as I put the finishing touches on those 2 plugins keep an eye out. They are major upgrades. I was able to meet all the goals I had for them, and came up with a lot of more improvements during the process.One of the main things I needed was a socket-level class to perform all kinds of checks and tests on. I need this also for my crazy cache plugin, which my blog is currently using , and I have a 2 more really nice pplugins I use that also needed access to a network class. I wrote about what I was doing with fsockopen, and I've been improving on that example ever since. I use this class to do some really powerful and exciting stuff, but you'll see it soon enough. As an indication of 'getting it right' for the Password Protection plugin, the plugin will now work on Windows, Apache, IIS, Lighthttpd, and will even work running on a blackberry web server. So now everyone using wordpress can at least get some security()

Many of the the other improvements focus on using the fsockopen class and .htaccess tricks to basically enumerate and discover all the different capabilities of your particular server; That way you can learn about all the features and security that are possible for your specific server, and the securty modules wi8ll be geared for that as well. FINALLY this plugin is going to be stable, and I just cant wait to see how people react when they learn all great capability their Apache-based Server has that they didn't have a clue about. Its amazing in that sense, and hackers will love theh way it works.. but your server admins will love it even more because its entirely 100% focused on helping you to set your site up (if you have Apache) to keep spammers out, to keep virii-serving robots and their log-hogging exploit requests and CPU/Mem robiing 404 errors off of your servers for real. This will have a noticeable affect to whoever is running the server. As you can tell.. I am pumped!

Apache can only be influenced by the main server configs and by .htaccess files. Not by php, not by perl, and the main configs are almost never accessible to the masses. But .htaccess files are. And many hosting providers allow and enable .htaccess files, a configuration file for your web server. The advanced features and capabilities of Apache were out of reach for most of us, it just wasn't possible to enumerate or access, and most hosting providers are infamous for their lack of .htaccess (customer) support. This plugin goes around those problems to give the power back to the people.

Here are a few examples of the capabilities of this plugin, some of which I believe no other software can do.. (Open source free to copy!).

1. Current Version of Apache (Down to the API Version)
2. List of ALL Modules currently enabled by Apache (Such as Mod_Rewrite)
3. List of ALL Directives enabled by EACH enabled Module.
4. Enumerate .htaccess Overrides, Context Permissions
5. Test for any builtin Handlers (like the status handler screenshot)
6. Configure SSI (http://www.askapache.com/htaccess/advanced-htaccess-ssi.html#htaccess-ssi-security)

March 1, 2009
I would focus on the method that WordPress uses. The code they have now (2.8 bleeding-edge) still isn't where it needs to be, but this is some difficult stuff and they have a brilliant start, it'll work.. just a question of when.

The main issue with the password protection plugin working for some people and not others is due to file permission configurations. The plugin attempts to write/modify files in your blog's root directory.

November 05, 2008
To make a long story short, I downloaded each major release of the apache httpd source code starting at version 1.3.0 and finishing with version 2.2.11, I then compiled each version and built a HTTPD from source for all these apache versions.

• 1.3.0
• 1.3.1
• 1.3.11
• 1.3.12
• 1.3.14
• 1.3.17
• 1.3.19
• 1.3.2
• 1.3.20
• 1.3.22
• 1.3.23
• 1.3.24
• 1.3.27
• 1.3.28

• 1.3.29
• 1.3.3
• 1.3.31
• 1.3.32
• 1.3.33
• 1.3.34
• 1.3.35
• 1.3.36
• 1.3.37
• 1.3.39
• 1.3.4
• 1.3.41
• 1.3.6
• 1.3.9

• 2.0.35
• 2.0.36
• 2.0.39
• 2.0.40
• 2.0.42
• 2.0.43
• 2.0.44
• 2.0.45
• 2.0.46
• 2.0.47
• 2.0.48
• 2.0.49
• 2.0.50
• 2.0.51

• 2.0.52
• 2.0.53
• 2.0.54
• 2.0.55
• 2.0.58
• 2.0.59
• 2.0.61
• 2.0.63
• 2.1.3-beta
• 2.1.6-alpha
• 2.1.7-beta
• 2.1.8-beta
• 2.1.9-beta

• 2.2.0
• 2.2.10
• 2.2.2
• 2.2.3
• 2.2.4
• 2.2.6
• 2.2.8
• 2.2.9
• 2.2.10
• 2.2.11

Then I went through each version and determined the compatible modules for that version, and I'm pretty confident that I was also able to find each and every directive allowed by the compatible modules for that version (including core directives). See .htaccess directive list. Basically I can now test a server using a variety of methods and determine almost 100% accurately what version of Apache (down to the API) is running, what modules (and versions) are enabled, and each and every directive that is allowed or disallowed for that version. So this is so awesome because now we can enable all sorts of additional security features.

Htaccess enabled Modules

Here are most of the modules that come with Apache. Each one can have new commands that can be used in .htaccess file scopes.

mod_actions, mod_alias, mod_asis, mod_auth_basic, mod_auth_digest, mod_authn_anon, mod_authn_dbd, mod_authn_dbm, mod_authn_default, mod_authn_file, mod_authz_dbm, mod_authz_default, mod_authz_groupfile, mod_authz_host, mod_authz_owner, mod_authz_user, mod_autoindex, mod_cache, mod_cern_meta, mod_cgi, mod_dav, mod_dav_fs, mod_dbd, mod_deflate, mod_dir, mod_disk_cache, mod_dumpio, mod_env, mod_expires, mod_ext_filter, mod_file_cache, mod_filter, mod_headers, mod_ident, mod_imagemap, mod_include, mod_info, mod_log_config, mod_log_forensic, mod_logio, mod_mem_cache, mod_mime, mod_mime_magic, mod_negotiation, mod_proxy, mod_proxy_ajp, mod_proxy_balancer, mod_proxy_connect, mod_proxy_ftp, mod_proxy_http, mod_rewrite, mod_setenvif, mod_speling, mod_ssl, mod_status, mod_substitute, mod_unique_id, mod_userdir, mod_usertrack, mod_version, mod_vhost_alias

Debugging HTTP protocol

Check this out! I'm particularly happy about this feature, which outputs an exact trace of any requests made by the plugin (such as during the testing phase) by saving the actual raw data sent out on the wire using fsockopen, RX and TX. This is useful for a number of reasons, viewing your headers, finding Redirect Loops, testing RewriteRules, and following the request hop-by-hop for debugging. The below example shows 2 requests for 2 URIs. The first URI is protected using Digest Authentication, the 2nd shows Basic.

 ______________
|  RAW TRACE   |
==================================================================================================================================
GET /htaccess/index.txt?testing=query HTTP/1.1
Host: www.askapache.com
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1) AA_PassPro/1.9 (http://www.askapache.com/)
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us
Accept-Encoding: gzip, deflate
Connection: close
Referer: http://www.askapache.com/
 
HTTP/1.1 401 Authorization Required
Date: Wed, 22 Jul 2009 06:29:58 GMT
Server: Apache
WWW-Authenticate: Digest realm="do or die", nonce="03328f3ec7c7b", algorithm=MD5, domain="/", qop="auth"
Accept-Ranges: bytes
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 882
Connection: close
Content-Type: text/html; charset=UTF-8
 
GET /htaccess/index.txt?testing=query HTTP/1.1
Host: www.askapache.com
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1) AA_PassPro/1.9 (http://www.askapache.com/)
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us
Accept-Encoding: gzip, deflate
Connection: close
Referer: http://www.askapache.com/
Authorization: Digest username="test",realm="do or die",nonce="03328f3ec7c7b",uri="/htaccess/index.txt?testing=query",
cnonce="82d057852a9dc497",nc=00000001,algorithm=MD5,response="9d476e9ea3",qop="auth"
 
HTTP/1.1 200 OK
Date: Wed, 22 Jul 2009 06:29:58 GMT
Server: Apache
Authentication-Info: rspauth="9051b01ee26dd62b3e2b40dada694f45", cnonce="82d057852a9dc497", nc=00000001, qop=auth
Last-Modified: Tue, 21 Jul 2009 23:56:00 GMT
Accept-Ranges: bytes
Cache-Control: max-age=3600
Expires: Wed, 22 Jul 2009 07:29:58 GMT
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 27
Connection: close
Content-Type: text/plain; charset=UTF-8
```````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````
 
 ______________
|  RAW TRACE   |
==================================================================================================================================
GET /htaccess/po.txt?testing=query HTTP/1.1
Host: www.askapache.com
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1) AA_PassPro/1.9 (http://www.askapache.com/)
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us
Accept-Encoding: gzip, deflate
Connection: close
Referer: http://www.askapache.com/
 
HTTP/1.1 401 Authorization Required
Date: Wed, 22 Jul 2009 06:29:58 GMT
Server: Apache
WWW-Authenticate: Basic realm="Po Pimping"
Accept-Ranges: bytes
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 878
Connection: close
Content-Type: text/html; charset=UTF-8
 
GET /htaccess/po.txt?testing=query HTTP/1.1
Host: www.askapache.com
User-Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1) AA_PassPro/1.9 (http://www.askapache.com/)
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Language: en-us
Accept-Encoding: gzip, deflate
Connection: close
Referer: http://www.askapache.com/
Authorization: Basic adfAGAltcA==
 
HTTP/1.1 200 OK
Date: Wed, 22 Jul 2009 06:29:58 GMT
Server: Apache
Last-Modified: Wed, 22 Jul 2009 05:54:39 GMT
Accept-Ranges: bytes
Cache-Control: max-age=3600
Expires: Wed, 22 Jul 2009 07:29:58 GMT
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 27
Connection: close
Content-Type: text/plain; charset=UTF-8
```````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````

.htaccess Directives

AcceptFilter, AcceptMutex, AcceptPathInfo, AccessFileName, Action, AddAlt, AddAltByEncoding, AddAltByType, AddCharset, AddDefaultCharset, AddDescription, AddEncoding, AddHandler, AddIcon, AddIconByEncoding, AddIconByType, AddInputFilter, AddLanguage, AddModuleInfo, AddOutputFilter, AddOutputFilterByType, AddType, Alias, AliasMatch, AllowCONNECT, AllowEncodedSlashes, AllowOverride, Anonymous, Anonymous_Authoritative, Anonymous_LogEmail, Anonymous_MustGiveEmail, Anonymous_NoUserID, Anonymous_NoUserId, Anonymous_VerifyEmail, AssignUserId, AuthAuthoritative, AuthBasicAuthoritative, AuthBasicProvider, AuthDBDUserPWQuery, AuthDBDUserRealmQuery, AuthDBM, AuthDBMAuthoritative, AuthDBMGroupFile, AuthDBMType, AuthDBMUserFile, AuthDefaultAuthoritative, AuthDigestAlgorithm, AuthDigestDomain, AuthDigestFile, AuthDigestGroupFile, AuthDigestNcCheck, AuthDigestNonceFormat, AuthDigestNonceLifetime, AuthDigestProvider, AuthDigestQop, AuthDigestShmemSize, AuthGroupFile, AuthLDAPAuthzEnabled, AuthLDAPBindDN, AuthLDAPBindON, AuthLDAPBindPassword, AuthLDAPCharsetConfig, AuthLDAPCompareDNOnServer, AuthLDAPDereferenceAliases, AuthLDAPEnabled, AuthLDAPFrontPageHack, AuthLDAPGroupAttribute, AuthLDAPGroupAttributeIsDN, AuthLDAPRemoteUserAttribute, AuthLDAPRemoteUserIsDN, AuthLDAPStartTLS, AuthLDAPURL, AuthLDAPUrl, AuthName, AuthType, AuthUserFile, AuthzDBMAuthoritative, AuthzDBMType, AuthzDefaultAuthoritative, AuthzGroupFileAuthoritative, AuthzLDAPAuthoritative, AuthzOwnerAuthoritative, AuthzUserAuthoritative, BS2000Account, BalancerMember, BrowserMatch, BrowserMatchNoCase, BufferedLogs, CGIMapExtension, CacheDefaultExpire, CacheDirLength, CacheDirLevels, CacheDisable, CacheEnable, CacheExpiryCheck, CacheFile, CacheForceCompletion, CacheGcClean, CacheGcDaily, CacheGcInterval, CacheGcMemUsage, CacheGcUnused, CacheIgnoreCacheControl, CacheIgnoreHeaders, CacheIgnoreNoLastMod, CacheLastModifiedFactor, CacheMaxExpire, CacheMaxFileSize, CacheMaxStreamingBuffer, CacheMinFileSize, CacheNegotiatedDocs, CacheRoot, CacheSize, CacheStoreNoStore, CacheStorePrivate, CacheTimeMargin, CharsetDefault, CharsetOptions, CharsetSourceEnc, CheckCaseOnly, CheckSpelling, ChildPerUserId, ContentDigest, CookieDomain, CookieExpires, CookieLog, CookieName, CookieStyle, CookieTracking, CoreDumpDirectory, CustomLog, DAV, DAVDepthInfinity, DAVGenericLockDB, DAVMinTimeout, DBDExptime, DBDKeep, DBDMax, DBDMin, DBDParams, DBDPersist, DBDPrepareSQL, DBDriver, Dav, DavDepthInfinity, DavGenericLockDB, DavLockDB, DavMinTimeout, DefaultIcon, DefaultLanguage, DefaultType, DeflateBufferSize, DeflateCompressionLevel, DeflateFilterNote, DeflateMemLevel, DeflateWindowSize, Directory, DirectoryIndex, DirectoryMatch, DirectorySlash, DocumentRoot, DumpIOInput, DumpIOOutput, EnableExceptionHook, EnableMMAP, EnableSendfile, ErrorDocument, ErrorLog, Example, ExpiresActive, ExpiresByType, ExpiresDefault, ExtFilterDefine, ExtFilterOptions, ExtendedStatus, FancyIndexing, FileETag, Files, FilesMatch, FilterChain, FilterDeclare, FilterProtocol, FilterProvider, FilterTrace, ForceLanguagePriority, ForceType, ForensicLog, GprofDir, GracefulShutdownTimeout, Group, Header, HeaderName, HostNameLookups, HostnameLookups, ISAIPFakeAsync, ISAPIAppendLogToErrors, ISAPIAppendLogToQuery, ISAPICacheFile, ISAPIFakeAsync, ISAPILogNotSupported, ISAPIReadAheadBuffer, IdentityCheck, IdentityCheckTimeout, IfDefine, IfModule, IfVersion, ImapBase, ImapDefault, ImapMenu, Include, IndexIgnore, IndexOptions, IndexOrderDefault, IndexStyleSheet, KeepAlive, KeepAliveTimeout, LDAPCacheEntries, LDAPCacheTTL, LDAPCertDBPath, LDAPConnectionTimeout, LDAPOpCacheEntries, LDAPOpCacheTTL, LDAPSharedCacheFile, LDAPSharedCacheSize, LDAPTrustedClientCert, LDAPTrustedGlobalCert, LDAPTrustedMode, LDAPVerifyServerCert, LanguagePriority, Limit, LimitExcept, LimitInternalRecursion, LimitRequestBody, LimitRequestFields, LimitRequestFieldsize, LimitRequestLine, LimitXMLRequestBody, Listen, ListenBacklog, LoadFile, LoadModule, Location, LocationMatch, LockFile, LogFormat, LogLevel, MCacheMaxObjectCount, MCacheMaxObjectSize, MCacheMaxStreamingBuffer, MCacheMinObjectSize, MCacheRemovalAlgorithm, MCacheSize, MMapFile, MaxClients, MaxKeepAliveRequests, MaxMemFree, MaxRequestsPerChild, MaxSpareServers, MaxSpareThreads, MaxSpareThreadsPerChild, MaxThreads, MetaDir, MetaFiles, MetaSuffix, MimeMagicFile, MinSpareServers, MinSpareThreads, ModMimeUsePathInfo, MultiviewsMatch, NWSSLTrustedCerts, NWSSLUpgradeable, NameVirtualHost, NoProxy, NumServers, Options, PassEnv, PerlAccessHandler, PerlAuthenHandler, PerlAuthzHandler, PerlChildExitHandler, PerlChildInitHandler, PerlCleanupHandler, PerlDispatchHandler, PerlFixupHandler, PerlFreshRestart, PerlHandler, PerlHeaderParserHandler, PerlInitHandler, PerlLogHandler, PerlModule, PerlPassEnv, PerlPostReadRequestHandler, PerlRequire, PerlRestartHandler, PerlSendHeader, PerlSetEnv, PerlSetVar, PerlSetupEnv, PerlTaintCheck, PerlTransHandler, PerlTypeHandler, PerlWarn, PidFile, Port, Protocol, ProtocolEcho, Proxy, ProxyBadHeader, ProxyBlock, ProxyDomain, ProxyErrorOverride, ProxyFtpDirCharset, ProxyIOBufferSize, ProxyMatch, ProxyMaxForwards, ProxyPass, ProxyPassInterpolateEnv, ProxyPassMatch, ProxyPassReverse, ProxyPassReverseCookieDomain, ProxyPassReverseCookiePath, ProxyPreserveHost, ProxyReceiveBufferSize, ProxyRemote, ProxyRemoteMatch, ProxyRequests, ProxySet, ProxyStatus, ProxyTimeout, ProxyVia, RLimitCPU, RLimitMEM, RLimitNPROC, ReadmeName, Redirect, RedirectMatch, RedirectPermanent, RedirectTemp, RemoveCharset, RemoveEncoding, RemoveHandler, RemoveInputFilter, RemoveLanguage, RemoveOutputFilter, RemoveType, RequestHeader, Require, RewriteBase, RewriteCond, RewriteEngine, RewriteLock, RewriteLog, RewriteLogLevel, RewriteMap, RewriteOptions, RewriteRule, SSIAccessEnable, SSIEndTag, SSIErrorMsg, SSIStartTag, SSITimeFormat, SSIUndefinedEcho, SSLCACertificateFile, SSLCACertificatePath, SSLCADNRequestFile, SSLCADNRequestPath, SSLCARevocationFile, SSLCARevocationPath, SSLCertificateChainFile, SSLCertificateFile, SSLCertificateKeyFile, SSLCipherSuite, SSLCryptoDevice, SSLEngine, SSLHonorCipherOrder, SSLLog, SSLLogLevel, SSLMutex, SSLOptions, SSLPassPhraseDialog, SSLProtocol, SSLProxyCACertificateFile, SSLProxyCACertificatePath, SSLProxyCARevocationFile, SSLProxyCARevocationPath, SSLProxyCipherSuite, SSLProxyEngine, SSLProxyMachineCertificateFile, SSLProxyMachineCertificatePath, SSLProxyProtocol, SSLProxyVerify, SSLProxyVerifyDepth, SSLRandomSeed, SSLRequire, SSLRequireSSL, SSLSessionCache, SSLSessionCacheTimeout, SSLUserName, SSLVerifyClient, SSLVerifyDepth, Satisfy, ScoreBoardFile, Script, ScriptAlias, ScriptAliasMatch, ScriptInterpreterSource, ScriptLog, ScriptLogBuffer, ScriptLogLength, ScriptStock, SecureListen, SendBufferSize, ServerAdmin, ServerAlias, ServerLimit, ServerName, ServerPath, ServerRoot, ServerSignature, ServerTokens, SetEnv, SetEnvIf, SetEnvIfNoCase, SetHandler, SetInputFilter, SetOutputFilter, StartServers, StartThreads, Substitute, SuexecUserGroup, ThreadLimit, ThreadStackSize, ThreadsPerChild, TimeOut, Timeout, TraceEnable, TransferLog, TypeAuthDBMUserFile, TypesConfig, UnsetEnv, UseCanonicalName, UseCanonicalPhysicalPort, User, UserDir, VirtualDocumentRoot, VirtualDocumentRootIP, VirtualHost, VirtualScriptAlias, VirtualScriptAliasIP, Win32DisableAcceptEx, XBitHack, allow, deny, order, php_admin_flag, php_admin_value, php_flag, php_value

You can view the plugins home page, old, or view it on the wordpress.org site.

An AskApache Plugin Upgrade to Rule them All originally appeared on AskApache.com

.htaccess is a very ancient configuration file that controls the Web Server running your website, and is one of the most powerful configuration files you will ever come across. Htaccess has the ability to control access of the WWW's HyperText Transfer Protocol (HTTP) using Password Protection, 301 Redirects, rewrites, and much much more. This is because this configuration file was coded in the earliest days of the web (HTTP), for one of the first Web Servers ever! Eventually these Web Servers (configured with htaccess) became known as the World Wide Web, and eventually grew into the Internet we use today.

This is not an introduction to .htaccess… This is the evolution of the best of the best .htaccess on the planet. Its changed over the years with more and better .htaccess tricks using real .htaccess example code. I add my favorite htaccess-related links and sites, results from my htaccess research, and frequently update this article.

You've come to the right place if you are looking to acquire mad skills for using .htaccess files.

Originally (2003) this guide was known in certain hacker circles and hidden corners of the net as an ultimate .htaccess due to the powerful htaccess tricks and tips to bypass security on a webhost, and also because many of the tricks and examples were pretty impressive back then in that group.

AskApache Htaccess Journey

Skip this - still under edit

I discovered these tips and tricks mostly while working as a network security penetration specialist hired to find security holes in web hosting environments. Shared hosting is the most common and cheapest form of web-hosting where multiple customers are placed on a single machine and "share" the resources (CPU/RAM/SPACE). The machines are configured to basically ONLY do HTTP and FTP. No shells or any interactive logins, no ssh, just FTP access. That is when I started examining htaccess files in great detail and learned about the incredible untapped power of htaccess. For 99% of the worlds best Apache admins, they don't use .htaccess much, if AT ALL. It's much easier, safer, and faster to configure Apache using the httpd.conf file instead. However, this file is almost never readable on shared-hosts, and I've never seen it writable. So the only avenue left for those on shared-hosting was and is the .htaccess file, and holy freaking fiber-optics.. it's almost as powerful as httpd.conf itself!

Most all .htaccess code works in the httpd.conf file, but not all httpd.conf code works in .htaccess files, around 50%. So all the best Apache admins and programmers never used .htaccess files. There was no incentive for those with access to httpd.conf to use htaccess, and the gap grew. It's common to see "computer gurus" on forums and mailing lists rail against all uses and users of .htaccess files, smugly announcing the well known problems with .htaccess files compared with httpd.conf - I wonder if these "gurus" know the history of the htaccess file, like it's use in the earliest versions of the HTTP Server- NCSA's HTTPd, which BTW, became known as Apache HTTP. So you could easily say that htaccess files predates Apache itself.

Once I discovered what .htaccess files could do towards helping me enumerate and exploit security vulnerabilities even on big shared-hosts I focused all my research into .htaccess files, meaning I was reading the venerable Apache HTTP Source code 24/7! I compiled every released version of the Apache Web Server, ever, even NCSA's, and focused on enumerating the most powerful htaccess directives. Good times! Because my focus was on protocol/file/network vulnerabilites instead of web dev I built up a nice toolbox of htaccess tricks to do unusual things. When I switched over to webdev in 2005 I started using htaccess for websites, not research. I documented most of my favorites and rewrote the htaccess guide for webdevelopers. After some great encouragement on various forums and nets I decided to start a blog to share my work with everyone, AskApache.com was registered, I published my guide, and it was quickly plagiarized and scraped all over the net. Information is freedom, and freedom is information, so this blog has the least restrictive copyright for you. Feel free to modify, copy, republish, sell, or use anything on this site ;)

Htaccess - Evolved

The Hyper Text Transfer Protocol (HTTP) was initiated at the CERN in Geneve (Switzerland), where it emerged (together with the HTML presentation language) from the need to exchange scientific information on a computer network in a simple manner. The first public HTTP implementation only allowed for plain text information, and almost instantaneously became a replacement of the GOPHER service. One of the first text-based browsers was LYNX which still exists today; a graphical HTTP client appeared very quickly with the name NCSA Mosaic. Mosaic was a popular browser back in 1994. Soon the need for a more rich multimedia experience was born, and the markup language provided support for a growing multitude of media types.

Htaccess file know-how will do several things for you:

• Make your website noticeably faster.
• Allow you to debug your server with ease.
• Make your life easier and more rewarding.
• Allow you to work faster and more productively.

What Is .htaccess

Specifically, .htaccess is the default file name of a special configuration file that provides a number of directives (commands) for controlling and configuring the Apache Web Server, and also to control and configure modules that can be built into the Apache installation, or included at run-time like mod_rewrite (for htaccess rewrite), mod_alias (for htaccess redirects), and mod_ssl (for controlling SSL connections).

Htaccess allows for decentralized management of Web Server configurations which makes life very easy for web hosting companies and especially their savvy consumers. They set up and run "server farms" where many hundreds and thousands of web hosting customers are all put on the same Apache Server. This type of hosting is called "virtual hosting" and without .htaccess files would mean that every customer must use the same exact settings as everyone else on their segment. So that is why any half-decent web host allows/enables (DreamHost, Powweb, MediaTemple, GoDaddy) .htaccess files, though few people are aware of it. Let's just say that if I was a customer on your server-farm, and .htaccess files were enabled, my websites would be a LOT faster than yours, as these configuration files allow you to fully take advantage of and utilize the resources allotted to you by your host. If even 1/10 of the sites on a server-farm took advantage of what they are paying for, the providers would go out of business.

One of the design goals for this server was to maintain external compatibility with the NCSA 1.3 server --- that is, to read the same configuration files, to process all the directives therein correctly, and in general to be a drop-in replacement for NCSA. On the other hand, another design goal was to move as much of the server's functionality into modules which have as little as possible to do with the monolithic server core. The only way to reconcile these goals is to move the handling of most commands from the central server into the modules.

However, just giving the modules command tables is not enough to divorce them completely from the server core. The server has to remember the commands in order to act on them later. That involves maintaining data which is private to the modules, and which can be either per-server, or per-directory. Most things are per-directory, including in particular access control and authorization information, but also information on how to determine file types from suffixes, which can be modified by AddType and DefaultType directives, and so forth. In general, the governing philosophy is that anything which can be made configurable by directory should be; per-server information is generally used in the standard set of modules for information like Aliases and Redirects which come into play before the request is tied to a particular place in the underlying file system.

Another requirement for emulating the NCSA server is being able to handle the per-directory configuration files, generally called .htaccess files, though even in the NCSA server they can contain directives which have nothing at all to do with access control. Accordingly, after URI -> filename translation, but before performing any other phase, the server walks down the directory hierarchy of the underlying filesystem, following the translated pathname, to read any .htaccess files which might be present. The information which is read in then has to be merged with the applicable information from the server's own config files (either from the <directory> sections in access.conf, or from defaults in srm.conf, which actually behaves for most purposes almost exactly like <directory />).

Finally, after having served a request which involved reading .htaccess files, we need to discard the storage allocated for handling them. That is solved the same way it is solved wherever else similar problems come up, by tying those structures to the per-transaction resource pool.

Creating Htaccess Files

Htaccess files use the default filename ".htaccess" but any unix-style file name can be specified from the main server config using the AccessFileName directive. The file isn't .htaccess.txt, its literally just named .htaccess.

In a Windows Environment like the one I use for work, you can change how Windows opens and views .htaccess files by modifying the Folder Options in explorer. As you can see, on my computer files ending in .htaccess are recognized as having the HTACCESS extension and are handled/opened by Adobe Dreamweaver CS4.

Htaccess Scope

Unlike the main server configuration files like httpd.conf, Htaccess files are read on every request therefore changes in these files take immediate effect. Apache searches all directories and subdirectories that are htaccess-enabled for an .htaccess file which results in performance loss due to file accesses. I've never noticed a performance loss but OTOH, I know how to use them. If you do have access to your main server configuration file, you should of course use that instead, and lucky for you ALL the .htaccess tricks and examples can be used there as well (just not vice versa).

Htaccess File Syntax

Htaccess files follow the same syntax as the main Apache configuration files, for powerusers here's an apache.vim for VI. The one main difference is the context of the directive, which means whether or not that directive is ALLOWED to be used inside of an .htaccess file. Htaccess files are incredibly powerful, and can also be very dangerous as some directives allowed in the main configuration files would allow users/customers to completely bypass security/bandwidth-limits/resource-limits/file-permissions, etc.. About 1/4 of all Apache directives cannot be used inside an .htaccess file (also known as a per-directory context config). The Apache Developers are well-regarded throughout the world as being among some of the best programmers, ever. To enable a disallowed directive inside a .htaccess file would require modifying the source code and re-compiling the server (which they allow and encourage if you are the owner/admin). Here's a taste of that famous Apache source code that builds the directives allowed in .htaccess file context, the key that tells whether its enabled in .htaccess context is the DIR_CMD_PERMS and then the OR_FILEINFO, which means a directive is enabled dependent on the AllowOverride directive that is only allowed in the main config. First Apache 1.3.0, then Apache 2.2.10

mod_autoindex

AddIcon, add_icon, BY_PATH, DIR_CMD_PERMS, an icon URL followed by one or more filenames
AddIconByType, add_icon, BY_TYPE, DIR_CMD_PERMS, an icon URL followed by one or more MIME types
AddIconByEncoding, add_icon, BY_ENCODING, DIR_CMD_PERMS, an icon URL followed by one or more content encodings
AddAlt, add_alt, BY_PATH, DIR_CMD_PERMS, alternate descriptive text followed by one or more filenames
AddAltByType, add_alt, BY_TYPE, DIR_CMD_PERMS, alternate descriptive text followed by one or more MIME types
AddAltByEncoding, add_alt, BY_ENCODING, DIR_CMD_PERMS, alternate descriptive text followed by one or more content encodings
IndexOptions, add_opts, DIR_CMD_PERMS, RAW_ARGS, one or more index options
IndexIgnore, add_ignore, DIR_CMD_PERMS, ITERATE, one or more file extensions
AddDescription, add_desc, BY_PATH, DIR_CMD_PERMS, Descriptive text followed by one or more filenames
HeaderName, add_header, DIR_CMD_PERMS, TAKE1, a filename
ReadmeName, add_readme, DIR_CMD_PERMS, TAKE1, a filename
FancyIndexing, fancy_indexing, DIR_CMD_PERMS, FLAG, Limited to 'on' or 'off' (superseded by IndexOptions FancyIndexing)
DefaultIcon, ap_set_string_slot, (void *) XtOffsetOf(autoindex_config_rec, default_icon), DIR_CMD_PERMS, TAKE1, an icon URL

mod_rewrite

// mod_rewrite
RewriteEngine, cmd_rewriteengine, OR_FILEINFO, On or Off to enable or disable (default)
RewriteOptions, cmd_rewriteoptions, OR_FILEINFO, List of option strings to set
RewriteBase, cmd_rewritebase, OR_FILEINFO, the base URL of the per-directory context
RewriteCond, cmd_rewritecond, OR_FILEINFO, an input string and a to be applied regexp-pattern
RewriteRule, cmd_rewriterule, OR_FILEINFO, an URL-applied regexp-pattern and a substitution URL
RewriteMap, cmd_rewritemap, RSRC_CONF, a mapname and a filename
RewriteLock, cmd_rewritelock, RSRC_CONF, the filename of a lockfile used for inter-process synchronization
RewriteLog, cmd_rewritelog, RSRC_CONF, the filename of the rewriting logfile
RewriteLogLevel, cmd_rewriteloglevel, RSRC_CONF, the level of the rewriting logfile verbosity (0=none, 1=std, .., 9=max)
RewriteLog, fake_rewritelog, RSRC_CONF, [DISABLED] the filename of the rewriting logfile
RewriteLogLevel, fake_rewritelog, RSRC_CONF, [DISABLED] the level of the rewriting logfile verbosity

Htaccess Directives

Don't ask why, but I personally downloaded each major/beta release of the Apache HTTPD source code from version 1.3.0 to version 2.2.10 (all 63 Apache versions!), then I configured and compiled each version for a custom HTTPD installation built from source. This allowed me to find every directive allowed in .htaccess files for each particular version, which has never been done before, or since. YES! I think that is so cool..

An .htaccess directive is basically a command that is specific to a module or builtin to the core that performs a specific task or sets a specific setting for how Apache serves your WebSite. Directives placed in Htaccess files apply to the directory they are in, and all sub-directories. Here's the 3 top links (official Apache Docs) you will repeatedly use, bookmark/print/save them.

1. Terms Used to Describe Directives
2. Official List of Apache Directives
3. Directive Quick-Reference -- with Context

Litespeed Htaccess support

Unlike other lightweight web servers, Apache compatible per-directory configuration overridden is fully supported by LiteSpeed Web Server. With .htacess you can change configurations for any directory under document root on-the-fly, which in most cases is a mandatory feature in shared hosting environment. It is worth noting that enabling .htaccess support in LiteSpeed Web Server will not degrade server's performance, comparing to Apache's 40% drop in performance.

Main Server Config Examples

Now lets take a look at some htaccess examples to get a feel for the syntax and some general ideas at the capabilities. Some of the best examples for .htaccess files are included with Apache for main server config files, so lets take a quick look at a couple of them on our way down to the actual .htaccess examples further down the page (this site has thousands, take your time). As you can see, the basic syntax is a line starting with # is a comment, everything else are directives followed by the directive argument.

httpd-multilang-errordoc.conf: The configuration below implements multi-language error documents through content-negotiation

Options IncludesNoExec
AddOutputFilter Includes html
AddHandler type-map var
LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
ForceLanguagePriority Prefer Fallback
ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var

httpd-manual.conf: Provide local access to the server documentation on your server

SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|pt-br|ru|tr)/ prefer-language=$1
RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|pt-br|ru|tr)){2, }(/.*)?$ /manual/$1$2
LanguagePriority en de es fr ja ko pt-br ru tr
ForceLanguagePriority Prefer Fallback

httpd-languages.conf: Settings for hosting different languages.

DefaultLanguage en
AddLanguage ca .ca
# Just list the languages in decreasing order of preference.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv tr zh-CN zh-TW
# Commonly used filename extensions to character sets.
AddCharset us-ascii.ascii .us-ascii
AddCharset ISO-8859-1  .iso8859-1  .latin1

httpd-autoindex.conf: Directives controlling the display of server-generated directory listings.

# IndexOptions: Controls the appearance of server-generated directory listings.
IndexOptions FancyIndexing HTMLTable VersionSort
# AddIcon* directives tell the server which icon to show for different files or filename extensions.
AddIconByEncoding (CMP, /icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT, /icons/text.gif) text/*
AddIcon /icons/folder.gif ^^DIRECTORY^^
# DefaultIcon is which icon to show for files which do not have an icon explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in server-generated indexes.
AddDescription "GZIP compressed document" .gz
# ReadmeName is the name of the README file the server will look for by default, and append to directory listings.
ReadmeName README.html
# HeaderName is the name of a file which should be prepended to directory indexes.
HeaderName HEADER.html

Here are the rest of them if you wanna take a look. (httpd-mpm.conf, httpd-default.conf, httpd-ssl.conf, httpd-info.conf, httpd-vhosts.conf, httpd-dav.conf)

Example .htaccess Files

Here are some samples and examples taken from different .htaccess files I've used over the years. Specific solutions are farther down on this page and throughout the site.

# Set the Time Zone of your Server
SetEnv TZ America/Indianapolis
# ServerAdmin:  This address appears on some server-generated pages, such as error documents.
SetEnv SERVER_ADMIN webmaster@askapache.com
# Possible values for the Options directive are "None", "All", or any combination of:
#  Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
Options -ExecCGI -MultiViews -Includes -Indexes FollowSymLinks
# DirectoryIndex: sets the file that Apache will serve if a directory is requested.
DirectoryIndex index.html index.php /index.php
#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#
Action php5-cgi /bin/php.cgi
#
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
#
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#
AddHandler php-cgi .php .inc
# Commonly used filename extensions to character sets.
AddDefaultCharset UTF-8
# AddType allows you to add to or override the MIME configuration
AddType 'application/rdf+xml; charset=UTF-8' .rdf
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml
AddType 'application/xhtml+xml; charset=UTF-8' .xhtml.gz
AddType 'text/html; charset=UTF-8' .html
AddType 'text/html; charset=UTF-8' .html.gz
AddType application/octet-stream .rar .chm .bz2 .tgz .msi .pdf .exe
AddType application/vnd.ms-excel .csv
AddType application/x-httpd-php-source .phps
AddType application/x-pilot .prc .pdb
AddType application/x-shockwave-flash .swf
AddType application/xrds+xml .xrdf
AddType text/plain .ini .sh .bsh .bash .awk .nawk .gawk .csh .var .c .in .h .asc .md5 .sha .sha1
AddType video/x-flv .flv
# AddEncoding allows you to have certain browsers uncompress information on the fly. Note: Not all browsers support this.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# DefaultType: the default MIME type the server will use for a document.
DefaultType text/html
#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of:  On | Off | EMail
#
ServerSignature Off

## MAIN DEFAULTS
Options +ExecCGI -Indexes
DirectoryIndex index.html index.htm index.php
DefaultLanguage en-US
AddDefaultCharset UTF-8
ServerSignature Off
## ENVIRONMENT VARIABLES
SetEnv PHPRC /webroot/includes
SetEnv TZ America/Indianapolis
 
SetEnv SERVER_ADMIN webmaster@askapache.com
## MIME TYPES
AddType video/x-flv .flv
AddType application/x-shockwave-flash .swf
AddType image/x-icon .ico
## FORCE FILE TO DOWNLOAD INSTEAD OF APPEAR IN BROWSER
# http://www.htaccesselite.com/addtype-addhandler-action-vf6.html
AddType application/octet-stream .mov .mp3 .zip
## ERRORDOCUMENTS
# http://askapache.com/htaccess/apache-status-code-headers-errordocument.html
ErrorDocument 400 /e400/
ErrorDocument 401 /e401/
ErrorDocument 402 /e402/
ErrorDocument 403 /e403/
ErrorDocument 404 /e404/
#
# Handlers be builtin, included in a module, or added with Action directive
# default-handler: default, handles static content (core)
#   send-as-is: Send file with HTTP headers (mod_asis)
#   cgi-script: treat file as CGI script (mod_cgi)
#    imap-file: Parse as an imagemap rule file (mod_imap)
#   server-info: Get server config info (mod_info)
#  server-status: Get server status report (mod_status)
#    type-map: type map file for content negotiation (mod_negotiation)
#  fastcgi-script: treat file as fastcgi script (mod_fastcgi)
#
# http://www.askapache.com/php/custom-phpini-tips-and-tricks.html
## PARSE AS CGI
AddHandler cgi-script .cgi .pl .spl
## RUN PHP AS APACHE MODULE
AddHandler application/x-httpd-php .php .htm
## RUN PHP AS CGI
AddHandler php-cgi .php .htm
## CGI PHP WRAPPER FOR CUSTOM PHP.INI
AddHandler phpini-cgi .php .htm
Action phpini-cgi /cgi-bin/php5-custom-ini.cgi
## FAST-CGI SETUP WITH PHP-CGI WRAPPER FOR CUSTOM PHP.INI
AddHandler fastcgi-script .fcgi
AddHandler php-cgi .php .htm
Action php-cgi /cgi-bin/php5-wrapper.fcgi
## CUSTOM PHP CGI BINARY SETUP
AddHandler php-cgi .php .htm
Action php-cgi /cgi-bin/php.cgi
## PROCESS SPECIFIC FILETYPES WITH CGI-SCRIPT
Action image/gif /cgi-bin/img-create.cgi
## CREATE CUSTOM HANDLER FOR SPECIFIC FILE EXTENSIONS
AddHandler custom-processor .ssp
Action custom-processor /cgi-bin/myprocessor.cgi
### HEADER CACHING
# http://www.askapache.com/htaccess/speed-up-sites-with-htaccess-caching.html
<FilesMatch "\.(flv|gif|jpg|jpeg|png|ico)$">
Header set Cache-Control "max-age=2592000"
</FilesMatch>
<FilesMatch "\.(js|css|pdf|swf)$">
Header set Cache-Control "max-age=604800"
</FilesMatch>
<FilesMatch "\.(html|htm|txt)$">
Header set Cache-Control "max-age=600"
</FilesMatch>
<FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$">
Header unset Cache-Control
</FilesMatch>
## ALTERNATE EXPIRES CACHING
# htaccesselite.com/d/use-htaccess-to-speed-up-your-site-discussion-vt67.html
ExpiresActive On
ExpiresDefault A604800
ExpiresByType image/x-icon A2592000
ExpiresByType application/x-javascript A2592000
ExpiresByType text/css A2592000
ExpiresByType text/html A300
<FilesMatch "\.(pl|php|cgi|spl|scgi|fcgi)$">
ExpiresActive Off
</FilesMatch>
## META HTTP-EQUIV REPLACEMENTS
<FilesMatch "\.(html|htm|php)$">
Header set imagetoolbar "no"
</FilesMatch>

Here are some default MOD_REWRITE code examples.

## REWRITE DEFAULTS
RewriteEngine On
RewriteBase /
## REQUIRE SUBDOMAIN
RewriteCond %{HTTP_HOST} !^$
RewriteCond %{HTTP_HOST} !^subdomain\.askapache\.com$ [NC]
RewriteRule ^/(.*)$ http://subdomain.askapache.com/$1 [L,R=301]
## SEO REWRITES
RewriteRule ^(.*)/ve/(.*)$ $1/voluntary-employee/$2 [L,R=301]
RewriteRule ^(.*)/hsa/(.*)$ $1/health-saving-account/$2 [L,R=301]
## WORDPRESS
RewriteCond %{REQUEST_FILENAME} !-f  # Existing File
RewriteCond %{REQUEST_FILENAME} !-d  # Existing Directory
RewriteRule . /index.php [L]
## ALTERNATIVE ANTI-HOTLINKING
RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{HTTP_REFERER} !^http://(subdomain\.)?askapache.com/.*$ [NC]
RewriteRule ^.*\.(bmp|tif|gif|jpg|jpeg|jpe|png)$ - [F]
## REDIRECT HOTLINKERS
RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{HTTP_REFERER} !^http://(subdomain\.)?askapache.com/.*$ [NC]
RewriteRule ^.*\.(bmp|tif|gif|jpg|jpeg|jpe|png)$ http://google.com [R]
## DENY REQUEST BASED ON REQUEST METHOD
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK|OPTIONS|HEAD)$ [NC]
RewriteRule ^.*$ - [F]
## REDIRECT UPLOADS
RewriteCond %{REQUEST_METHOD} ^(PUT|POST)$ [NC]
RewriteRule ^(.*)$ /cgi-bin/form-upload-processor.cgi?p=$1 [L,QSA]
## REQUIRE SSL EVEN WHEN MOD_SSL IS NOT LOADED
RewriteCond %{HTTPS} !=on [NC]
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [R,L]
### ALTERNATATIVE TO USING ERRORDOCUMENT
# http://www.htaccesselite.com/d/htaccess-errordocument-examples-vt11.html
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^.*$ /error.php [L]
## SEO REDIRECTS
Redirect 301 /2006/oldfile.html http://subdomain.askapache.com/newfile.html
RedirectMatch 301 /o/(.*)$ http://subdomain.askapache.com/s/dl/$1

Examples of protecting your files and securing with password protection.

#
# Require (user|group|valid-user) (username|groupname)
#
## BASIC PASSWORD PROTECTION
AuthType basic
AuthName "prompt"
AuthUserFile /.htpasswd
AuthGroupFile /dev/null
Require valid-user
## ALLOW FROM IP OR VALID PASSWORD
Require valid-user
Allow from 192.168.1.23
Satisfy Any
## PROTECT FILES
<FilesMatch "\.(htaccess|htpasswd|ini|phps|fla|psd|log|sh)$">
Order Allow,Deny
Deny from all
</FilesMatch>
## PREVENT HOTLINKING
SetEnvIfNoCase Referer "^http://subdomain.askapache.com/" good
SetEnvIfNoCase Referer "^$" good
<FilesMatch "\.(png|jpg|jpeg|gif|bmp|swf|flv)$">
Order Deny,Allow
Deny from all
Allow from env=good
ErrorDocument 403 http://www.google.com/intl/en_ALL/images/logo.gif
ErrorDocument 403 /images/you_bad_hotlinker.gif
</FilesMatch>
## LIMIT UPLOAD FILE SIZE TO PROTECT AGAINST DOS ATTACK
#bytes, 0-2147483647(2GB)
LimitRequestBody 10240000
## MOST SECURE WAY TO REQUIRE SSL
# http://www.askapache.com/htaccess/apache-ssl-in-htaccess-examples.html
SSLOptions +StrictRequire
SSLRequireSSL
SSLRequire %{HTTP_HOST} eq "askapache.com"
ErrorDocument 403 https://askapache.com
## COMBINED DEVELOPER HTACCESS CODE-USE THIS
<FilesMatch "\.(flv|gif|jpg|jpeg|png|ico|js|css|pdf|swf|html|htm|txt)$">
Header set Cache-Control "max-age=5"
</FilesMatch>
AuthType basic
AuthName "Ooops! Temporarily Under Construction..."
AuthUserFile /.htpasswd
AuthGroupFile /dev/null
Require valid-user      # password prompt for everyone else
Order Deny,Allow
Deny from all
Allow from 192.168.64.5   # Your, the developers IP address
Allow from w3.org      # css/xhtml check jigsaw.w3.org/css-validator/
Allow from googlebot.com   # Allows google to crawl your pages
Satisfy Any        # no password required if host/ip is Allowed
## DONT HAVE TO EMPTY CACHE OR RELOAD TO SEE CHANGES
ExpiresDefault A5 #If using mod_expires
<FilesMatch "\.(flv|gif|jpg|jpeg|png|ico|js|css|pdf|swf|html|htm|txt)$">
Header set Cache-Control "max-age=5"
</FilesMatch>
## ALLOW ACCESS WITH PASSWORD OR NO PASSWORD FOR SPECIFIC IP/HOSTS
AuthType basic
AuthName "Ooops! Temporarily Under Construction..."
AuthUserFile /.htpasswd
AuthGroupFile /dev/null
Require valid-user      # password prompt for everyone else
Order Deny,Allow
Deny from all
Allow from 192.168.64.5   # Your, the developers IP address
Allow from w3.org      # css/xhtml check jigsaw.w3.org/css-validator/
Allow from googlebot.com   # Allows google to crawl your pages
Satisfy Any        # no password required if host/ip is Allowed

Example .htaccess Code Snippets

Here are some specific examples, this is the most popular section of this page. Updated frequently.

Redirect Everyone Except IP address to alternate page

ErrorDocument 403 http://www.yahoo.com/
Order deny,allow
Deny from all
Allow from 208.113.134.190

When developing sites

This lets google crawl the page, lets me access without a password, and lets my client access the page WITH a password. It also allows for XHTML and CSS validation! (w3.org)

AuthName "Under Development"
AuthUserFile /home/sitename.com/.htpasswd
AuthType basic
Require valid-user
Order deny,allow
Deny from all
Allow from 208.113.134.190 w3.org htmlhelp.com googlebot.com
Satisfy Any

Fix double-login prompt

Redirect non-https requests to https server and ensure that .htpasswd authorization can only be entered across HTTPS

SSLOptions +StrictRequire
SSLRequireSSL
SSLRequire %{HTTP_HOST} eq "askapache.com"
ErrorDocument 403 https://askapache.com

Set Timezone of the Server (GMT)

SetEnv TZ America/Indianapolis

Administrator Email for ErrorDocument

SetEnv SERVER_ADMIN webmaster@google.com

ServerSignature for ErrorDocument

ServerSignature off | on | email

Charset and Language headers

Article: Setting Charset in htaccess, and article by Richard Ishida

AddDefaultCharset UTF-8
DefaultLanguage en-US

Disallow Script Execution

Options -ExecCGI
AddHandler cgi-script .php .pl .py .jsp .asp .htm .shtml .sh .cgi

Deny Request Methods

RewriteCond %{REQUEST_METHOD} !^(GET|HEAD|OPTIONS|POST|PUT)
RewriteRule .* - [F]

Force "File Save As" Prompt

AddType application/octet-stream .avi .mpg .mov .pdf .xls .mp4

Show CGI Source Code

RemoveHandler cgi-script .pl .py .cgi
AddType text/plain .pl .py .cgi

Serve all .pdf files on your site using .htaccess and mod_rewrite with the php script.

RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} -f
RewriteRule ^(.+)\.pdf$  /cgi-bin/pdf.php?file=$1 [L,NC,QSA]

Rewrite to www

RewriteCond %{REQUEST_URI} !^/(robots\.txt|favicon\.ico|sitemap\.xml)$
RewriteCond %{HTTP_HOST} !^www\.askapache\.com$ [NC]
RewriteRule ^(.*)$ http://www.askapache.com/$1 [R=301,L]

Rewrite to www dynamically

RewriteCond %{REQUEST_URI} !^/robots\.txt$ [NC]
RewriteCond %{HTTP_HOST} !^www\.[a-z-]+\.[a-z]{2,6} [NC]
RewriteCond %{HTTP_HOST} ([a-z-]+\.[a-z]{2,6})$   [NC]
RewriteRule ^/(.*)$ http://%1/$1 [R=301,L]

301 Redirect Old File

Redirect 301 /old/file.html http://www.askapache.com/new/file.html

301 Redirect Entire Directory

RedirectMatch 301 /blog(.*) http://www.askapache.com/$1

Protecting your php.cgi

<FilesMatch "^php5?\.(ini|cgi)$">
Order Deny,Allow
Deny from All
Allow from env=REDIRECT_STATUS
</FilesMatch>

Set Cookie based on Request

This code sends the Set-Cookie header to create a cookie on the client with the value of a matching item in 2nd parantheses.

RewriteEngine On
RewriteBase /
RewriteRule ^(.*)(de|es|fr|it|ja|ru|en)/$ - [co=lang:$2:.askapache.com:7200:/]

Set Cookie with env variable

Header set Set-Cookie "language=%{lang}e; path=/;" env=lang

Custom ErrorDocuments

ErrorDocument 100 /100_CONTINUE
ErrorDocument 101 /101_SWITCHING_PROTOCOLS
ErrorDocument 102 /102_PROCESSING
ErrorDocument 200 /200_OK
ErrorDocument 201 /201_CREATED
ErrorDocument 202 /202_ACCEPTED
ErrorDocument 203 /203_NON_AUTHORITATIVE
ErrorDocument 204 /204_NO_CONTENT
ErrorDocument 205 /205_RESET_CONTENT
ErrorDocument 206 /206_PARTIAL_CONTENT
ErrorDocument 207 /207_MULTI_STATUS
ErrorDocument 300 /300_MULTIPLE_CHOICES
ErrorDocument 301 /301_MOVED_PERMANENTLY
ErrorDocument 302 /302_MOVED_TEMPORARILY
ErrorDocument 303 /303_SEE_OTHER
ErrorDocument 304 /304_NOT_MODIFIED
ErrorDocument 305 /305_USE_PROXY
ErrorDocument 307 /307_TEMPORARY_REDIRECT
ErrorDocument 400 /400_BAD_REQUEST
ErrorDocument 401 /401_UNAUTHORIZED
ErrorDocument 402 /402_PAYMENT_REQUIRED
ErrorDocument 403 /403_FORBIDDEN
ErrorDocument 404 /404_NOT_FOUND
 
ErrorDocument 405 /405_METHOD_NOT_ALLOWED
ErrorDocument 406 /406_NOT_ACCEPTABLE
ErrorDocument 407 /407_PROXY_AUTHENTICATION_REQUIRED
ErrorDocument 408 /408_REQUEST_TIME_OUT
ErrorDocument 409 /409_CONFLICT
ErrorDocument 410 /410_GONE
ErrorDocument 411 /411_LENGTH_REQUIRED
ErrorDocument 412 /412_PRECONDITION_FAILED
ErrorDocument 413 /413_REQUEST_ENTITY_TOO_LARGE
ErrorDocument 414 /414_REQUEST_URI_TOO_LARGE
ErrorDocument 415 /415_UNSUPPORTED_MEDIA_TYPE
ErrorDocument 416 /416_RANGE_NOT_SATISFIABLE
ErrorDocument 417 /417_EXPECTATION_FAILED
ErrorDocument 422 /422_UNPROCESSABLE_ENTITY
ErrorDocument 423 /423_LOCKED
ErrorDocument 424 /424_FAILED_DEPENDENCY
ErrorDocument 426 /426_UPGRADE_REQUIRED
ErrorDocument 500 /500_INTERNAL_SERVER_ERROR
ErrorDocument 501 /501_NOT_IMPLEMENTED
ErrorDocument 502 /502_BAD_GATEWAY
ErrorDocument 503 /503_SERVICE_UNAVAILABLE
ErrorDocument 504 /504_GATEWAY_TIME_OUT
ErrorDocument 505 /505_VERSION_NOT_SUPPORTED
ErrorDocument 506 /506_VARIANT_ALSO_VARIES
ErrorDocument 507 /507_INSUFFICIENT_STORAGE
ErrorDocument 510 /510_NOT_EXTENDED

Implementing a Caching Scheme with .htaccess

# year
<FilesMatch "\.(ico|pdf|flv|jpg|jpeg|png|gif|swf|mp3|mp4)$">
Header set Cache-Control "public"
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
Header unset Last-Modified
</FilesMatch>
#2 hours
<FilesMatch "\.(html|htm|xml|txt|xsl)$">
Header set Cache-Control "max-age=7200, must-revalidate"
</FilesMatch>
<FilesMatch "\.(js|css)$">
SetOutputFilter DEFLATE
Header set Expires "Thu, 15 Apr 2010 20:00:00 GMT"
</FilesMatch>

Password Protect single file

<Files login.php>
AuthName "Prompt"
AuthType Basic
AuthUserFile /home/askapache.com/.htpasswd
Require valid-user
</Files>

Password Protect multiple files

<FilesMatch "^(private|phpinfo)\.*$">
AuthName "Development"
AuthUserFile /.htpasswd
AuthType basic
Require valid-user
</FilesMatch>

Send Custom Headers

Header set P3P "policyref=\"http://www.askapache.com/w3c/p3p.xml\""
Header set X-Pingback "http://www.askapache.com/xmlrpc.php"
Header set Content-Language "en-US"
Header set Vary "Accept-Encoding"

Blocking based on User-Agent Header

SetEnvIfNoCase ^User-Agent$ .*(craftbot|download|extract|stripper|sucker|ninja|clshttp|webspider|leacher|collector|grabber|webpictures) HTTP_SAFE_BADBOT
SetEnvIfNoCase ^User-Agent$ .*(libwww-perl|aesop_com_spiderman) HTTP_SAFE_BADBOT
Deny from env=HTTP_SAFE_BADBOT

Blocking with RewriteCond

RewriteCond %{HTTP_USER_AGENT} ^.*(craftbot|download|extract|stripper|sucker|ninja|clshttp|webspider|leacher|collector|grabber|webpictures).*$ [NC]
RewriteRule . - [F,L]

.htaccess for mod_php

SetEnv PHPRC /location/todir/containing/phpinifile

.htaccess for php as cgi

AddHandler php-cgi .php .htm
Action php-cgi /cgi-bin/php5.cgi

Shell wrapper for custom php.ini

#!/bin/sh
export PHP_FCGI_CHILDREN=3
exec php5.cgi -c /abs/php5/php.ini

Add values from HTTP Headers

SetEnvIfNoCase ^If-Modified-Since$ "(.+)" HTTP_IF_MODIFIED_SINCE=$1
SetEnvIfNoCase ^If-None-Match$ "(.+)" HTTP_IF_NONE_MATCH=$1
SetEnvIfNoCase ^Cache-Control$ "(.+)" HTTP_CACHE_CONTROL=$1
SetEnvIfNoCase ^Connection$ "(.+)" HTTP_CONNECTION=$1
SetEnvIfNoCase ^Keep-Alive$ "(.+)" HTTP_KEEP_ALIVE=$1
SetEnvIfNoCase ^Authorization$ "(.+)" HTTP_AUTHORIZATION=$1
SetEnvIfNoCase ^Cookie$ "(.+)" HTTP_MY_COOKIE=$1

Stop hotlinking

RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{HTTP_REFERER} !^http://(www\.)?askapache.com/.*$ [NC]
RewriteRule \.(gif|jpg|swf|flv|png)$ http://www.askapache.com/feed.gif [R=302,L]

Turn logging off for IP

SecFilterSelective REMOTE_ADDR "208\.113\.183\.103" "nolog,noauditlog,pass"

Turn logging on for IP

SecFilterSelective REMOTE_ADDR "!^208\.113\.183\.103" "nolog,noauditlog,pass"
SecFilterSelective REMOTE_ADDR "208\.113\.183\.103" "log,auditlog,pass"

Advanced Mod_Rewrite Examples

Here are some specific examples taken mostly from my WordPress Password Protection plugin, that also does alot more than password protection as you can see from the following mod_rewrite examples. These are a few of the mod_rewrite uses that BlogSecurity declared pushed the boundaries of Mod_Rewrite! Some of these snippets are quite exotic and unlike anything you may have seen before, also only for those who understand them as they can kill a website pretty quick.

Directory Protection

Enable the DirectoryIndex Protection, preventing directory index listings and defaulting. [Disable]

Options -Indexes
DirectoryIndex index.html index.php /index.php

Password Protect wp-login.php

Requires a valid user/pass to access the login page[401]

<Files wp-login.php>
Order Deny,Allow
Deny from All
Satisfy Any
AuthName "Protected By AskApache"
AuthUserFile /home/askapache.com/.htpasswda1
AuthType Basic
Require valid-user
</Files>

Password Protect wp-admin

Requires a valid user/pass to access any non-static (css, js, images) file in this directory.[401]

Options -ExecCGI -Indexes +FollowSymLinks -Includes
DirectoryIndex index.php /index.php
Order Deny,Allow
Deny from All
Satisfy Any
AuthName "Protected By AskApache"
AuthUserFile /home/askapache.com/.htpasswda1
AuthType Basic
Require valid-user
<FilesMatch "\.(ico|pdf|flv|jpg|jpeg|mp3|mpg|mp4|mov|wav|wmv|png|gif|swf|css|js)$">
Allow from All
</FilesMatch>
<FilesMatch "(async-upload)\.php$">
<IfModule mod_security.c>
SecFilterEngine Off
</IfModule>
Allow from All
</FilesMatch>

Protect wp-content

Denies any Direct request for files ending in .php with a 403 Forbidden.. May break plugins/themes [401]

RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /wp-content/.*$ [NC]
RewriteCond %{REQUEST_FILENAME} !^.+flexible-upload-wp25js.php$
RewriteCond %{REQUEST_FILENAME} ^.+\.(php|html|htm|txt)$
RewriteRule .* - [F,NS,L]

Protect wp-includes

Denies any Direct request for files ending in .php with a 403 Forbidden.. May break plugins/themes [403]

RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /wp-includes/.*$ [NC]
RewriteCond %{THE_REQUEST} !^[A-Z]{3,9}\ /wp-includes/js/.+/.+\ HTTP/ [NC]
RewriteCond %{REQUEST_FILENAME} ^.+\.php$
RewriteRule .* - [F,NS,L]

Common Exploits

Block common exploit requests with 403 Forbidden. These can help alot, may break some plugins. [403]

RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ ///.*\ HTTP/ [NC,OR]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*\?\=?(http|ftp|ssl|https):/.*\ HTTP/ [NC,OR]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*\?\?.*\ HTTP/ [NC,OR]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*\.(asp|ini|dll).*\ HTTP/ [NC,OR]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*\.(htpasswd|htaccess|aahtpasswd).*\ HTTP/ [NC]
RewriteRule .* - [F,NS,L]

Stop Hotlinking

Denies any request for static files (images, css, etc) if referrer is not local site or empty. [403]

RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteCond %{HTTP_REFERER} !^http://www.askapache.com.*$ [NC]
RewriteRule \.(ico|pdf|flv|jpg|jpeg|mp3|mpg|mp4|mov|wav|wmv|png|gif|swf|css|js)$ - [F,NS,L]

Safe Request Methods

Denies any request not using GET,PROPFIND,POST,OPTIONS,PUT,HEAD[403]

RewriteCond %{REQUEST_METHOD} !^(GET|HEAD|POST|PROPFIND|OPTIONS|PUT)$ [NC]
RewriteRule .* - [F,NS,L]

Forbid Proxies

Denies any POST Request using a Proxy Server. Can still access site, but not comment. See Perishable Press [403]

RewriteCond %{REQUEST_METHOD} =POST
RewriteCond %{HTTP:VIA}%{HTTP:FORWARDED}%{HTTP:USERAGENT_VIA}%{HTTP:X_FORWARDED_FOR}%{HTTP:PROXY_CONNECTION} !^$ [OR]
RewriteCond %{HTTP:XPROXY_CONNECTION}%{HTTP:HTTP_PC_REMOTE_ADDR}%{HTTP:HTTP_CLIENT_IP} !^$
RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteRule .* - [F,NS,L]

Real wp-comments-post.php

Denies any POST attempt made to a non-existing wp-comments-post.php[403]

RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*/wp-comments-post\.php.*\ HTTP/ [NC]
RewriteRule .* - [F,NS,L]

HTTP PROTOCOL

Denies any badly formed HTTP PROTOCOL in the request, 0.9, 1.0, and 1.1 only[403]

RewriteCond %{THE_REQUEST} !^[A-Z]{3,9}\ .+\ HTTP/(0\.9|1\.0|1\.1) [NC]
RewriteRule .* - [F,NS,L]

SPECIFY CHARACTERS

Denies any request for a url containing characters other than "a-zA-Z0-9.+/-?=&" - REALLY helps but may break your site depending on your links. [403]

RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteCond %{THE_REQUEST} !^[A-Z]{3,9}\ [a-zA-Z0-9\.\+_/\-\?\=\&]+\ HTTP/ [NC]
RewriteRule .* - [F,NS,L]

BAD Content Length

Denies any POST request that doesnt have a Content-Length Header[403]

RewriteCond %{REQUEST_METHOD} =POST
RewriteCond %{HTTP:Content-Length} ^$
RewriteCond %{REQUEST_URI} !^/(wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteRule .* - [F,NS,L]

BAD Content Type

Denies any POST request with a content type other than application/x-www-form-urlencoded|multipart/form-data[403]

RewriteCond %{REQUEST_METHOD} =POST
RewriteCond %{HTTP:Content-Type} !^(application/x-www-form-urlencoded|multipart/form-data.*(boundary.*)?)$ [NC]
RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteRule .* - [F,NS,L]

Missing HTTP_HOST

Denies requests that dont contain a HTTP HOST Header.[403]

RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteCond %{HTTP_HOST} ^$
RewriteRule .* - [F,NS,L]

Bogus Graphics Exploit

Denies obvious exploit using bogus graphics[403]

RewriteCond %{HTTP:Content-Disposition} \.php [NC]
RewriteCond %{HTTP:Content-Type} image/.+ [NC]
RewriteRule .* - [F,NS,L]

No UserAgent, Not POST

Denies POST requests by blank user-agents. May prevent a small number of visitors from POSTING. [403]

RewriteCond %{REQUEST_METHOD} =POST
RewriteCond %{HTTP_USER_AGENT} ^-?$
RewriteCond %{REQUEST_URI} !^/(wp-login.php|wp-admin/|wp-content/plugins/|wp-includes/).* [NC]
RewriteRule .* - [F,NS,L]

No Referer, No Comment

Denies any comment attempt with a blank HTTP_REFERER field, highly indicative of spam. May prevent some visitors from POSTING. [403]

RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.*/wp-comments-post\.php.*\ HTTP/ [NC]
RewriteCond %{HTTP_REFERER} ^-?$
RewriteRule .* - [F,NS,L]

Trackback Spam

Denies obvious trackback spam. See Holy Shmoly! [403]

RewriteCond %{REQUEST_METHOD} =POST
RewriteCond %{HTTP_USER_AGENT} ^.*(opera|mozilla|firefox|msie|safari).*$ [NC]
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /.+/trackback/?\ HTTP/ [NC]
RewriteRule .* - [F,NS,L]

Map all URIs except those corresponding to existing files to a handler

RewriteEngine On
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-d
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} !-f
RewriteRule . /script.php

Map any request to a handler

In the case where all URIs should be sent to the same place (including potentially requests for static content) the method to use depends on the type of the handler. For php scripts, use: For other handlers such as php scripts, use:

RewriteEngine On
RewriteCond %{REQUEST_URI} !=/script.php
RewriteRule .* /script.php

And for CGI scripts:

ScriptAliasMatch .* /var/www/script.cgi

Map URIs corresponding to existing files to a handler instead

RewriteEngine On
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -d [OR]
RewriteCond %{DOCUMENT_ROOT}%{REQUEST_URI} -f
RewriteCond %{REQUEST_URI} !=/script.php
RewriteRule .* /script.php

If the existing files you wish to have handled by your script have a common set of file extensions distinct from that of the hander, you can bypass mod_rewrite and use instead mod_actions. Let's say you want all .html and .tpl files to be dealt with by your script:

Action foo-action /script.php
AddHandler foo-action html tpl

Deny access if var=val contains the string foo.

RewriteCond %{QUERY_STRING} foo
RewriteRule ^/url - [F]

Removing the Query String

RewriteRule ^/url /url?

Adding to the Query String

Keep the existing query string using the Query String Append flag, but add var=val to the end.

RewriteRule ^/url /url?var=val [QSA]

Rewriting For Certain Query Strings

Rewrite URLs like http://askapache.com/url1?var=val to http://askapache.com/url2?var=val but don't rewrite if val isn't present.

RewriteCond %{QUERY_STRING} val
RewriteRule ^/url1 /url2

Modifying the Query String

Change any single instance of val in the query string to other_val when accessing /path. Note that %1 and %2 are back-references to the matched part of the regular expression in the previous RewriteCond.

RewriteCond %{QUERY_STRING} ^(.*)val(.*)$
RewriteRule /path /path?%1other_val%2

Best .htaccess Articles

.htaccess for Webmasters

• Process certain requests for files using a cgi script
• Process Requests with certain Request Methods
• Make any file be a certain filetype
• Use IfModule directive for robust code

Mod_Rewrite URL Rewriting

Undocumented techniques and methods will allow you to utilize mod_rewrite at an "expert level" by showing you how to unlock its secrets.

• Check for a key in QUERY_STRING
• Block access to files during certain hours of the day
• Rewrite underscores to hyphens for SEO URL
• Redirecting WordPress Feeds to Feedburner

301 Redirects without mod_rewrite

• Redirect single url
• Redirect to new Domain

Secure PHP with .htaccess

If you have a php.cgi or php.ini file in your /cgi-bin/ directory or other pub directory, try requesting them from your web browser. If your php.ini shows up or worse you are able to execute your php cgi, you'll need to secure it ASAP. This shows several ways to secure these files, and other interpreters like perl, fastCGI, bash, csh, etc.

.htaccess Cookie Manipulation

Fresh .htaccess code for you! Check out the Cookie Manipulation and environment variable usage with mod_rewrite! I also included a couple Mod_Security .htaccess examples. Enjoy!

• Mod_Rewrite .htaccess Examples
• Cookie Manipulation and Tests with mod_rewrite
• Setting Environment Variables
• Using the Environment Variable
• Mod_Security .htaccess Examples

.htaccess Caching

• Speed Up Sites with htaccess Caching
• htaccess time cheat sheet

Password Protection and Authentication

• Require password for single file
• Example .htaccess file for password protection

Control HTTP Headers

• Prevent Caching 100%
• Remove IE imagetoolbar without meta tag
• Add Privacy (P3P) Header to your site
• Add language and charset headers without meta tags

Blocking Spam and bad Bots

Want to block a bad robot or web scraper using .htaccess files? Here are 2 methods that illustrate blocking 436 various user-agents. You can block them using either SetEnvIf methods, or by using Rewrite Blocks.

PHP htaccess tips

By using some cool .htaccess tricks we can control PHP to be run as a cgi or a module. If php is run as a cgi then we need to compile it ourselves or use .htaccess to force php to use a local php.ini file. If it is running as a module then we can use various directives supplied by that modules in .htaccess

• When php run as CGI
• Use a custom php.ini with mod_php or php as a cgi
• When php run as Apache Module (mod_php)
• When cgi php is run with wrapper (FastCGI)

HTTP to HTTPS Redirects with mod_rewrite

This is freaking sweet if you use SSL I promise you! Basically instead of having to check for HTTPS using a RewriteCond %{HTTPS} =on for every redirect that can be either HTTP or HTTPS, I set an environment variable once with the value "http" or "https" if HTTP or HTTPS is being used for that request, and use that env variable in the RewriteRule.

SSL in .htaccess

• Redirect non-https requests to https server
• Rewrite non-https to HTTPS without mod_ssl!
• Redirect everything served on port 80 to HTTPS URI

SetEnvIf and SetEnvIfNoCase in .htaccess

• Unique mod_setenvif Variables
• Populates HTTP_MY_ Variables with mod_setenvif variable values
• Allows only if HOST Header is present in request
• Add values from HTTP Headers

Site Security with .htaccess

chmod .htpasswd files 640, chmod .htaccess 644, php files 600, and chmod files that you really dont want people to see as 400. (NEVER chmod 777, try 766)

• CHMOD your files
• Prevent access to .htaccess and .htpasswd files
• Show Source Code instead of executing
• Securing directories: Remove ability to execute scripts
• .htaccess ErrorDocuments

.htaccess Security with MOD_SECURITY

• mod_security + mod_rewrite
• Block Spam by examining POST form fields
• Disabling mod_security conditionally per IP
• Disabling mod_security with .htaccess Authorization
• Block WordPress Spam Forever!
• Force Any Connections to be Paused a set number of ms
• ModSecurity Debugging and Logging
• Turn Off/On Logging JUST for your IP Address
• Mod_Security Directives for DreamHost
• Example httpd.conf mod_security rule files

Merging Notes

The order of merging is:

1. <Directory> (except regular expressions) and .htaccess done simultaneously (with .htaccess, if allowed, overriding <Directory>)
2. <DirectoryMatch> (and <Directory ~>)
3. <Files> and <FilesMatch> done simultaneously
4. <Location> and <LocationMatch> done simultaneously

Below is an artificial example to show the order of merging. Assuming they all apply to the request, the directives in this example will be applied in the order:

A > B > C > D > E

<Location />
E
</Location>
<Files askapache.txt>
D
</Files>
<VirtualHost *>
<Directory /a/b>
B
</Directory>
</VirtualHost>
<DirectoryMatch "^.*b$">
C
</DirectoryMatch>
<Directory /a/b>
A
</Directory>

My Favorite .htaccess Links

These are just some of my favorite .htaccess resources. I'm really into doing your own hacking to get knowledge and these links are all great resources in that respect. I'm really interested in new or unusual htaccess solutions or htaccess hacks using .htaccess files, so let me know if you find one.

NCSA HTTPd Tutorials

Robert Hansen
Here's a great Hardening HTAccess part 1, part 2, part 3 article that goes into detail about some of the rarer security applications for .htaccess files.

SAMAXES
Some very detailed and helpful .htaccess articles, such as the ".htaccess - gzip and cache your site for faster loading and bandwidth saving."

PerishablePress
Stupid .htaccess tricks is probably the best explanation online for many of the best .htaccess solutions, including many from this page. Unlike me they are fantastic writers, even for technical stuff they are very readable, so its a good blog to kick back on and read. They also have a fantastic article detailing how to block/deny specific requests using mod_rewrite.

BlogSecurity
Mostly a site for... blog security (which is really any web-app security) this blog has a few really impressive articles full of solid information for Hardening WordPress with .htaccess among more advanced topics that can be challenging but effective. This is a good site to subscribe to their feed, they publish plugin exploits and wordpress core vulnerabilities quite a bit.

Check-These
Oldschool security/unix dude with some incredibly detailed mod_rewrite tutorials, helped me the most when I first got into this, and a great guy too. See: Basic Mod_Rewrite Guide, and Advanced Mod_Rewrite Tutorial

Reaper-X
Alot of .htaccess tutorials and code. See: Hardening WordPress with Mod Rewrite and htaccess

jdMorgan
jdMorgan is the Moderator of the Apache Forum at WebmasterWorld, a great place for answers. In my experience he can answer any tough question pertaining to advanced .htaccess usage, haven't seen him stumped yet.

The W3C
Setting Charset in .htaccess is very informative.

Holy Shmoly!
A great blogger with analysis of attacks and spam. See: More ways to stop spammers and unwanted traffic.

Apache Week
A partnership with Red Hat back in the 90's that produced some excellent documentation.

Corz
Here's a resource that I consider to have some of the most creative and ingenious ideas for .htaccess files, although the author is somewhat of a character ;) Its a trip trying to navigate around the site, a fun trip. Its like nothing I've ever seen. There are only a few articles on the site, but the htaccess articles are very original and well-worth a look. See: htaccess tricks and tips.

Htaccess Directives

This is an AskApache.com exclusive you won't find this anywhere else.

Directory, DirectoryMatch, Files, FilesMatch, IfDefine, IfVersion, IfModule, Limit, LimitExcept, Location, LocationMatch, Proxy, ProxyMatch, VirtualHost, AcceptMutex, AcceptPathInfo, AccessFileName, Action, AddCharset, AddDefaultCharset, AddDescription, AddEncoding, AddHandler, AddInputFilter, AddLanguage, AddOutputFilter, AddOutputFilterByType, AddType, Alias, AliasMatch, AllowCONNECT, AllowOverride, Anonymous, Anonymous_Authoritative, Anonymous_LogEmail, Anonymous_MustGiveEmail, Anonymous_NoUserId, Anonymous_VerifyEmail, AuthAuthoritative, AuthDBMAuthoritative, AuthDBMGroupFile, AuthDBMType, AuthDBMUserFile, AuthDigestAlgorithm, AuthDigestDomain, AuthDigestFile, AuthDigestGroupFile, AuthDigestNcCheck, AuthDigestNonceFormat, AuthDigestNonceLifetime, AuthDigestQop, AuthDigestShmemSize, AuthGroupFile, AuthName, AuthType, AuthUserFile, BS2000Account, BrowserMatch, BrowserMatchNoCase, CacheNegotiatedDocs, CharsetDefault, CharsetOptions, CharsetSourceEnc, CheckSpelling, ContentDigest, CookieDomain, CookieExpires, CookieName, CookieStyle, CookieTracking, CoreDumpDirectory, DAV, DAVDepthInfinity, DAVMinTimeout, DefaultIcon, DefaultLanguage, DefaultType, DocumentRoot, ErrorDocument, ErrorLog, ExtFilterDefine, ExtFilterOptions, FancyIndexing, FileETag, ForceLanguagePriority, ForceType, GprofDir, Header, HeaderName, HostnameLookups, IdentityCheck, ImapBase, ImapDefault, ImapMenu, Include, IndexIgnore, LanguagePriority, LimitRequestBody, LimitRequestFields, LimitRequestFieldsize, LimitRequestLine, LimitXMLRequestBody, LockFile, LogLevel, MaxRequestsPerChild, MultiviewsMatch, NameVirtualHost, NoProxy, Options, PassEnv, PidFile, Port, ProxyBlock, ProxyDomain, ProxyErrorOverride, ProxyIOBufferSize, ProxyMaxForwards, ProxyPass, ProxyPassReverse, ProxyPreserveHost, ProxyReceiveBufferSize, ProxyRemote, ProxyRemoteMatch, ProxyRequests, ProxyTimeout, ProxyVia, RLimitCPU, RLimitMEM, RLimitNPROC, ReadmeName, Redirect, RedirectMatch, RedirectPermanent, RedirectTemp, RemoveCharset, RemoveEncoding, RemoveHandler, RemoveInputFilter, RemoveLanguage, RemoveOutputFilter, RemoveType, RequestHeader, Require, RewriteCond, RewriteRule, SSIEndTag, SSIErrorMsg, SSIStartTag, SSITimeFormat, SSIUndefinedEcho, Satisfy, ScoreBoardFile, Script, ScriptAlias, ScriptAliasMatch, ScriptInterpreterSource, ServerAdmin, ServerAlias, ServerName, ServerPath, ServerRoot, ServerSignature, ServerTokens, SetEnv, SetEnvIf, SetEnvIfNoCase, SetHandler, SetInputFilter, SetOutputFilter, Timeout, TypesConfig, UnsetEnv, UseCanonicalName, XBitHack, allow, deny, order, CGIMapExtension, EnableMMAP, ISAPIAppendLogToErrors, ISAPIAppendLogToQuery, ISAPICacheFile, ISAPIFakeAsync, ISAPILogNotSupported, ISAPIReadAheadBuffer, SSLLog, SSLLogLevel, MaxMemFree, ModMimeUsePathInfo, EnableSendfile, ProxyBadHeader, AllowEncodedSlashes, LimitInternalRecursion, EnableExceptionHook, TraceEnable, ProxyFtpDirCharset, AuthBasicAuthoritative, AuthBasicProvider, AuthDefaultAuthoritative, AuthDigestProvider, AuthLDAPAuthzEnabled, AuthLDAPBindDN, AuthLDAPBindPassword, AuthLDAPCharsetConfig, AuthLDAPCompareDNOnServer, AuthLDAPDereferenceAliases, AuthLDAPGroupAttribute, AuthLDAPGroupAttributeIsDN, AuthLDAPRemoteUserIsDN, AuthLDAPURL, AuthzDBMAuthoritative, AuthzDBMType, AuthzDefaultAuthoritative, AuthzGroupFileAuthoritative, AuthzLDAPAuthoritative, AuthzOwnerAuthoritative, AuthzUserAuthoritative, BalancerMember, DAVGenericLockDB, FilterChain, FilterDeclare, FilterProtocol, FilterProvider, FilterTrace, IdentityCheckTimeout, IndexStyleSheet, ProxyPassReverseCookieDomain, ProxyPassReverseCookiePath, ProxySet, ProxyStatus, ThreadStackSize, AcceptFilter, Protocol, AuthDBDUserPWQuery, AuthDBDUserRealmQuery, UseCanonicalPhysicalPort, CheckCaseOnly, AuthLDAPRemoteUserAttribute, ProxyPassMatch, SSIAccessEnable, Substitute, ProxyPassInterpolateEnv

Htaccess Modules

Here are most of the modules that come with Apache. Each one can have new commands that can be used in .htaccess file scopes.

mod_actions, mod_alias, mod_asis, mod_auth_basic, mod_auth_digest, mod_authn_anon, mod_authn_dbd, mod_authn_dbm, mod_authn_default, mod_authn_file, mod_authz_dbm, mod_authz_default, mod_authz_groupfile, mod_authz_host, mod_authz_owner, mod_authz_user, mod_autoindex, mod_cache, mod_cern_meta, mod_cgi, mod_dav, mod_dav_fs, mod_dbd, mod_deflate, mod_dir, mod_disk_cache, mod_dumpio, mod_env, mod_expires, mod_ext_filter, mod_file_cache, mod_filter, mod_headers, mod_ident, mod_imagemap, mod_include, mod_info, mod_log_config, mod_log_forensic, mod_logio, mod_mem_cache, mod_mime, mod_mime_magic, mod_negotiation, mod_proxy, mod_proxy_ajp, mod_proxy_balancer, mod_proxy_connect, mod_proxy_ftp, mod_proxy_http, mod_rewrite, mod_setenvif, mod_speling, mod_ssl, mod_status, mod_substitute, mod_unique_id, mod_userdir, mod_usertrack, mod_version, mod_vhost_alias

Htaccess Software

Apache HTTP Server comes with the following programs.

httpd

Apache hypertext transfer protocol server

apachectl

Apache HTTP server control interface

ab

Apache HTTP server benchmarking tool

apxs

APache eXtenSion tool

dbmmanage

Create and update user authentication files in DBM format for basic authentication

fcgistarter

Start a FastCGI program

htcacheclean

Clean up the disk cache

htdigest

Create and update user authentication files for digest authentication

htdbm

Manipulate DBM password databases.

htpasswd

Create and update user authentication files for basic authentication

httxt2dbm

Create dbm files for use with RewriteMap

logresolve

Resolve hostnames for IP-addresses in Apache logfiles

log_server_status

Periodically log the server's status

rotatelogs

Rotate Apache logs without having to kill the server

split-logfile

Split a multi-vhost logfile into per-host logfiles

suexec

Switch User For Exec

Technical Look at .htaccess

Source: Apache API notes

Per-directory configuration structures

Let's look out how all of this plays out in mod_mime.c, which defines the file typing handler which emulates the NCSA server's behavior of determining file types from suffixes. What we'll be looking at, here, is the code which implements the AddType and AddEncoding commands. These commands can appear in .htaccess files, so they must be handled in the module's private per-directory data, which in fact, consists of two separate tables for MIME types and encoding information, and is declared as follows:

table *forced_types;      /* Additional AddTyped stuff */
table *encoding_types;    /* Added with AddEncoding... */
mime_dir_config;

When the server is reading a configuration file, or <Directory> section, which includes one of the MIME module's commands, it needs to create a mime_dir_config structure, so those commands have something to act on. It does this by invoking the function it finds in the module's `create per-dir config slot', with two arguments: the name of the directory to which this configuration information applies (or NULL for srm.conf), and a pointer to a resource pool in which the allocation should happen.

(If we are reading a .htaccess file, that resource pool is the per-request resource pool for the request; otherwise it is a resource pool which is used for configuration data, and cleared on restarts. Either way, it is important for the structure being created to vanish when the pool is cleared, by registering a cleanup on the pool if necessary).

For the MIME module, the per-dir config creation function just ap_pallocs the structure above, and a creates a couple of tables to fill it. That looks like this:

void *create_mime_dir_config (pool *p, char *dummy)
mime_dir_config *new = (mime_dir_config *) ap_palloc (p, sizeof(mime_dir_config));
 
new->forced_types = ap_make_table (p, 4);
new->encoding_types = ap_make_table (p, 4);

Now, suppose we've just read in a .htaccess file. We already have the per-directory configuration structure for the next directory up in the hierarchy. If the .htaccess file we just read in didn't have any AddType or AddEncoding commands, its per-directory config structure for the MIME module is still valid, and we can just use it. Otherwise, we need to merge the two structures somehow.

To do that, the server invokes the module's per-directory config merge function, if one is present. That function takes three arguments: the two structures being merged, and a resource pool in which to allocate the result. For the MIME module, all that needs to be done is overlay the tables from the new per-directory config structure with those from the parent:

void *merge_mime_dir_configs (pool *p, void *parent_dirv, void *subdirv)
mime_dir_config *parent_dir = (mime_dir_config *)parent_dirv;
mime_dir_config *subdir = (mime_dir_config *)subdirv;
mime_dir_config *new =  (mime_dir_config *)ap_palloc (p, sizeof(mime_dir_config));
new->forced_types = ap_overlay_tables (p, subdir->forced_types, parent_dir->forced_types);
new->encoding_types = ap_overlay_tables (p, subdir->encoding_types, parent_dir->encoding_types);

As a note --- if there is no per-directory merge function present, the server will just use the subdirectory's configuration info, and ignore the parent's. For some modules, that works just fine (e.g., for the includes module, whose per-directory configuration information consists solely of the state of the XBITHACK), and for those modules, you can just not declare one, and leave the corresponding structure slot in the module itself NULL.

Command handling

Now that we have these structures, we need to be able to figure out how to fill them. That involves processing the actual AddType and AddEncoding commands. To find commands, the server looks in the module's command table. That table contains information on how many arguments the commands take, and in what formats, where it is permitted, and so forth. That information is sufficient to allow the server to invoke most command-handling functions with pre-parsed arguments. Without further ado, let's look at the AddType command handler, which looks like this (the AddEncoding command looks basically the same, and won't be shown here):

char *add_type(cmd_parms *cmd, mime_dir_config *m, char *ct, char *ext)
if (*ext == '.') ++ext;
ap_table_set (m->forced_types, ext, ct);

This command handler is unusually simple. As you can see, it takes four arguments, two of which are pre-parsed arguments, the third being the per-directory configuration structure for the module in question, and the fourth being a pointer to a cmd_parms structure. That structure contains a bunch of arguments which are frequently of use to some, but not all, commands, including a resource pool (from which memory can be allocated, and to which cleanups should be tied), and the (virtual) server being configured, from which the module's per-server configuration data can be obtained if required.

Another way in which this particular command handler is unusually simple is that there are no error conditions which it can encounter. If there were, it could return an error message instead of NULL; this causes an error to be printed out on the server's stderr, followed by a quick exit, if it is in the main config files; for a .htaccess file, the syntax error is logged in the server error log (along with an indication of where it came from), and the request is bounced with a server error response (HTTP error status, code 500).

The MIME module's command table has entries for these commands, which look like this:

command_rec mime_cmds[] =
{ "AddType", add_type, NULL, OR_FILEINFO, TAKE2, "a mime type followed by a file extension" },
{ "AddEncoding", add_encoding, NULL, OR_FILEINFO, TAKE2, "an encoding (e.g., gzip), followed by a file extension" },

The entries in these tables are:

• The name of the command
• The function which handles it a (void *) pointer, which is passed in the cmd_parms structure to the command handler --- this is useful in case many similar commands are handled by the same function.
• A bit mask indicating where the command may appear. There are mask bits corresponding to each AllowOverride option, and an additional mask bit, RSRC_CONF, indicating that the command may appear in the server's own config files, but not in any .htaccess file.
• A flag indicating how many arguments the command handler wants pre-parsed, and how they should be passed in. TAKE2 indicates two pre-parsed arguments. Other options are TAKE1, which indicates one pre-parsed argument, FLAG, which indicates that the argument should be On or Off, and is passed in as a boolean flag, RAW_ARGS, which causes the server to give the command the raw, unparsed arguments (everything but the command name itself). There is also ITERATE, which means that the handler looks the same as TAKE1, but that if multiple arguments are present, it should be called multiple times, and finally ITERATE2, which indicates that the command handler looks like a TAKE2, but if more arguments are present, then it should be called multiple times, holding the first argument constant.
• Finally, we have a string which describes the arguments that should be present. If the arguments in the actual config file are not as required, this string will be used to help give a more specific error message. (You can safely leave this NULL).

Finally, having set this all up, we have to use it. This is ultimately done in the module's handlers, specifically for its file-typing handler, which looks more or less like this; note that the per-directory configuration structure is extracted from the request_rec's per-directory configuration vector by using the ap_get_module_config function.

Side notes --- per-server configuration, virtual servers, etc.

The basic ideas behind per-server module configuration are basically the same as those for per-directory configuration; there is a creation function and a merge function, the latter being invoked where a virtual server has partially overridden the base server configuration, and a combined structure must be computed. (As with per-directory configuration, the default if no merge function is specified, and a module is configured in some virtual server, is that the base configuration is simply ignored).

The only substantial difference is that when a command needs to configure the per-server private module data, it needs to go to the cmd_parms data to get at it. Here's an example, from the alias module, which also indicates how a syntax error can be returned (note that the per-directory configuration argument to the command handler is declared as a dummy, since the module doesn't actually have per-directory config data):

Continue Reading Page 2

THE Ultimate Htaccess originally appeared on AskApache.com