AskApache » Search Results » bandwidth http://www.askapache.com Advanced Web Development Thu, 26 Apr 2012 11:29:28 +0000 en-US hourly 1 HOWTO: Uninstall CPANEL over SSH http://www.askapache.com/hacking/uninstall-cpanel.html http://www.askapache.com/hacking/uninstall-cpanel.html#comments Mon, 04 Jul 2011 18:55:40 +0000 AskApache http://www.askapache.com/?p=4404 The following is just a quick reference of some of the commands I used to successfully uninstall cpanel. This is for advanced users of the shell. If you aren't that advanced and you run a single one of these commands without fully understanding it, you will probably kill your server, probably lose everything on it permanently, probably not have a website or email for weeks.. So backup all your data FIRST. Also, if you aren't 100% sure you won't run into problems, you should contact your hosts technical support - but be prepared for some MAJOR negativity.. cpanel makes things very easy for hosts, you are just a drop in their bucket.

Wow!

You sure gotta bigger set that *I* do. . . . - for real! I've been known to do some abysmally stupid things in my day - and actually had them work the way I wanted them to! - but this takes the titanium, gadolinium, rhodium alloy cake!

Me, I'd try something like that and find out later that the fire-trucks showed up right after I hit the "Enter" key. It's a REALLY interesting post, and a real eye-opener - especially for someone who is relatively new to the whole web-hosting-service paradigm. I know, no guts, no glory - but THIS is WAY over the top! I'm reading this and thinking "Why not just put a couple of sticks of dynamite under the thing?"

Seriously now, this was an excellent read - and for someone who is just now looking into the whole web-hosting paradigm, it's a real eye-opener. Though I think I'll just tiptoe past this REAL QUIETLY for now. . . . (laughing!)

Jim

]]> AskApache.com

WARNING! This is for advanced users of the shell, this is NOT a howto or tutorial. The thing is, I googled how to uninstall cpanel and for once in my life I came up empty.. And certainly the cpanel official sites themselves don't provide any instructions other than to say "Dont uninstall it, reinstall your entire operating system without it.".. they sure don't seem confident that they know exactly what their code is doing. Cpanel is great for most people, perfect for many situations, so don't get me wrong.. this is just for fun.

Why Uninstall?

Why? Because I have always built my servers, php installations, perl installs, ruby, iptables, everything from source. I read the INSTALL/README docs, I read the man pages, and I read the info pages as well. I google for configuration advice, I google for tips, and I don't need a web-based perl script messing my stuff up!

The main problems I had with cpanel, which really is a great bit of software for millions of website developers, is that it was incredibly sneaky! I used it for about 6 months and spent that entire time trying to figure out what the heck it was doing. A couple issues that I really disliked, it takes over your bind install, it takes over your apache install, it takes over your php install. And although it does let you configure some things (very few) for custom configurations and the like, I just don't need any of that. By removing the darn thing I am saving GIGS of space on my server, tons of bandwidth, and most importantly to me I am saving CPU and processing time along with RAM and IO speed.

Anything Else

Please.. I could go on for DAYS! Another reason I have wanted to be rid of cpanel is that I like my servers to be as lean and mean as possible. This means I like as few files and processes as possible. There are many benefits to this, like it's much easier for my integrity checking software and rootkit/antivirus software to run and drastically reduces the false positives. And there is that glaring security issue of constantly having cpanel run it's own software to create the WHM/Cpanel web interface, which is accessible online. I haven't researched cpanel security at all, it's possible that it never has security problems that are published, but for me, why take the chance?

Warning - Caution!

The following is just a quick reference of some of the commands I used to uninstall cpanel. This is for advanced users of the shell. If you aren't that advanced and you run a single one of these commands without fully understanding it, you will probably kill your server, probably lose everything on it permanently, probably not have a website or email for weeks.. So backup all your data FIRST. Also, if you aren't 100% sure you won't run into problems, you should contact your hosts technical support - but be prepared for some MAJOR negativity.. cpanel makes things very easy for hosts, and the last thing tech support wants is to fix a server broken by someone who doesn't know what they are doing.

Last Warning!

Unless you understand what theses commands do and the purpose they serve, do not try any of this. These are not the exact commands I used verbatim, they are also not in order. I only put them up here because I was so amazed that google didn't have any uninstall cpanel intructions. Hopefully it's not a conspiracy that will get my site taken down.. ;)

That said and out of the way, it really only took me about 10 minutes to uninstall cpanel completely. But keep in mind I have been closely monitoring and debugging cpanel for 6 months, so I knew what I was doing. And finally, I do apologize for not having better instructions.. but hey, if you don't get this then you have no business trying to figure out how to uninstall cpanel! It's great software and shouldn't be removed unless you are fully capable of managing email/dns/www/ftp and any/all other servers and services on your machine by hand.

Do This First

I have a few drafts I'm working on at the moment with specifics, but for now you will have to figure it out with google. Basically you want to make sure you don't totally knock your machine offline without being able to reconnect. What I do is compile a static version of openssh and a few other security-type shell tools, and configure this binary sshd to run by using inittab, which is the file run by init (pid 1) and makes sure if it dies it is restarted. Here is my /etc/inittab to run the static sshd binary:

hh:12345:respawn:/failover/os/sbin/aassh -D -q -u0 -f /failover/os/etc/aassh

Another trick is to keep a detached screen logged in to root. That way if you mess up your sudoers or securetty or pam or whatever, you can just reattach and fix it.

Finally, you may want to setup your syslog to start earlier than usual, and set up more than normal verbosity. ( I take it to the max ). Then you should setup a 2nd server or machine somewhere to act as a syslog server. Lastly, configure your web server syslog to copy all messages to the remote syslog you set up. I use a reverse ssh tunnel to encrypt the syslog packets, but when I do something serious like reboot after uninstalling cpanel, I prepare for it by adding additional networking routes on my machine to make sure I will get some logs even if sshd cant start or even if my network addresses aren't brought up correctly.

If that sounds easy to you, please continue. If you are saying: Wha??? Continue in read-only mode.

Also, you can't just uninstall cpanel, I have replaced a lot of cpanel already, like building my own bind, apache, php, syslog and making sure they work and aren't being tampered with by cpanel. Basically cpanel runs everything on your server in most cases, so you should prepare by creating your own static software to replace cpanel, and make sure it works.

Find files Accessing /var/cpanel

More than likely these will need to be killed.

lsof +w -Rg -nP +c15 -x f +D /var/cpanel
lsof +w -Rg -nP +c15 -x f +D /usr/local/cpanel

Killing cpanel

Just an example, your machine may have a lot more than these, I have been slowly taking control of my machine back from cpanel for 6 months, so it was easier for me.

for P in tailwatchd queueprocd cpanellogd exim; do pkill -9 $P; done

Commands and Shortcuts

alias NF='nice find $PWD -mount -depth ! -type d'
alias NFF='nice find $PWD -mount -depth ! -type d | xargs -IF87 file F87'
alias NA='nice find $PWD -mount -depth'
alias NAF='nice find $PWD -mount -depth | xargs -IF87 file F87'

Watch out for crontab

An example of the sneakiness (from my POV, from most it's called builtin robustness) that cpanel does is automagically adding crontab entries that make it behave similarly to a self-propagating virus. If you don't disable the cronjobs and kill the right processes within a short period of time, be prepared for a magic resurrection.

Here's my awesome crontab information function, you will need to check every file, it lists the default crons on my box, and every users crontab, but it can't account for other cron software like at and other crons.

function askapache_crontab()
{
  local GG i;
  for i in `getent passwd|cut -d ":" -f1`;
  do
    GG=$(sudo crontab -u $i -l 2>$N6 | tr -s '\n\000' | sed '/^#/d');
    [[ ${#GG} -gt 3 ]] && sleep 1 && echo -e "$i \n\n${GG}"
  done;
   sleep 4;
   ls -aLls1ch --color=always /etc/cron.{hourly,daily,weekly,monthly,d} | sed '/^total/d; /\ drwxr-xr-x/d';
}
grep -ir /var/spool cpan
#6 3 * * * /scripts/upcp
#0 1 * * * /scripts/cpbackup
#0 2 * * * /scripts/mailman_chown_archives
#35 * * * * /usr/bin/test -x /usr/local/cpanel/bin/tail-check && /usr/local/cpanel/bin/tail-check
#11,26,41,56 * * * * /usr/local/cpanel/whostmgr/bin/dnsqueue > /dev/null 2>&1
#30 */4 * * * /usr/bin/test -x /scripts/update_db_cache && /scripts/update_db_cache
#45 */8 * * * /usr/bin/test -x /usr/local/cpanel/bin/optimizefs && /usr/local/cpanel/bin/optimizefs
#*/5 * * * * /usr/local/cpanel/bin/dcpumon >/dev/null 2>&1
#25 1 * * * /usr/local/cpanel/whostmgr/docroot/cgi/cpaddons_report.pl --notify

Delete Crontabs

sudo crontab -u mailman -r

Find INIT scripts with cpanel

This is the main startup script: /usr/local/cpanel/etc/init/startup

I had no idea ruby-on-rails was being controlled by cpanel.. sneaky bugger. You can tell by all of these advanced unix commands just how difficult it would be to uninstall cpanel, its totally like the Alien!

(1:3744)# find . ! -type d -print0|xargs -0 -I'F87' grep -Hi "cpan\|tailwat\|chkser" F87
./fastmail:# Author:       cPanel, Inc. <nick@cpanel.net>
./httpd:        HTTPD=/usr/local/cpanel/bin/chroothttpd
./cpanel:# cpanel8       Start Cpanel Services
./cpanel:# Author:       cPanel, Inc. <nick@cpanel.net>
./cpanel:# description: This is the cpanel webserver and chat.
./cpanel:# processname: cpaneld
./cpanel:# pidfile: /var/run/cpanel.pid
./cpanel:[ -f /usr/local/cpanel/etc/init/startup ] || exit 0
./cpanel:       if [ -f "/var/cpanel/smtpgidonlytweak" ]; then
./cpanel:       echo -n "Starting cPanel services: "
./cpanel:       daemon /usr/local/cpanel/etc/init/startcpsrvd
./cpanel:       echo -n "Starting cPanel brute force detector services: "
./cpanel:       daemon /usr/local/cpanel/etc/init/startcphulkd
./cpanel:    echo -n "Starting cPanel dav services: "
./cpanel:       daemon /usr/local/cpanel/etc/init/startcpdavd
./cpanel:               daemon /usr/local/cpanel/etc/init/startcppop
./cpanel:       echo -n "Starting cPanel Chat services: "
./cpanel:               daemon /usr/local/cpanel/entropychat/entropychat
./cpanel:               daemon /usr/local/cpanel/bin/startmelange
./cpanel:                       /usr/local/cpanel/bin/startinterchange
./cpanel:       echo -n "Starting cPanel ssl services: "
./cpanel:       daemon /usr/local/cpanel/startstunnel
./cpanel:    echo -n "Starting cPanel Queue services: "
./cpanel:       daemon /usr/local/cpanel/etc/init/startqueueprocd
./cpanel:    echo -n "Starting tailwatchd: "
./cpanel:    daemon /usr/local/cpanel/libexec/tailwatchd --start
./cpanel:       echo -n "Starting cPanel Log services: "
./cpanel:       daemon /usr/local/cpanel/cpanellogd
./cpanel:    action "Starting mailman services: " /usr/local/cpanel/etc/init/startmailman
./cpanel:    action "Stopping tailwatchd: " /usr/local/cpanel/libexec/tailwatchd --stop
./cpanel:    action "Stopping cPanel services: " /usr/local/cpanel/etc/init/stopcpsrvd
./cpanel:       action "Stopping cPanel dav services: " /usr/local/cpanel/etc/init/stopcpdavd
./cpanel:       action "Stopping cPanel queue services: " /usr/local/cpanel/etc/init/stopqueueprocd
./cpanel:       action "Stopping cPanel brute force detector services: " /usr/local/cpanel/etc/init/stopcphulkd
./cpanel:               action "Stopping pop3 services: " /usr/local/cpanel/etc/init/stopcppop
./cpanel:       echo -n "Stopping cPanel log services: "
./cpanel:       killproc cpanellogd
./cpanel:       echo -n "Stopping cPanel Chat services: "
./cpanel:       action "Stopping cPanel ssl services: " /usr/local/cpanel/etc/init/stopstunnel
./cpanel:       action "Stopping mailman services: " /usr/local/cpanel/etc/init/stopmailman
./cpanel:       if [ -e "/usr/local/cpanel/3rdparty/mailman/bin/mailmanctl" ]; then
./exim:if [ -e "/etc/chkserv.d" ]; then
./exim:        for file in `ls /etc/chkserv.d`
./exim:            if [ ! -e "/usr/local/cpanel/libexec/tailwatchd" ]; then
./exim:    if [ -x "/usr/local/cpanel/etc/init/startspamd" ]; then
./exim:        /usr/local/cpanel/etc/init/startspamd
./exim:        if [ ! -e "/usr/local/cpanel/libexec/tailwatchd" ]; then
./ror:  /usr/local/cpanel/bin/rormgr --startboot
./ror:  /usr/local/cpanel/bin/rormgr --stopall
./ror:  /usr/local/cpanel/bin/rormgr --stopall
./ror:  /usr/local/cpanel/bin/rormgr --startboot
./ror:  /usr/local/cpanel/bin/rormgr --statusall
./securetmp:# Author:       cPanel, Inc. <copyright@cpanel.net>

Turn off cpanel services

You should remove the below delete command and start by just disabling the inits by turning them off. Then reboot. Then delete. If your machine won't reboot, I told you so, Cpanel told you so, and likely your host told you so.

for S in cpanel ror securetmp fastmail exim; do R=$(command chkconfig --level 123456 $S off ||echo); R=$(command chkconfig --del $S ||echo); done

HTTPD

If you are running chrooted httpd then you'll need to make sure you don't delete your entire webserver on accident. Here's a relevant part from the /etc/init.d/httpd script.

# the path to your httpd binary, including options if necessary
if [ -e "/etc/chroothttpd" ]; then
        HTTPD=/usr/local/cpanel/bin/chroothttpd
else
        HTTPD=/usr/local/apache/bin/httpd
fi

Finding files owned by cpanel

Some super cool bash commands in this post.. let's start with one to find all the files and folders on your machine owned by cpanel. Check your /etc/passwd file for your machines specific usernames and groups. This command saves all the filenames to ~/cpanel-files-backup.txt, which is used by tar next to create a backup of all of them.

{ find / -mount -depth -maxdepth 150 \( -group cpanel -o   -group cpanel-phpmyadmin -o -group cpanel-phppgadmin   -o -group cpanelphpmyadmin   -o -group cpanelphppgadmin   -o -group cpanelhorde   -o -group cpanelroundcube \) -print; find / -mount -depth -maxdepth 150 \( -user cpanel -o   -user cpanel-phpmyadmin -o -user cpanel-phppgadmin   -o -user cpanelphpmyadmin   -o -user cpanelphppgadmin   -o -user cpanelhorde   -o -user cpanelroundcube \) -print; } > ~/cpanel-files-backup.txt

Here's another way to search directories.

 grep --color=always -Hir cpanel /var

Create the Backup

Note that you must have the latest version of tar for this exact command, also you should backup /var/cpanel and /usr/local/cpanel and /etc and heck the whole machine why dontcha!

tar -T ~/cpanel-files-backup.txt -cvz --checkpoint=1000 --checkpoint-action="ttyout=\rHit %s checkpoint #%u" -f /cpanel-files-backup.tgz --totals

Remove Files

Once you do this your upstream without a paddle, you better make sure you know what you're doing with this. This removes all those files.

cat ~/cpanel-files-backup.txt | xargs -I'F87' rm -vfr F87

Additionally you will want to remove /usr/local/cpanel and /var/cpanel - What I always do when running as root is alias my rm command to instead simply move the files to a .trash folder. That way if something goes bork you have a better chance at fixing it.

Find Group-Owned Files

find / -mount -depth -maxdepth 150 \
\(  -group cpanel -o \
  -group cpanel-phpmyadmin \
  -o -group cpanel-phppgadmin \
  -o -group cpanelphpmyadmin \
  -o -group cpanelphppgadmin \
  -o -group mailman \
  -o -group cpanelhorde \
  -o -group cpanelroundcube \
\) -fprintf /root/cpanel-group-files.log '%#8k %#5m %11M %#10u:%-10g %-5U:%-5G %p %f %Y %F\n'

Find User-Owned Files

find / -mount -depth -maxdepth 150 \(
  -user cpanel \
  -o -user cpanel-phpmyadmin \
  -o -user cpanel-phppgadmin \
  -o -user cpanelphpmyadmin \
  -o -user cpanelphppgadmin \
  -o -user mailman \
  -o -user cpanelhorde \
  -o -user cpanelroundcube
\) -fprintf /root/cpanel-users-files.log '%#8k %#5m %11M %#10u:%-10g %-5U:%-5G %p %f %Y %F\n'
       4  0755  drwxr-xr-x     cpanel:cpanel     32002:32004 /var/cpanel/userhomes/cpanel cpanel d reiserfs
       4  0700  drwx------ cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/tmp tmp d reiserfs
       4  0644  -rw-r--r-- cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/.cpanel/caches/featurelists/default.cache default.cache f reiserfs
       4  0700  drwx------ cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/.cpanel/caches/featurelists featurelists d reiserfs
       4  0700  drwx------ cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/.cpanel/caches caches d reiserfs
       4  0700  drwx------ cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/.cpanel .cpanel d reiserfs
       4  0750  drwxr-x--- cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin/mail mail d reiserfs
       4  0711  drwx--x--x cpanel-phpmyadmin:cpanel-phpmyadmin 32005:32007 /var/cpanel/userhomes/cpanel-phpmyadmin cpanel-phpmyadmin d reiserfs
       4  0700  drwx------ cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/sessions sessions d reiserfs
       4  0644  -rw-r--r-- cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/.cpanel/caches/featurelists/default.cache default.cache f reiserfs
       4  0700  drwx------ cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/.cpanel/caches/featurelists featurelists d reiserfs
       4  0700  drwx------ cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/.cpanel/caches caches d reiserfs
       4  0700  drwx------ cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/.cpanel .cpanel d reiserfs
       4  0750  drwxr-x--- cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin/mail mail d reiserfs
       4  0711  drwx--x--x cpanelphppgadmin:cpanelphppgadmin 32009:32011 /var/cpanel/userhomes/cpanelphppgadmin cpanelphppgadmin d reiserfs
       4  0750  drwxr-x--- cpanelroundcube:cpanelroundcube 514  :514   /var/cpanel/userhomes/cpanelroundcube/mail mail d reiserfs
       4  0700  drwx------ cpanelroundcube:cpanelroundcube 514  :514   /var/cpanel/userhomes/cpanelroundcube/sessions sessions d reiserfs
       4  0711  drwx--x--x cpanelroundcube:cpanelroundcube 514  :514   /var/cpanel/userhomes/cpanelroundcube cpanelroundcube d reiserfs
       4  0644  -rw-r--r--     cpanel:cpanel     32002:32004 /var/cpanel/.cpanel/caches/featurelists/default.cache default.cache f reiserfs
       4  0700  drwx------     cpanel:cpanel     32002:32004 /var/cpanel/.cpanel/caches/featurelists featurelists d reiserfs
       4  0700  drwx------     cpanel:cpanel     32002:32004 /var/cpanel/.cpanel/caches caches d reiserfs
       4  0700  drwx------     cpanel:cpanel     32002:32004 /var/cpanel/.cpanel .cpanel d reiserfs
       4  0700  drwx------ cpanelroundcube:cpanelroundcube 514  :514   /var/cpanel/roundcube/tmp tmp d reiserfs
       4  0700  drwx------ cpanelroundcube:cpanelroundcube 514  :514   /var/cpanel/roundcube/log log d reiserfs

Find Permissions

cat ~/cpanel-group-files.log ~/cpanel-users-files.log |tr -s '\000 \t'|cut -d' ' -f3|sort -u

Find files tailwatchd

(1:3732)# $NICE find ${1:-`pwd`} -mount -name '*tailwatch*'
/usr/local/cpanel/libexec/tailwatchd
/usr/local/cpanel/libexec/tailwatch
/usr/local/cpanel/libexec/tailwatch/tailwatchd
/usr/local/cpanel/etc/init/scripts/freebsd/tailwatchd.sh
/usr/local/cpanel/etc/init/scripts/trustix/tailwatchd
/usr/local/cpanel/etc/init/scripts/centos/tailwatchd
/usr/local/cpanel/etc/init/scripts/suse/tailwatchd
/usr/local/cpanel/etc/init/scripts/caos/tailwatchd
/usr/local/cpanel/etc/init/scripts/whitebox/tailwatchd
/usr/local/cpanel/etc/init/scripts/mandrake/tailwatchd
/usr/local/cpanel/etc/init/scripts/debian/tailwatchd
/usr/local/cpanel/etc/init/scripts/redhat/tailwatchd
/usr/local/cpanel/etc/init/scripts/fedora/tailwatchd
/usr/local/cpanel/etc/init/stoptailwatchd
/usr/local/cpanel/etc/init/starttailwatchd
/usr/local/cpanel/bin/tailwatchd
/usr/local/cpanel/logs/tailwatchd_log
/var/log/cpanel/tailwatchd_log
/var/cpanel/log_rotation/cp_tailwatchd_log.cpanellogd
/var/cpanel/tailwatch.positions
/var/run/tailwatchd.pid
/etc/chkserv.d/tailwatchd
/scripts/restartsrv_tailwatchd

Delete cpanel Users/Groups

for U in cpanel-phpmyadmin cpanel-phppgadmin cpanelphpmyadmin cpanelphppgadmin cpanelhorde cpanelroundcube machbuild; do userdel -fr $U; groupdel $U; done

Check for broken symlinks

find / -mount -depth -type l -print0 |xargs -0 -P0 -I'F87' file -s 'F87' | sed -n '/: broken symbolic link to/p'

Especially check /etc

$ find /etc -mount -depth -type l -print0 |xargs -0 -P0 -I'F87' file -s 'F87' | sed -n '/: broken symbolic link to/p'
/etc/ftpd-rsa.pem                   broken symbolic link to `/var/cpanel/ssl/ftp/ftpd-rsa.pem'
/etc/rc.d/rc1.d/K10chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc1.d/K30antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc1.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc3.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc3.d/S80chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc3.d/S80antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc6.d/K10chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc6.d/K30antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc6.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc5.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc5.d/S80chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc5.d/S80antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc2.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc2.d/S80chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc2.d/S80antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc4.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/rc.d/rc4.d/S80chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc4.d/S80antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc0.d/K10chkservd         broken symbolic link to `../init.d/chkservd'
/etc/rc.d/rc0.d/K30antirelayd       broken symbolic link to `../init.d/antirelayd'
/etc/rc.d/rc0.d/K80dcc              broken symbolic link to `../init.d/dcc'
/etc/authlib/authProg               broken symbolic link to `/usr/local/cpanel/bin/courier-auth'

And delete if you are sure

find /etc -mount -depth -type l -print0 |xargs -0 -P0 -I'F87' file -s 'F87' | sed -n '/: broken symbolic link to/p' |cut -d' ' -f1|xargs -I'F87' rm -rvf 'F87'

Reinstall CSF

The only thing I actually used that came with cpanel is the CSF/LFD Firewall package, which is a fantastic piece of software. I had to reinstall this, and to get it working without cpanel add the following line to the csf.conf

GENERIC = "1"

Thats It

Now once you've cleaned up everything, you should try everything conceivable to get an error before rebooting. Like you should start and stop every service in /etc/init.d/, you should use telinit to check various runlevels (which keeps your sshd connection still live). Go all out, should take at least a full hour.

Another thing I like to do is rebuild alot of my source-built software again in case anything got messed up. I upgrade perl from cpanels 5.8.8 to 5.10, which is pretty thorough, and you know, reinstall anything else I think I might need. One of the benefits of compiling your own software is all I have to do is cd to the source directory and type make -B && ( { make test || make check || make checks || make tests; } || echo ) && sudo make install and that's it. The tests/checks are optional of course.

If anyone actually ever reads this and does it, please share your advice here.. everybody knows we need it! Good Luck

HOWTO: Uninstall CPANEL over SSH originally appeared on AskApache.com

]]> http://www.askapache.com/hacking/uninstall-cpanel.html/feed 3 Htaccess Rewrites – Rewrite Tricks and Tips http://www.askapache.com/htaccess/modrewrite-tips-tricks.html http://www.askapache.com/htaccess/modrewrite-tips-tricks.html#comments Sun, 10 Apr 2011 14:05:00 +0000 AskApache http://www.askapache.com/htaccess/mod_rewrite-tips-and-tricks.html htaccess rewrite / Mod_Rewrite Tips and Tricks is as glamorous as it sounds! htaccess rewrite mod_rewrite is just possibly one of the most useful Apache modules and features. The ability to rewrite requests internally as well as externally is extremely powerful.

]]> AskApache.com

Htaccess Rewrites are enabled by using the Apache module mod_rewrite, which is one of the most powerful Apache modules and features availale. Htaccess Rewrites through mod_rewrite provide the special ability to Rewrite requests internally as well as Redirect request externally.

When the url in your browser's location bar stays the same for a request it is an internal rewrite, when the url changes an external redirection is taking place. This is one of the first, and one of the biggest mental-blocks people have when learning about mod_rewrite... But I have a secret weapon for you to use, a new discovery from years of research that makes learning mod_rewrite drastically quicker and easier. It truly does or I wouldn't be saying so in the introduction of this article.

Despite the tons of examples and docs, mod_rewrite is voodoo. Damned cool voodoo, but still voodoo.
-- Brian Moore

Note: After years of fighting to learn my way through rewriting urls with mod_rewrite, I finally had a breakthrough and found a way to outsmart the difficulty of mod_rewrite that I just couldn't seem to master. The Mod_Rewrite RewriteCond/RewriteRule Variable Value Cheatsheet is the one-of-a-kind tool that changed the game for me and made mod_rewriting no-harder than anything else.

So keep that mod_rewrite reference bookmarked and you will be able to figure out any RewriteRule or RewriteCond, an amazing feat considering it took me a LONG time to figure this stuff out on my own. But that was before the craziness, one of the most challenging and productive .htaccess experiments I've done... An experiment so ILL it's sick like a diamond disease on your wrist! $$$. That mod_rewrite experiment/tutorial was the culmination of many different advanced mod_rewrite experiments I had done in the past and included most of my very best .htaccess tricks. With the cheatsheet it's no longer Voodoo.. Its just what you do. Now lets dig in!

If you really want to take a look, check out the mod_rewrite.c and mod_rewrite.h files.

Be aware that mod_rewrite (RewriteRule, RewriteBase, and RewriteCond) code is executed for each and every HTTP request that accesses a file in or below the directory where the code resides, so it's always good to limit the code to certain circumstances if readily identifiable.

For example, to limit the next 5 RewriteRules to only be applied to .html and .php files, you can use the following code, which tests if the url does not end in .html or .php and if it doesn't, it will skip the next 5 RewriteRules.

RewriteRule !\.(html|php)$ - [S=5]
RewriteRule ^.*-(vf12|vf13|vf5|vf35|vf1|vf10|vf33|vf8).+$ - [S=1]

.htaccess rewrite examples should begin with:

Options +FollowSymLinks
 
RewriteEngine On
RewriteBase /

Require the www

Options +FollowSymLinks
RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} !^www\.askapache\.com$ [NC]
RewriteRule ^(.*)$ http://www.askapache.com/$1 [R=301,L]

Loop Stopping Code

Sometimes your rewrites cause infinite loops, stop it with one of these rewrite code snippets.

RewriteCond %{REQUEST_URI} ^/(stats/|missing\.html|failed_auth\.html|error/).* [NC]
RewriteRule .* - [L]
 
RewriteCond %{ENV:REDIRECT_STATUS} 200
RewriteRule .* - [L]

Cache-Friendly File Names

This is probably my favorite, and I use it on every site I work on. It allows me to update my javascript and css files in my visitors cache's simply by naming them differently in the html, on the server they stay the same name. This rewrites all files for /zap/j/anything-anynumber.js to /zap/j/anything.js and /zap/c/anything-anynumber.css to /zap/c/anything.css

RewriteRule ^zap/(j|c)/([a-z]+)-([0-9]+)\.(js|css)$ /zap/$1/$2.$4 [L]

SEO friendly link for non-flash browsers

When you use flash on your site and you properly supply a link to download flash that shows up for non-flash aware browsers, it is nice to use a shortcut to keep your code clean and your external links to a minimum. This code allows me to link to site.com/getflash/ for non-flash aware browsers.

RewriteRule ^getflash/?$ http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash [NC,L,R=307]

Removing the Query_String

On many sites, the page will be displayed for both page.html and page.html?anything=anything, which hurts your SEO with duplicate content. An easy way to fix this issue is to redirect external requests containing a query string to the same uri without the query_string.

RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/
RewriteCond %{QUERY_STRING} !^$
RewriteRule .* http://www.askapache.com%{REQUEST_URI}? [R=301,L]

Sending requests to a php script

This .htaccess rewrite example invisibly rewrites requests for all Adobe pdf files to be handled by /cgi-bin/pdf-script.php

RewriteRule ^(.+)\.pdf$  /cgi-bin/pdf-script.php?file=$1.pdf [L,NC,QSA]

Setting the language variable based on Client

For sites using multiviews or with multiple language capabilities, it is nice to be able to send the correct language automatically based on the clients preferred language.

RewriteCond %{HTTP:Accept-Language} ^.*(de|es|fr|it|ja|ru|en).*$ [NC]
RewriteRule ^(.*)$ - [env=prefer-language:%1]

Deny Access To Everyone Except PHP fopen

This allows access to all files by php fopen, but denies anyone else.

RewriteEngine On
RewriteBase /
RewriteCond %{THE_REQUEST} ^.+$ [NC]
RewriteRule .* - [F,L]

If you are looking for ways to block or deny specific requests/visitors, then you should definately read Blacklist with mod_rewrite. I give it a 10/10

Deny access to anything in a subfolder except php fopen

This can be very handy if you want to serve media files or special downloads but only through a php proxy script.

RewriteEngine On
RewriteBase /
RewriteCond %{THE_REQUEST} ^[A-Z]{3,9}\ /([^/]+)/.*\ HTTP [NC]
RewriteRule .* - [F,L]

Require no www

Options +FollowSymLinks
RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} !^askapache\.com$ [NC]
RewriteRule ^(.*)$ http://askapache.com/$1 [R=301,L]

Check for a key in QUERY_STRING

Uses a RewriteCond Directive to check QUERY_STRING for passkey, if it doesn't find it it redirects all requests for anything in the /logged-in/ directory to the /login.php script.

RewriteEngine On
RewriteBase /
RewriteCond %{QUERY_STRING} !passkey
RewriteRule ^/logged-in/(.*)$ /login.php [L]

Removes the QUERY_STRING from the URL

If the QUERY_STRING has any value at all besides blank than the?at the end of /login.php? tells mod_rewrite to remove the QUERY_STRING from login.php and redirect.

RewriteEngine On
RewriteBase /
RewriteCond %{QUERY_STRING} .
RewriteRule ^login.php /login.php? [L]

Fix for infinite loops

An error message related to this isRequest exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace.or you may seeRequest exceeded the limit,probable configuration error,Use 'LogLevel debug' to get a backtrace, orUse 'LimitInternalRecursion' to increase the limit if necessary

RewriteCond %{ENV:REDIRECT_STATUS} 200
RewriteRule .* - [L]

External Redirect .php files to .html files (SEO friendly)

RewriteRule ^(.*)\.php$ /$1.html [R=301,L]

Internal Redirect .php files to .html files (SEO friendly)

Redirects all files that end in .html to be served from filename.php so it looks like all your pages are .html but really they are .php

RewriteRule ^(.*)\.html$ $1.php [R=301,L]

block access to files during certain hours of the day

Options +FollowSymLinks
RewriteEngine On
RewriteBase /
# If the hour is 16 (4 PM) Then deny all access
RewriteCond %{TIME_HOUR} ^16$
RewriteRule ^.*$ - [F,L]

Rewrite underscores to hyphens for SEO URL

Converts all underscores "_" in urls to hyphens "-" for SEO benefits... See the full article for more info.

Options +FollowSymLinks
RewriteEngine On
RewriteBase /
 
RewriteRule !\.(html|php)$ - [S=4]
RewriteRule ^([^_]*)_([^_]*)_([^_]*)_([^_]*)_(.*)$ $1-$2-$3-$4-$5 [E=uscor:Yes]
RewriteRule ^([^_]*)_([^_]*)_([^_]*)_(.*)$ $1-$2-$3-$4 [E=uscor:Yes]
RewriteRule ^([^_]*)_([^_]*)_(.*)$ $1-$2-$3 [E=uscor:Yes]
RewriteRule ^([^_]*)_(.*)$ $1-$2 [E=uscor:Yes]
 
RewriteCond %{ENV:uscor} ^Yes$
RewriteRule (.*) http://d.com/$1 [R=301,L]

Require the www without hardcoding

Options +FollowSymLinks
RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} !^www\.[a-z-]+\.[a-z]{2,6} [NC]
RewriteCond %{HTTP_HOST} ([a-z-]+\.[a-z]{2,6})$     [NC]
RewriteRule ^/(.*)$ http://%1/$1 [R=301,L]

Require no subdomain

RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} \.([a-z-]+\.[a-z]{2,6})$ [NC]
RewriteRule ^/(.*)$ http://%1/$1 [R=301,L]

Require no subdomain

RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_HOST} \.([^\.]+\.[^\.0-9]+)$
RewriteRule ^(.*)$ http://%1/$1 [R=301,L]

Redirecting WordPress Feeds to Feedburner

Full article:Redirecting WordPress Feeds to Feedburner

RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_URI} ^/feed\.gif$
RewriteRule .* - [L]
 
RewriteCond %{HTTP_USER_AGENT} !^.*(FeedBurner|FeedValidator) [NC]
RewriteRule ^feed/?.*$ http://feeds.feedburner.com/apache/htaccess [L,R=302]
 
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule . /index.php [L]

Only allow GET and PUT Request Methods

Article: Request Methods

RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_METHOD} !^(GET|PUT)
RewriteRule .* - [F]

Prevent Files image/file hotlinking and bandwidth stealing

RewriteEngine On
RewriteBase /
RewriteCond %{HTTP_REFERER} !^$
RewriteCond %{HTTP_REFERER} !^http://(www\.)?askapache.com/.*$ [NC]
RewriteRule \.(gif|jpg|swf|flv|png)$ /feed/ [R=302,L]

Stop browser prefetching

RewriteEngine On
SetEnvIfNoCase X-Forwarded-For .+ proxy=yes
SetEnvIfNoCase X-moz prefetch no_access=yes
 
# block pre-fetch requests with X-moz headers
RewriteCond %{ENV:no_access} yes
RewriteRule .* - [F,L]

This module uses a rule-based rewriting engine (based on a regular-expression parser) to rewrite requested URLs on the fly. It supports an unlimited number of rules and an unlimited number of attached rule conditions for each rule, to provide a really flexible and powerful URL manipulation mechanism. The URL manipulations can depend on various tests, of server variables, environment variables, HTTP headers, or time stamps. Even external database lookups in various formats can be used to achieve highly granular URL matching.

This module operates on the full URLs (including the path-info part) both in per-server context (httpd.conf) and per-directory context (.htaccess) and can generate query-string parts on result. The rewritten result can lead to internal sub-processing, external request redirection or even to an internal proxy throughput.

Further details, discussion, and examples, are provided in the detailed mod_rewrite documentation.

Directives

If you aren't already comfortable using mod_rewrite then I recommend this excellent mod_rewrite guide by one of my favorite mod_rewrite gurus that I've met.

htaccess Guide Sections

| .htaccess Tutorial Index |

Htaccess Rewrites – Rewrite Tricks and Tips originally appeared on AskApache.com

]]> http://www.askapache.com/htaccess/modrewrite-tips-tricks.html/feed 130 HTTP Status Codes and Htaccess ErrorDocuments http://www.askapache.com/htaccess/apache-status-code-headers-errordocument.html http://www.askapache.com/htaccess/apache-status-code-headers-errordocument.html#comments Tue, 04 Jan 2011 20:56:15 +0000 AskApache http://www.askapache.com.com/htaccess/wow-i-served-a-page-for-every-single-http-status-code-and-saved-headers-and-content.html There are a total of 57 HTTP Status Codes recognized by the Apache Web Server. Wouldn't you like to see what all those headers and their output, ErrorDocuments look like?

]]> AskApache.com

I was trying to find an official, authoritative list of HTTP Status Codes but I kept finding lists that weren't authoritative or complete. So I searched and found my answer in the Apache HTTP Server source code. Once I had the exact HTTP Status Codes and resulting Error Documents sent by Apache, I researched deeper into HTTP Status Codes by reading as many related RFC's as I could find, and several other software source codes were explored. This is the most authoritative list I know of, if you can do better leave a comment and I'll update it. Another thing to keep in mind, the Status code number itself is what is used by software and hardware to make determinations, the phrase returned by the status code is for the human only and does not have any weight other than informing the user.. So "503 Service Unavailable", "503 Service Temporarily Unavailable", and "503 Get the heck outta here" are all completely valid.

Update March 9, 2009: A lot of sites on the web have updated their HTTP status code lists to include the HTTP Status codes listed on this page, including Wikipedia, IANA, W3C, and others, so rest assured this info is accurate and complete. If you'd like to see how to create custom error pages for all of these errors like mine /show-error-506 , then check out this detailed tutorial I just posted.

Contents

57 APACHE HTTP STATUS RESPONSE CODES

Once I compiled the list of Apache recognized HTTP Status Codes, I was dying to see them all in action (i.e. the corresponding ErrorDocument). At first I thought I would have to create a php or perl script emulating each of the 57 HTTP Status Codes, a tedious undertaking I wasn't about to do. Instead I "asked Apache" by searching the Apache HTTP Documentation for ambiguity sending Status Codes and/or triggering ErrorDocuments with an Apache Directive.
While reading up on mod_alias and the Redirect directive I found:

Apache Docs

Syntax: Redirect [status] URL-path URL The status argument can be used to return other HTTP status codes. Other status codes can be returned by giving the numeric status code as the value of status. If the status is between 300 and 399, the URL argument must be present, otherwise it must be omitted.

100 Continue
ErrorDocument Continue | Sample 100 Continue
This means that the server has received the request headers, and that the client should proceed to send the request body (in case of a request which needs to be sent; for example, a POST request). If the request body is large, sending it to a server when a request has already been rejected based upon inappropriate headers is inefficient. To have a server check if the request could be accepted based on the requests headers alone, a client must send Expect: 100-continue as a header in its initial request (see RFC 2616 14.20 Expect header) and check if a 100 Continue status code is received in response before continuing (or receive 417 Expectation Failed and not continue).
101 Switching Protocols
ErrorDocument Switching Protocols | Sample 101 Switching Protocols
This means the requester has asked the server to switch protocols and the server is acknowledging that it will do so.[3]
102 Processing
ErrorDocument Processing | Sample 102 Processing
(WebDAV) - (RFC 2518 )
200 OK
ErrorDocument OK | Sample 200 OK
Standard response for successful HTTP requests. The actual response will depend on the request method used. In a GET request, the response will contain an entity corresponding to the requested resource. In a POST request the response will contain an entity describing or containing the result of the action.
201 Created
ErrorDocument Created | Sample 201 Created
The request has been fulfilled and resulted in a new resource being created.
202 Accepted
ErrorDocument Accepted | Sample 202 Accepted
The request has been accepted for processing, but the processing has not been completed. The request might or might not eventually be acted upon, as it might be disallowed when processing actually takes place.
203 Non-Authoritative Information
ErrorDocument Non-Authoritative Information | Sample 203 Non-Authoritative Information
The server successfully processed the request, but is returning information that may be from another source.
204 No Content
ErrorDocument No Content | Sample 204 No Content
The server successfully processed the request, but is not returning any content.
205 Reset Content
ErrorDocument Reset Content | Sample 205 Reset Content
The server successfully processed the request, but is not returning any content. Unlike a 204 response, this response requires that the requester reset the document view.
206 Partial Content
ErrorDocument Partial Content | Sample 206 Partial Content
The server is delivering only part of the resource due to a range header sent by the client. This is used by tools like wget to enable resuming of interrupted downloads, or split a download into multiple simultaneous streams.
207 Multi-Status
ErrorDocument Multi-Status | Sample 207 Multi-Status
(WebDAV) - The message body that follows is an XML message and can contain a number of separate response codes, depending on how many sub-requests were made.
226 IM Used
ErrorDocument IM Used | Sample 226 IM Used
The server has fulfilled a GET request for the resource, and the response is a representation of the result of one or more instance-manipulations applied to the current instance. The actual current instance might not be available except by combining this response with other previous or future responses, as appropriate for the specific instance-manipulation(s).
300 Multiple Choices
ErrorDocument Multiple Choices | Sample 300 Multiple Choices
Indicates multiple options for the resource that the client may follow. It, for instance, could be used to present different format options for video, list files with different extensions, or word sense disambiguation.
301 Moved Permanently
ErrorDocument Moved Permanently | Sample 301 Moved Permanently
This and all future requests should be directed to the given URI.
302 Found
ErrorDocument Found | Sample 302 Found
This is the most popular redirect code[citation needed], but also an example of industrial practice contradicting the standard. HTTP/1.0 specification (RFC 1945 ) required the client to perform a temporary redirect (the original describing phrase was "Moved Temporarily"), but popular browsers implemented it as a 303 See Other. Therefore, HTTP/1.1 added status codes 303 and 307 to disambiguate between the two behaviours. However, the majority of Web applications and frameworks still use the 302 status code as if it were the 303.
303 See Other
ErrorDocument See Other | Sample 303 See Other
The response to the request can be found under another URI using a GET method. When received in response to a PUT, it should be assumed that the server has received the data and the redirect should be issued with a separate GET message.
304 Not Modified
ErrorDocument Not Modified | Sample 304 Not Modified
Indicates the resource has not been modified since last requested. Typically, the HTTP client provides a header like the If-Modified-Since header to provide a time against which to compare. Utilizing this saves bandwidth and reprocessing on both the server and client, as only the header data must be sent and received in comparison to the entirety of the page being re-processed by the server, then resent using more bandwidth of the server and client.
305 Use Proxy
ErrorDocument Use Proxy | Sample 305 Use Proxy
Many HTTP clients (such as Mozilla[4] and Internet Explorer) do not correctly handle responses with this status code, primarily for security reasons.
306 Switch Proxy
ErrorDocument Switch Proxy | Sample 306 Switch Proxy
No longer used.
307 Temporary Redirect
ErrorDocument Temporary Redirect | Sample 307 Temporary Redirect
In this occasion, the request should be repeated with another URI, but future requests can still use the original URI. In contrast to 303, the request method should not be changed when reissuing the original request. For instance, a POST request must be repeated using another POST request.
400 Bad Request
ErrorDocument Bad Request | Sample 400 Bad Request
The request contains bad syntax or cannot be fulfilled.
401 Unauthorized
ErrorDocument Unauthorized | Sample 401 Unauthorized
Similar to 403 Forbidden, but specifically for use when authentication is possible but has failed or not yet been provided. The response must include a WWW-Authenticate header field containing a challenge applicable to the requested resource. See Basic access authentication and Digest access authentication.
402 Payment Required
ErrorDocument Payment Required | Sample 402 Payment Required
The original intention was that this code might be used as part of some form of digital cash or micropayment scheme, but that has not happened, and this code has never been used.
403 Forbidden
ErrorDocument Forbidden | Sample 403 Forbidden
The request was a legal request, but the server is refusing to respond to it. Unlike a 401 Unauthorized response, authenticating will make no difference.
404 Not Found
ErrorDocument Not Found | Sample 404 Not Found
The requested resource could not be found but may be available again in the future. Subsequent requests by the client are permissible.
405 Method Not Allowed
ErrorDocument Method Not Allowed | Sample 405 Method Not Allowed
A request was made of a resource using a request method not supported by that resource; for example, using GET on a form which requires data to be presented via POST, or using PUT on a read-only resource.
406 Not Acceptable
ErrorDocument Not Acceptable | Sample 406 Not Acceptable
The requested resource is only capable of generating content not acceptable according to the Accept headers sent in the request.
407 Proxy Authentication Required
ErrorDocument Proxy Authentication Required | Sample 407 Proxy Authentication Required
Required
408 Request Timeout
ErrorDocument Request Timeout | Sample 408 Request Timeout
The server timed out waiting for the request.
409 Conflict
ErrorDocument Conflict | Sample 409 Conflict
Indicates that the request could not be processed because of conflict in the request, such as an edit conflict.
410 Gone
ErrorDocument Gone | Sample 410 Gone
Indicates that the resource requested is no longer available and will not be available again. This should be used when a resource has been intentionally removed; however, it is not necessary to return this code and a 404 Not Found can be issued instead. Upon receiving a 410 status code, the client should not request the resource again in the future. Clients such as search engines should remove the resource from their indexes.
411 Length Required
ErrorDocument Length Required | Sample 411 Length Required
The request did not specify the length of its content, which is required by the requested resource.
412 Precondition Failed
ErrorDocument Precondition Failed | Sample 412 Precondition Failed
The server does not meet one of the preconditions that the requester put on the request.
413 Request Entity Too Large
ErrorDocument Request Entity Too Large | Sample 413 Request Entity Too Large
The request is larger than the server is willing or able to process.
414 Request-URI Too Long
ErrorDocument Request-URI Too Long | Sample 414 Request-URI Too Long
The URI provided was too long for the server to process.
415 Unsupported Media Type
ErrorDocument Unsupported Media Type | Sample 415 Unsupported Media Type
The request did not specify any media types that the server or resource supports. For example the client specified that an image resource should be served as image/svg+xml, but the server cannot find a matching version of the image.
416 Requested Range Not Satisfiable
ErrorDocument Requested Range Not Satisfiable | Sample 416 Requested Range Not Satisfiable
The client has asked for a portion of the file, but the server cannot supply that portion (for example, if the client asked for a part of the file that lies beyond the end of the file).
417 Expectation Failed
ErrorDocument Expectation Failed | Sample 417 Expectation Failed
The server cannot meet the requirements of the Expect request-header field.
418 I'm a teapot
ErrorDocument I'm a teapot | Sample 418 I'm a teapot
The HTCPCP server is a teapot. The responding entity MAY be short and stout. Defined by the April Fools specification RFC 2324. See Hyper Text Coffee Pot Control Protocol for more information.
422 Unprocessable Entity
ErrorDocument Unprocessable Entity | Sample 422 Unprocessable Entity
(WebDAV) (RFC 4918 ) - The request was well-formed but was unable to be followed due to semantic errors.
423 Locked
ErrorDocument Locked | Sample 423 Locked
(WebDAV) (RFC 4918 ) - The resource that is being accessed is locked
424 Failed Dependency
ErrorDocument Failed Dependency | Sample 424 Failed Dependency
(WebDAV) (RFC 4918 ) - The request failed due to failure of a previous request (e.g. a PROPPATCH).
425 Unordered Collection
ErrorDocument Unordered Collection | Sample 425 Unordered Collection
Defined in drafts of WebDav Advanced Collections, but not present in "Web Distributed Authoring and Versioning (WebDAV) Ordered Collections Protocol" (RFC 3648).
426 Upgrade Required
ErrorDocument Upgrade Required | Sample 426 Upgrade Required
(RFC 2817 ) - The client should switch to TLS/1.0.
449 Retry With
ErrorDocument Retry With | Sample 449 Retry With
A Microsoft extension. The request should be retried after doing the appropriate action.
500 Internal Server Error
ErrorDocument Internal Server Error | Sample 500 Internal Server Error
A generic error message, given when no more specific message is suitable.
501 Not Implemented
ErrorDocument Not Implemented | Sample 501 Not Implemented
The server either does not recognise the request method, or it lacks the ability to fulfil the request.
502 Bad Gateway
ErrorDocument Bad Gateway | Sample 502 Bad Gateway
The server was acting as a gateway or proxy and received an invalid response from the upstream server.
503 Service Unavailable
ErrorDocument Service Unavailable | Sample 503 Service Unavailable
The server is currently unavailable (because it is overloaded or down for maintenance). Generally, this is a temporary state.
504 Gateway Timeout
ErrorDocument Gateway Timeout | Sample 504 Gateway Timeout
The server was acting as a gateway or proxy and did not receive a timely request from the upstream server.
505 HTTP Version Not Supported
ErrorDocument HTTP Version Not Supported | Sample 505 HTTP Version Not Supported
The server does not support the HTTP protocol version used in the request.
506 Variant Also Negotiates
ErrorDocument Variant Also Negotiates | Sample 506 Variant Also Negotiates
(RFC 2295 ) - Transparent content negotiation for the request, results in a circular reference.
507 Insufficient Storage
ErrorDocument Insufficient Storage | Sample 507 Insufficient Storage
(WebDAV) (RFC 4918 )
509 Bandwidth Limit Exceeded
ErrorDocument Bandwidth Limit Exceeded | Sample 509 Bandwidth Limit Exceeded
(Apache bw/limited extension) - This status code, while used by many servers, is not specified in any RFCs.
510 Not Extended
ErrorDocument Not Extended | Sample 510 Not Extended
(RFC 2774 ) - Further extensions to the request are required for the server to fulfil it.

1xx Info / Informational

HTTP_INFO - Request received, continuing process. Indicates a provisional response, consisting only of the Status-Line and optional headers, and is terminated by an empty line.

2xx Success / OK

HTTP_SUCCESS - The action was successfully received, understood, and accepted. Indicates that the client's request was successfully received, understood, and accepted.

3xx Redirect

HTTP_REDIRECT - The client must take additional action to complete the request. Indicates that further action needs to be taken by the user-agent in order to fulfill the request. The action required may be carried out by the user agent without interaction with the user if and only if the method used in the second request is GET or HEAD. A user agent should not automatically redirect a request more than 5 times, since such redirections usually indicate an infinite loop.

4xx Client Error

HTTP_CLIENT_ERROR - The request contains bad syntax or cannot be fulfilled. Indicates case where client seems to have erred. Except when responding to a HEAD request, the server should include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition.

5xx Server Error

HTTP_SERVER_ERROR - The server failed to fulfill an apparently valid request. Indicate cases in which the server is aware that it has erred or is incapable of performing the request. Except when responding to a HEAD request, the server should include an entity containing an explanation of the error situation, and whether it is a temporary or permanent condition. User agents should display any included entity to the user. These response codes are applicable to any request method.

Quick Start to triggering ErrorDocuments for each Status Code

Let start with a quick and easy example. Add the following Redirect rules to your htaccess file, then open your browser and goto each url like yoursite.com/e/400. Don't create an /e/ directory or any files.

Redirect 400 /e/400
Redirect 503 /e/503
Redirect 405 /e/405

Apache ErrorDocument Results
error 503

Automate the ErrorDocument Triggering

The htaccess Redirects

When a Status code is encountered, Apache outputs the Header and the ErrorDocument for that error code. So you can view any Header and the default ErrorDocument, by causing that numerical error code, which is caused by the Status Code.

For instance, if you request a file that doesn't exist, a 404 Not Found Header is issued and the corresponding ErrorDocument is served with the 404 Not Found Header.

Redirect 100 /e/100
Redirect 101 /e/101
Redirect 102 /e/102
Redirect 200 /e/200
Redirect 201 /e/201
Redirect 202 /e/202
Redirect 203 /e/203
Redirect 204 /e/204
Redirect 205 /e/205
Redirect 206 /e/206
Redirect 207 /e/207
Redirect 300 /e/300 http://www.askapache.com/?s=300
Redirect 301 /e/301 http://www.askapache.com/?s=301
Redirect 302 /e/302 http://www.askapache.com/?s=302
Redirect 303 /e/303 http://www.askapache.com/?s=303
Redirect 304 /e/304 http://www.askapache.com/?s=304
Redirect 305 /e/305 http://www.askapache.com/?s=305
Redirect 306 /e/306 http://www.askapache.com/?s=306
Redirect 307 /e/307 http://www.askapache.com/?s=307
Redirect 400 /e/400
Redirect 401 /e/401
Redirect 402 /e/402
Redirect 403 /e/403
Redirect 404 /e/404
Redirect 405 /e/405
Redirect 406 /e/406
Redirect 407 /e/407
Redirect 408 /e/408
Redirect 409 /e/409
Redirect 410 /e/410
Redirect 411 /e/411
Redirect 412 /e/412
Redirect 413 /e/413
Redirect 414 /e/414
Redirect 415 /e/415
Redirect 416 /e/416
Redirect 417 /e/417
Redirect 418 /e/418
Redirect 419 /e/419
Redirect 420 /e/420
Redirect 421 /e/421
Redirect 422 /e/422
Redirect 423 /e/423
Redirect 424 /e/424
Redirect 425 /e/425
Redirect 426 /e/426
Redirect 500 /e/500
Redirect 501 /e/501
Redirect 502 /e/502
Redirect 503 /e/503
Redirect 504 /e/504
Redirect 505 /e/505
Redirect 506 /e/506
Redirect 507 /e/507
Redirect 508 /e/508
Redirect 509 /e/509
Redirect 510 /e/510

PHP script that gets and outputs the Headers/Content

Now all I have to do is add 57 Redirect Directives to my htaccess, and then request each of them 1 at a time from my browser to see the result, and use a packet sniffing program like WireShark to see the Headers. Uh, scratch that, that would take way too long!

Instead I hacked up a simple php script using cURL to automate sending GET Requests to each of the 57 Redirect URL-paths. A side benefit of using the php script is that it performs all 57 Requests concurrently and saves each Requests returned headers and content to an output buffer. After all 57 have been queried, the output buffer is flushed to the browser.

<?php
$SITENAME='http://www.askapache.com';
 
$CODES = array(array('100','101','102'),
array('200','201','202','203','204','205','206','207'),
array('300','301','302','303','304','305','306','307'),
array('400','401','402','403','404','405','406','407','408','409','410','411','412','413',
'414','415','416','417','418','419','420','421','422','423','424','425','426'),
array('500','501','502','503','504','505','506','507','508','509','510'));
 
$TMPSAVETO='/tmp/'.time().'.txt';
 
# if file exists then delete it
if(is_file($TMPSAVETO))unlink($TMPSAVETO);
 
foreach($CODES as $keyd => $res)
{
foreach($res as $key)
{
$ch = curl_init("$SITENAME/e/$key");
$fp = fopen ($TMPSAVETO, "a");
curl_setopt ($ch, CURLOPT_FILE, $fp);
curl_setopt ($ch, CURLOPT_FOLLOWLOCATION ,1);
curl_setopt ($ch, CURLOPT_HEADER ,1);
curl_exec ($ch);
curl_close ($ch);
fclose ($fp);
}
}
$OUT='';
ob_start();
header ("Content-Type: text/plain;");
readfile($TMPSAVETO);
$OUT=ob_get_clean();
echo $OUT;
unlink($TMPSAVETO);
exit;
?>

Headers and Content Returned

100 Continue 

HTTP/1.1 100 Continue
<html>
<head>
<title>100 Continue</title>
</head>
<body>
<h1>Continue</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

101 Switching Protocols 

HTTP/1.1 101 Switching Protocols<html>
<head>
<title>101 Switching Protocols</title>
</head>
<body>
<h1>Switching Protocols</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

102 Processing 

HTTP/1.1 102 Processing
X-Pad: avoid browser bug<html>
<head>
<title>102 Processing</title>
</head>
<body>
<h1>Processing</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

200 OK 

HTTP/1.1 200 OK
<html>
<head>
<title>200 OK</title>
</head>
<body>
<h1>OK</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

201 Created 

HTTP/1.1 201 Created
<html>
<head>
<title>201 Created</title>
</head>
<body>
<h1>Created</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

202 Accepted 

HTTP/1.1 202 Accepted
<html>
<head>
<title>202 Accepted</title>
</head>
<body>
<h1>Accepted</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

203 Non-Authoritative Information 

HTTP/1.1 203 Non-Authoritative Information
<html>
<head>
<title>203 Non-Authoritative Information</title>
</head>
<body>
<h1>Non-Authoritative Information</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

204 No Content 

HTTP/1.1 204 No Content
Content-Type: text/plain; charset=UTF-8

205 Reset Content 

HTTP/1.1 205 Reset Content<html>
<head>
<title>205 Reset Content</title>
</head>
<body>
<h1>Reset Content</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

206 Partial Content 

HTTP/1.1 206 Partial Content<html>
<head>
<title>206 Partial Content</title>
</head>
<body>
<h1>Partial Content</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

207 Multi-Status 

HTTP/1.1 207 Multi-Status
X-Pad: avoid browser bug<html>
<head>
<title>207 Multi-Status</title>
</head>
<body>
<h1>Multi-Status</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

300 Multiple Choices 

HTTP/1.1 300 Multiple Choices
Location: http://www.askapache.com/?s=300<html>
<head>
<title>300 Multiple Choices</title>
</head>
<body>
<h1>Multiple Choices</h1>
</body>
</html>

301 Moved Permanently 

HTTP/1.1 301 Moved Permanently
Location: http://www.askapache.com/?s=301<html>
<head>
<title>301 Moved Permanently</title>
</head>
<body>
<h1>Moved Permanently</h1>
<p>The document has moved  <a href="http://www.askapache.com/?s=301">here</a> .</p>
</body>
</html>

302 Found 

HTTP/1.1 302 Found
Location: http://www.askapache.com/?s=302<html>
<head>
<title>302 Found</title>
</head>
<body>
<h1>Found</h1>
<p>The document has moved  <a href="http://www.askapache.com/?s=302">here</a> .</p>
</body>
</html>

303 See Other 

HTTP/1.1 303 See Other
Location: http://www.askapache.com/?s=303<html>
<head>
<title>303 See Other</title>
</head>
<body>
<h1>See Other</h1>
<p>The answer to your request is located  <a href="http://www.askapache.com/?s=303">here</a> .</p>
</body>
</html>

304 Not Modified 

HTTP/1.1 304 Not Modified

305 Use Proxy 

HTTP/1.1 305 Use Proxy
Location: http://www.askapache.com/?s=305<html>
<head>
<title>305 Use Proxy</title>
</head>
<body>
<h1>Use Proxy</h1>
<p>This resource is only accessible through the proxy
    http://www.askapache.com/?s=305<br />You will need to configure your client to use that proxy.</p>
</body>
</html>

306 unused 

HTTP/1.1 306 unused
Location: http://www.askapache.com/?s=306<html>
<head>
<title>306 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

307 Temporary Redirect 

HTTP/1.1 307 Temporary Redirect
Location: http://www.askapache.com/?s=307<html>
<head>
<title>307 Temporary Redirect</title>
</head>
<body>
<h1>Temporary Redirect</h1>
<p>The document has moved  <a href="http://www.askapache.com/?s=307">here</a> .</p>
</body>
</html>

400 Bad Request 

HTTP/1.1 400 Bad Request
Connection: close<html>
<head>
<title>400 Bad Request</title>
</head>
<body>
<h1>Bad Request</h1>
<p>Your browser sent a request that this server could not understand.</p>
</body>
</html>

401 Authorization Required 

HTTP/1.1 401 Authorization Required<html>
<head>
<title>401 Authorization Required</title>
</head>
<body>
<h1>Authorization Required</h1>
<p>This server could not verify that you
    are authorized to access the document
    requested.  Either you supplied the wrong
    credentials (e.g., bad password), or your
    browser doesn't understand how to supply
    the credentials required.</p>
<p>Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body>
</html>

402 Payment Required 

HTTP/1.1 402 Payment Required<html>
<head>
<title>402 Payment Required</title>
</head>
<body>
<h1>Payment Required</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

403 Forbidden 

HTTP/1.1 403 Forbidden<html>
<head>
<title>403 Forbidden</title>
</head>
<body>
<h1>Forbidden</h1>
<p>You don't have permission to access /e/403
    on this server.</p>
<p>Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body>
</html>

404 Not Found 

HTTP/1.1 404 Not Found<html>
<head>
<title>404 Not Found</title>
</head>
<body>
<h1>Not Found</h1>
<p>The requested URL /e/404 was not found on this server.</p>
</body>
</html>

NOTE:
You will most definately want to check out and use the Google 404 Error Page if you run WordPress.

405 Method Not Allowed 

HTTP/1.1 405 Method Not Allowed
Allow: TRACE
<html>
<head>
<title>405 Method Not Allowed</title>
</head>
<body>
<h1>Method Not Allowed</h1>
<p>The requested method GET is not allowed for the URL /e/405.</p>
</body>
</html>

406 Not Acceptable 

HTTP/1.1 406 Not Acceptable
<html>
<head>
<title>406 Not Acceptable</title>
</head>
<body>
<h1>Not Acceptable</h1>
<p>An appropriate representation of the requested resource /e/406 could not be found on this server.</p>
</body>
</html>

407 Proxy Authentication Required 

HTTP/1.1 407 Proxy Authentication Required<html>
<head>
<title>407 Proxy Authentication Required</title>
</head>
<body>
<h1>Proxy Authentication Required</h1>
<p>This server could not verify that you
    are authorized to access the document
    requested.  Either you supplied the wrong
    credentials (e.g., bad password), or your
    browser doesn't understand how to supply
    the credentials required.</p>
</body>
</html>

408 Request Time-out 

HTTP/1.1 408 Request Time-out
Connection: close
<html>
<head>
<title>408 Request Time-out</title>
</head>
<body>
<h1>Request Time-out</h1>
<p>Server timeout waiting for the HTTP request from the client.</p>
</body>
</html>

409 Conflict 

HTTP/1.1 409 Conflict
<html>
<head>
<title>409 Conflict</title>
</head>
<body>
<h1>Conflict</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

410 Gone 

HTTP/1.1 410 Gone
<html>
<head>
<title>410 Gone</title>
</head>
<body>
<h1>Gone</h1>
<p>The requested resource<br />/e/410<br />is no longer available on this server and there is no forwarding address.
    Please remove all references to this resource.</p>
</body>
</html>

411 Length Required 

HTTP/1.1 411 Length Required
Connection: close
<html>
<head>
<title>411 Length Required</title>
</head>
<body>
<h1>Length Required</h1>
<p>A request of the requested method GET requires a valid Content-length.</p>
</body>
</html>

412 Precondition Failed 

HTTP/1.1 412 Precondition Failed
<html>
<head>
<title>412 Precondition Failed</title>
</head>
<body>
<h1>Precondition Failed</h1>
<p>The precondition on the request for the URL /e/412 evaluated to false.</p>
</body>
</html>

413 Request Entity Too Large 

HTTP/1.1 413 Request Entity Too Large
Connection: close<html>
<head>
<title>413 Request Entity Too Large</title>
</head>
<body>
<h1>Request Entity Too Large</h1>
The requested resource<br />/e/413<br />does not allow request data with GET requests, or the amount of data provided in
the request exceeds the capacity limit.
</body>
</html>

414 Request-URI Too Large 

HTTP/1.1 414 Request-URI Too Large
Connection: close<html>
<head>
<title>414 Request-URI Too Large</title>
</head>
<body>
<h1>Request-URI Too Large</h1>
<p>The requested URL's length exceeds the capacity
    limit for this server.</p>
</body>
</html>

415 Unsupported Media Type 

HTTP/1.1 415 Unsupported Media Type<html>
<head>
<title>415 Unsupported Media Type</title>
</head>
<body>
<h1>Unsupported Media Type</h1>
<p>The supplied request data is not in a format
    acceptable for processing by this resource.</p>
</body>
</html>

416 Requested Range Not Satisfiable 

HTTP/1.1 416 Requested Range Not Satisfiable

417 Expectation Failed 

HTTP/1.1 417 Expectation Failed<html>
<head>
<title>417 Expectation Failed</title>
</head>
<body>
<h1>Expectation Failed</h1>
<p>The expectation given in the Expect request-header
    field could not be met by this server.</p>
<p>The client sent<pre>
    Expect: </p>
</body>
</html>

418 I'm a teapot 

HTTP/1.1 418 I'm a teapot<html>
<head>
<title>418 I'm a teapot</title>
</head>
<body>
<h1>I'm a teapot</h1>
<p>Unfortunately this coffee machine is out of coffee.</p>
</body>
</html>

419 unused 

HTTP/1.1 419 unused<html>
<head>
<title>419 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

420 unused 

HTTP/1.1 420 unused<html>
<head>
<title>420 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

421 unused 

HTTP/1.1 421 unused<html>
<head>
<title>421 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

422 Unprocessable Entity 

HTTP/1.1 422 Unprocessable Entity<html>
<head>
<title>422 Unprocessable Entity</title>
</head>
<body>
<h1>Unprocessable Entity</h1>
<p>The server understands the media type of the
    request entity, but was unable to process the
    contained instructions.</p>
</body>
</html>

423 Locked 

HTTP/1.1 423 Locked<html>
<head>
<title>423 Locked</title>
</head>
<body>
<h1>Locked</h1>
<p>The requested resource is currently locked.
    The lock must be released or proper identification
    given before the method can be applied.</p>
</body>
</html>

424 Failed Dependency 

HTTP/1.1 424 Failed Dependency<html>
<head>
<title>424 Failed Dependency</title>
</head>
<body>
<h1>Failed Dependency</h1>
<p>The method could not be performed on the resource
    because the requested action depended on another
    action and that other action failed.</p>
</body>
</html>

425 No code 

HTTP/1.1 425 No code<html>
<head>
<title>425 No code</title>
</head>
<body>
<h1>No code</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

426 Upgrade Required 

HTTP/1.1 426 Upgrade Required<html>
<head>
<title>426 Upgrade Required</title>
</head>
<body>
<h1>Upgrade Required</h1>
<p>The requested resource can only be retrieved
    using SSL.  The server is willing to upgrade the current
    connection to SSL, but your client doesn't support it.
    Either upgrade your client, or try requesting the page
    using https:// </p>
</body>
</html>

500 Internal Server Error 

HTTP/1.1 500 Internal Server Error
Connection: close<html>
<head>
<title>500 Internal Server Error</title>
</head>
<body>
<h1>Internal Server Error</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
<p>Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.</p>
</body>
</html>

501 Method Not Implemented 

HTTP/1.1 501 Method Not Implemented
Allow: TRACE
Connection: close<html>
<head>
<title>501 Method Not Implemented</title>
</head>
<body>
<h1>Method Not Implemented</h1>
<p>GET to /e/501 not supported.</p>
</body>
</html>

502 Bad Gateway 

HTTP/1.1 502 Bad Gateway
X-Pad: avoid browser bug<html>
<head>
<title>502 Bad Gateway</title>
</head>
<body>
<h1>Bad Gateway</h1>
<p>The proxy server received an invalid
    response from an upstream server.</p>
</body>
</html>

503 Service Temporarily Unavailable 

HTTP/1.1 503 Service Temporarily Unavailable
Connection: close<html>
<head>
<title>503 Service Temporarily Unavailable</title>
</head>
<body>
<h1>Service Temporarily Unavailable</h1>
<p>The server is temporarily unable to service your
    request due to maintenance downtime or capacity
    problems. Please try again later.</p>
</body>
</html>

504 Gateway Time-out 

HTTP/1.1 504 Gateway Time-out<html>
<head>
<title>504 Gateway Time-out</title>
</head>
<body>
<h1>Gateway Time-out</h1>
<p>The proxy server did not receive a timely response
    from the upstream server.</p>
</body>
</html>

505 HTTP Version Not Supported 

HTTP/1.1 505 HTTP Version Not Supported<html>
<head>
<title>505 HTTP Version Not Supported</title>
</head>
<body>
<h1>HTTP Version Not Supported</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

506 Variant Also Negotiates 

HTTP/1.1 506 Variant Also Negotiates<html>
<head>
<title>506 Variant Also Negotiates</title>
</head>
<body>
<h1>Variant Also Negotiates</h1>
<p>A variant for the requested resource
    <pre>
    /e/506
    </pre>
    is itself a negotiable resource. This indicates a configuration error.</p>
</body>
</html>

507 Insufficient Storage 

HTTP/1.1 507 Insufficient Storage<html>
<head>
<title>507 Insufficient Storage</title>
</head>
<body>
<h1>Insufficient Storage</h1>
<p>The method could not be performed on the resource
    because the server is unable to store the
    representation needed to successfully complete the
    request.  There is insufficient free space left in
    your storage allocation.</p>
</body>
</html>

508 unused 

HTTP/1.1 508 unused<html>
<head>
<title>508 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

509 unused 

HTTP/1.1 509 unused
<html>
<head>
<title>509 unused</title>
</head>
<body>
<h1>unused</h1>
<p>The server encountered an internal error or misconfigurationand was unable to complete your request.</p>
<p>Please contact the server administrator, a@s.com and inform them of the time the error occurred, and anything you might have done that may have caused the error.</p>
<p>More information about this error may be available in the server error log.</p>
</body>
</html>

510 Not Extended 

HTTP/1.1 510 Not Extended
X-Pad: avoid browser bug
<html>
<head>
<title>510 Not Extended</title>
</head>
<body>
<h1>Not Extended</h1>
<p>A mandatory extension policy in the request is not
    accepted by the server for this resource.</p>
</body>
</html>

Apache Source Code

httpd.h

From httpd.h 

/**
* The size of the static array in http_protocol.c for storing
* all of the potential response status-lines (a sparse table).
* A future version should dynamically generate the apr_table_t at startup.
*/
#define RESPONSE_CODES 57
#define HTTP_CONTINUE            100
#define HTTP_SWITCHING_PROTOCOLS       101
#define HTTP_PROCESSING          102
#define HTTP_OK              200
#define HTTP_CREATED             201
#define HTTP_ACCEPTED            202
#define HTTP_NON_AUTHORITATIVE       203
#define HTTP_NO_CONTENT          204
#define HTTP_RESET_CONTENT         205
#define HTTP_PARTIAL_CONTENT         206
#define HTTP_MULTI_STATUS          207
#define HTTP_MULTIPLE_CHOICES        300
#define HTTP_MOVED_PERMANENTLY       301
 
#define HTTP_MOVED_TEMPORARILY       302
#define HTTP_SEE_OTHER           303
#define HTTP_NOT_MODIFIED          304
#define HTTP_USE_PROXY           305
#define HTTP_TEMPORARY_REDIRECT      307
#define HTTP_BAD_REQUEST           400
#define HTTP_UNAUTHORIZED          401
#define HTTP_PAYMENT_REQUIRED        402
#define HTTP_FORBIDDEN           403
#define HTTP_NOT_FOUND           404
#define HTTP_METHOD_NOT_ALLOWED      405
#define HTTP_NOT_ACCEPTABLE        406
#define HTTP_PROXY_AUTHENTICATION_REQUIRED 407
#define HTTP_REQUEST_TIME_OUT        408
#define HTTP_CONFLICT            409
#define HTTP_GONE              410
#define HTTP_LENGTH_REQUIRED         411
#define HTTP_PRECONDITION_FAILED       412
#define HTTP_REQUEST_ENTITY_TOO_LARGE    413
#define HTTP_REQUEST_URI_TOO_LARGE     414
#define HTTP_UNSUPPORTED_MEDIA_TYPE    415
#define HTTP_RANGE_NOT_SATISFIABLE     416
#define HTTP_EXPECTATION_FAILED      417
#define HTTP_UNPROCESSABLE_ENTITY      422
#define HTTP_LOCKED            423
#define HTTP_FAILED_DEPENDENCY       424
#define HTTP_UPGRADE_REQUIRED        426
#define HTTP_INTERNAL_SERVER_ERROR     500
#define HTTP_NOT_IMPLEMENTED         501
#define HTTP_BAD_GATEWAY           502
#define HTTP_SERVICE_UNAVAILABLE       503
#define HTTP_GATEWAY_TIME_OUT        504
#define HTTP_VERSION_NOT_SUPPORTED     505
#define HTTP_VARIANT_ALSO_VARIES       506
#define HTTP_INSUFFICIENT_STORAGE      507
#define HTTP_NOT_EXTENDED          510
 
/** is the status code informational */
#define ap_is_HTTP_INFO(x)     (((x) >= 100)&&((x) < 200))
/** is the status code OK ?*/
#define ap_is_HTTP_SUCCESS(x)    (((x) >= 200)&&((x) < 300))
/** is the status code a redirect */
#define ap_is_HTTP_REDIRECT(x)   (((x) >= 300)&&((x) < 400))
/** is the status code a error (client or server) */
#define ap_is_HTTP_ERROR(x)    (((x) >= 400)&&((x) < 600))
/** is the status code a client error  */
#define ap_is_HTTP_CLIENT_ERROR(x) (((x) >= 400)&&((x) < 500))
/** is the status code a server error  */
#define ap_is_HTTP_SERVER_ERROR(x) (((x) >= 500)&&((x) < 600))
/** is the status code a (potentially) valid response code?  */
#define ap_is_HTTP_VALID_RESPONSE(x) (((x) >= 100)&&((x) < 600))
 
/** should the status code drop the connection */
#define ap_status_drops_connection(x) \
(((x) == HTTP_BAD_REQUEST)       || \
((x) == HTTP_REQUEST_TIME_OUT)    || \
((x) == HTTP_LENGTH_REQUIRED)     || \
((x) == HTTP_REQUEST_ENTITY_TOO_LARGE) || \
((x) == HTTP_REQUEST_URI_TOO_LARGE) || \
((x) == HTTP_INTERNAL_SERVER_ERROR) || \
((x) == HTTP_SERVICE_UNAVAILABLE) || \
((x) == HTTP_NOT_IMPLEMENTED))

HTTP_INFO

Is the status code (x) informational?

x >= 100 && x < 200

HTTP_SUCCESS

Is the status code (x) OK?

x >= 200 && x < 300

HTTP_REDIRECT

Is the status code (x) a redirect?

x >= 300 && x < 400

HTTP_ERROR

Is the status code (x) a error (client or server)?

x >= 400 && x < 600

HTTP_CLIENT_ERROR

Is the status code (x) a client error?

x >= 400 && x < 500

HTTP_SERVER_ERROR

Is the status code (x) a server error?

x >= 500 && x < 600

HTTP_VALID_RESPONSE

Is the status code (x) a (potentially) valid response code?

x >= 100 && x < 600

http_protocol.c

From http_protocol.c 

static const char * status_lines[RESPONSE_CODES] =
static const char * const status_lines[RESPONSE_CODES] =
"100 Continue",
"101 Switching Protocols",
"102 Processing",
"200 OK",
"201 Created",
"202 Accepted",
"203 Non-Authoritative Information",
"204 No Content",
"205 Reset Content",
"206 Partial Content",
"207 Multi-Status",
"300 Multiple Choices",
"301 Moved Permanently",
"302 Found",
"303 See Other",
"304 Not Modified",
"305 Use Proxy",
"306 unused",
"307 Temporary Redirect",
"400 Bad Request",
"401 Authorization Required",
"402 Payment Required",
"403 Forbidden",
"404 Not Found",
"405 Method Not Allowed",
"406 Not Acceptable",
"407 Proxy Authentication Required",
"408 Request Time-out",
"409 Conflict",
"410 Gone",
"411 Length Required",
"412 Precondition Failed",
"413 Request Entity Too Large",
"414 Request-URI Too Large",
"415 Unsupported Media Type",
"416 Requested Range Not Satisfiable",
"417 Expectation Failed",
"418 unused",
"419 unused",
"420 unused",
"421 unused",
"422 Unprocessable Entity",
"423 Locked",
"424 Failed Dependency",
"425 No code",
"426 Upgrade Required",
"500 Internal Server Error",
"501 Method Not Implemented",
"502 Bad Gateway",
"503 Service Temporarily Unavailable",
"504 Gateway Time-out",
"505 HTTP Version Not Supported",
"506 Variant Also Negotiates",
"507 Insufficient Storage",
"508 unused",
"509 unused",
"510 Not Extended"

IANA HTTP Status Code Registry

Value Description Reference
100 Continue [RFC2616] , Section 10.1.1
101 Switching Protocols [RFC2616] , Section 10.1.2
102 Processing [RFC2518] , Section 10.1
200 OK [RFC2616] , Section 10.2.1
201 Created [RFC2616] , Section 10.2.2
202 Accepted [RFC2616] , Section 10.2.3
203 Non-Authoritative Information [RFC2616] , Section 10.2.4
204 No Content [RFC2616] , Section 10.2.5
205 Reset Content [RFC2616] , Section 10.2.6
206 Partial Content [RFC2616] , Section 10.2.7
207 Multi-Status [RFC4918] , Section 11.1
226 IM Used [RFC3229] , Section 10.4.1
300 Multiple Choices [RFC2616] , Section 10.3.1
301 Moved Permanently [RFC2616] , Section 10.3.2
302 Found [RFC2616] , Section 10.3.3
303 See Other [RFC2616] , Section 10.3.4
304 Not Modified [RFC2616] , Section 10.3.5
305 Use Proxy [RFC2616] , Section 10.3.6
306 (Reserved) [RFC2616] , Section 10.3.7
307 Temporary Redirect [RFC2616] , Section 10.3.8
400 Bad Request [RFC2616] , Section 10.4.1
401 Unauthorized [RFC2616] , Section 10.4.2
402 Payment Required [RFC2616] , Section 10.4.3
403 Forbidden [RFC2616] , Section 10.4.4
404 Not Found [RFC2616] , Section 10.4.5
405 Method Not Allowed [RFC2616] , Section 10.4.6
406 Not Acceptable [RFC2616] , Section 10.4.7
407 Proxy Authentication Required [RFC2616] , Section 10.4.8
408 Request Timeout [RFC2616] , Section 10.4.9
409 Conflict [RFC2616] , Section 10.4.10
410 Gone [RFC2616] , Section 10.4.11
411 Length Required [RFC2616] , Section 10.4.12
412 Precondition Failed [RFC2616] , Section 10.4.13
413 Request Entity Too Large [RFC2616] , Section 10.4.14
414 Request-URI Too Long [RFC2616] , Section 10.4.15
415 Unsupported Media Type [RFC2616] , Section 10.4.16
416 Requested Range Not Satisfiable [RFC2616] , Section 10.4.17
417 Expectation Failed [RFC2616] , Section 10.4.18
422 Unprocessable Entity [RFC4918] , Section 11.2
423 Locked [RFC4918] , Section 11.3
424 Failed Dependency [RFC4918] , Section 11.4
426 Upgrade Required [RFC2817] , Section 6
500 Internal Server Error [RFC2616] , Section 10.5.1
501 Not Implemented [RFC2616] , Section 10.5.2
502 Bad Gateway [RFC2616] , Section 10.5.3
503 Service Unavailable [RFC2616] , Section 10.5.4
504 Gateway Timeout [RFC2616] , Section 10.5.5
505 HTTP Version Not Supported [RFC2616] , Section 10.5.6
506 Variant Also Negotiates [RFC2295] , Section 8.1
507 Insufficient Storage [RFC4918] , Section 11.5
510 Not Extended [RFC2774] , Section 7

WordPress 2.8 Changes

I just learned that my modification to the WordPress core was accepted and will be implemented for version 2.8! This may mean WordPress is the only 100% HTTP/1.1 compliant software on the net! Below is the new list (I thought someone out there could use the php array) and as you can see, unfortunately418 I'm a teapotdidn't make it ;)

$wp_header_to_desc = array(
  100 => 'Continue',
  101 => 'Switching Protocols',
  102 => 'Processing',
 
  200 => 'OK',
  201 => 'Created',
  202 => 'Accepted',
  203 => 'Non-Authoritative Information',
  204 => 'No Content',
  205 => 'Reset Content',
  206 => 'Partial Content',
  207 => 'Multi-Status',
  226 => 'IM Used',
 
  300 => 'Multiple Choices',
  301 => 'Moved Permanently',
  302 => 'Found',
  303 => 'See Other',
  304 => 'Not Modified',
  305 => 'Use Proxy',
  306 => 'Reserved',
  307 => 'Temporary Redirect',
 
  400 => 'Bad Request',
  401 => 'Unauthorized',
  402 => 'Payment Required',
  403 => 'Forbidden',
  404 => 'Not Found',
  405 => 'Method Not Allowed',
  406 => 'Not Acceptable',
  407 => 'Proxy Authentication Required',
  408 => 'Request Timeout',
  409 => 'Conflict',
  410 => 'Gone',
  411 => 'Length Required',
  412 => 'Precondition Failed',
  413 => 'Request Entity Too Large',
  414 => 'Request-URI Too Long',
  415 => 'Unsupported Media Type',
  416 => 'Requested Range Not Satisfiable',
  417 => 'Expectation Failed',
  422 => 'Unprocessable Entity',
  423 => 'Locked',
  424 => 'Failed Dependency',
  426 => 'Upgrade Required',
 
  500 => 'Internal Server Error',
  501 => 'Not Implemented',
  502 => 'Bad Gateway',
  503 => 'Service Unavailable',
  504 => 'Gateway Timeout',
  505 => 'HTTP Version Not Supported',
  506 => 'Variant Also Negotiates',
  507 => 'Insufficient Storage',
  510 => 'Not Extended'
);

RIPE WHOIS

All the status codes are standard HTTP codes ( http://www.iana.org/assignments/http-status-codes ).

Clients should avoid any form of coupling with the the text/plain error message contained in response body since it may change between different releases of the API and is only intended as a starting point for indentifying the real causes of the exception event.

The following table gives a brief description of the mapping between standard Whois V.3 responses and the related REST services status codes. Consider this table as just an example of the error mapping strategy, it may change with future releases.

System Exception Whois Error HTTP Status Code
IllegalArgumentException Bad Request (400)
IllegalStateException Internal Server Error (500)
UnsupportedOperationException Bad Request (400)
ObjectNotFoundException Not Found (404)
IllegalStateException Bad Request (400)
IOException Bad Request (400)
SystemException Internal Server Error (500)
TooManyResultsException Internal Server Error (500)
WhoisServerException No Entries Found (101) Not Found (404)
WhoisServerException Unknown Source (102) Bad Request (400)
WhoisServerException Unknown Object Type (103) Bad Request (400)
WhoisServerException Unknown Attribute in Query (104) Bad Request (400)
WhoisServerException Attribute Is Not Inverse Searchable (105) Bad Request (400)
WhoisServerException No Search Key Specified (106) Bad Request (400)
WhoisServerException Access Denied (201) Forbidden (403)
WhoisServerException Access Control Limit Reached (202) Forbidden (403)
WhoisServerException Address Passing Not Allowed (203) Bad Request (400)
WhoisServerException Maximum Referral Lines Exceeded (204) Internal Server Error (500)
WhoisServerException Connection Has Been Closed(301) Internal Server Error (500)
WhoisServerException Referral Timeout (302) Internal Server Error (500)
WhoisServerException No Referral Host (303) Internal Server Error (500)
WhoisServerException Referral Host Not Responding (304) Internal Server Error (500)

Clients will have to define error messages generic enough to represent the four main error conditions, that are Bad Request, Forbidden, Not Found and Internal Server Error.

For example a possible mapping for client side error messages may be:

HTTP Status Code Error Message
Bad Request (400) The service is unable to understand and process the query.
Forbidden (403) Query limit exceeded.
Not Found (404) No results were found for Your search "Search term"
Internal Server Error (500) The server encountered an unexpected condition which prevented it from fulfilling the request.

Helpful HTTP Links

  1. IANA registry
  2. Hyper Text Coffee Pot Control Protocol (HTCPCP/1.0)
  3. Adobe Flash status code definitions (ie 408)
  4. Microsoft Internet Information Server Status Codes and Sub-Codes
  5. httplint
  6. HTTP Headers, brief intro.
  7. Common User-Agent Issues
  8. [RFC2295] Holtman, K. and A.H. Mutz , " Transparent Content Negotiation in HTTP ", RFC 2295, March 1998.
  9. [RFC2518] Goland, Y. , Whitehead, E. , Faizi, A. , Carter, S.R. , and D. Jensen , " HTTP Extensions for Distributed Authoring -- WEBDAV ", RFC 2518, February 1999.
  10. [RFC2616] Fielding, R. , Gettys, J. , Mogul, J. , Frystyk, H. , Masinter, L. , Leach, P. , and T. Berners-Lee , " Hypertext Transfer Protocol -- HTTP/1.1 ", RFC 2616, June 1999.
  11. [RFC2774] Nielsen, H. , Leach, P. , and S. Lawrence , " An HTTP Extension Framework ", RFC 2774, February 2000.
  12. [RFC2817] Khare, R. and S. Lawrence, " Upgrading to TLS Within HTTP/1.1 ", RFC 2817, May 2000.
  13. [RFC3229] Mogul, J., Krishnamurthy, B., Douglis, F., Feldmann, A., Goland, Y., van Hoff, A., and D. Hellerstein, " Delta encoding in HTTP ", RFC 3229, January 2002.
  14. [RFC4918] Dusseault, L., Ed. , " HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV) ", RFC 4918, June 2007.

HTTP Status Codes and Htaccess ErrorDocuments originally appeared on AskApache.com

]]> http://www.askapache.com/htaccess/apache-status-code-headers-errordocument.html/feed 23 30x Faster Cache and Site Speed with TMPFS http://www.askapache.com/optimize/super-speed-secrets.html http://www.askapache.com/optimize/super-speed-secrets.html#comments Thu, 18 Mar 2010 15:43:21 +0000 AskApache http://www.askapache.com/?p=3220

NOT a typo.. 30x is measurable, well-documented, and easily tested. This is what open-source is about. I haven’t had time to post much the past year, I'm always working! So I wanted to make up for that by publishing an article on a topic that would blow your mind and be something that you could actually start using and really get some benefit out of it. This is one of those articles that the majority of web hosting companies would love to see in paperback, so they could burn it.

]]> AskApache.com

Top showing swap and memory

I haven't had time to post much the past year, so I wanted to make up for that by publishing an article on a topic that would blow your mind and be something that you could actually start using and really get some benefit out of it. This is one of those articles that the majority of web hosting companies would love to see in paperback, so they could burn it. Now ask yourself, if a webhost makes money based on how much memory, bandwidth, and data used by a customer, what would they not want their customers to do? That's right, they do not want their customers to learn how to minimize and drastically reduce these moneymakers. They get giddy when you complain about slow-site-speed, or that it takes a long time for your site to load, because they have exactly the right answer- upgrade your memory, bandwidth, and data by purchasing a more expensive plan.

WARNING!! This article has some seriously advanced stuff in it, pretty far beyond my skill level as well (getting there). I personally shutdown some of my own servers with various webhosts because of this.. Note I said personally, not intentionally. Even after spending almost a year (this has been in my drafts folder a long time) using TMPFS on as many machines as I can, I still make mistakes (gotta pay attention!) and lose a tmpfs folder.. Oh and if you go experimenting with this stuff on your web host, you will almost definately, most certainly be on the road to getting your account terminated if you are with one of the cheap hosts. They hate this stuff because it cuts right into the heart of their profit curves and can seriously disrupt a poorly configured machine. DO NOT TRY THIS!! (except and of course on your own development machines). Of course the whole point of this article is how you can take advantage of this incredible filesystem to get crazy speed improvements.. Those are the follow up articles ;)

For those of you who thought modifying your server httpd.conf and htaccess files is very dangerous, you are right. But this is not like that, this is dangerous in the sense that if you try to rush through with your super amazing "copy and paste skills" (script kids) you will easily lose entire folders. That's because TMPFS is stored in RAM/Memory, and upon reboot RAM is cleared. I personally loathe disclaimers, and if you look around you will see there aren't many even with all my sloppy poorly documented articles... So be careful if you feel up to going further.

Introducing tmpfs

If I had to explain tmpfs in one breath, I'd say that tmpfs is like a ramdisk, but different. Like a ramdisk, tmpfs can use your RAM, but it can also use your swap devices for storage. And while a traditional ramdisk is a block device and requires a mkfs command of some kind before you can actually use it, tmpfs is a filesystem, not a block device; you just mount it, and it's there. All in all, this makes tmpfs the niftiest RAM-based filesystem I've had the opportunity to meet.

Beware of WebHosts

What is a modern day web hosting company? What costs do they actually have? A webhost's only unique ability is their connection to the Internet. That is why you can see such tremendous link speed. Other than that they consist of servers that are getting smaller and cheaper for them every month. The servers they use are generally just like any computer, except much larger and built specifically for multi-tasking.

Virtualization allows you to run multiple applications and operating systems independently on a single server. Additionally, administrators can quickly move workloads from one virtual workspace to another — easily prioritizing business needs while maximizing server resources....

Virtualization removes the limitations of the traditional IT approach, enabling a single PowerEdge server to operate multiple applications simultaneously in "virtual machines"

Hosting Company Tricks

Web hosts like to vaguely describe their products as if you are buying your own powerful machine, but in reality you get placed on the same machine as hundreds or thousands of other customers, and the server basically creates an operating system for each customer using virtualization technology. Everyone on the machine literally is sharing the same RAM and resources, many times even sharing IP address's, and the virtualization software lets them limit the amount of memory / cpu / disk / and bandwidth for each of these virtual machines. That is why so often when a web host has an outage they make big public announcements and it appears that hundreds or thousands of their customers have been affected.. One of their server farm machines goes offline and it literally takes down all the customers virtualized machines with it.

Why it gets Evil

Don't get me wrong, I absolutely love this technology, both the hardware virtualization and the software side, but what I truly do not appreciate is how these companies take advantage of their customers every day and know it. Here's what they do, they make justifications about why one plan costs more than another, and these justifications are always about the same thing: CPU's, how fast the data can crunch.. RAM/Memory: How fast and how much your server can handle in terms of traffic... Disk Usage: How much storage you have... And finally bandwidth: How fast can people get data off your sites, and how many people can connect.

Now lets think for a second. The webhost has a BIG computer/server/machine that has MASSIVE amounts of RAM, DISK, PROCESSING power, and NETWORK bandwidth.. but just like anything they all have limits. So if this machine has 10GB of RAM, and the webhost offered plans that have 1GB of RAM, then on that machine they can only have 10 customers right? WRONG. If each customer pays $100/month, then of course they would love to have as many customers on that machine as possible. This builtin incentive is just the reality and isn't anyone fault.

Where it gets Evil

Here's what goes on.. all the host advertises is the 1GB of guaranteed RAM with your machine, but for even if the web server was fairly busy it would never use all of that ram because all the software is careful not to use too much, or has no need for any RAM. Runtime libraries and internal caches use ram, but it's not directly accessed by the customer, only the software. What happens is when those 10 customers aren't using 100% of their ram, which never happens, then the virtualization technology can use that RAM elsewhere. So technically you do have 1GB of RAM available, but if you aren't using it then it is essentially FREE RAM that they can sell to another customer. The only way this wouldn't work of course is if all 11 customers somehow used 100% of RAM simultaneously, at that point the 11th customer would be ramless. But that is impossible because the system is a load-balancing system that provides both an upper and a lower limit to how much RAM is allotted to each virtual machine.

It sounds unrealistic but I see server farms all the time that are stuffed full of virtual machines, like situations where there are 100 1GB customers all sharing 10GB of RAM.. no-one uses the whole 1GB allotted to them as the maximum amount they can use, and they don't know because it appears they have a lot of free RAM, but really that is virtual RAM and could be used by anyone else on the machine.

Where it gets Fun (for me)

The HTOP command in full color to manage mysqlThis is actually even worse for anyone who is using what they call "shared-hosting" which is the budget hosting that is the most common. With shared-hosting there is actually some skill involved on the hosting companies part, like real linux skills. In this setup they may or more often may not use any virtualization software. It's just a vanilla multi-user server machine where each customer gets a restricted unix account that powers their website using the same system as thousands of others on the box. This is usually dirt cheap because it costs so little to do, but alot of companies charge outrageous amounts for shared-hosting because they make it look really full-featured, which it can be, they just don't mention 1000 other people use the same machine, hard-drive, /tmp directory, network device, IP address, etc.. Alot of the times the cheaper end of the spectrum is where the most gifted system administrators are located, they are so good with linux administration that they could fit 10 customers and 100 websites on an XBOX converted to run linux, and you'd think you got a great deal until you found out! lol. Anyone alive is able to buy more hardware to expand their capacity to take on more customers, but it takes a lot of knowhow and real skill to have that many users on 1 machine. I've seen pretty extreme cases that are analogous to the XBOX example (which is possible by the way).

I personally love shared-hosting environments, because for those of us who know almost as much or more than the system administrators running the machine we are able to use a disproportionate (legally) amount of the CPU and RAM available on the system. So for example my sites would all show up fast and be able to handle more traffic than several other customers combined. Not because anything has been circumvented, but because I am able to access and utilize as much of the guaranteed 1GB of RAM that I am paying for every month, which is usually just a few bucks. The downside is that when you have corporate sites or really high-traffic sites then you are forced to move to a more powerful machine..

This leads to a familiar situation for some of you.. When your site starts becoming popular and you are getting a lot of traffic, this means that your site could be using 10x the amount of RAM and Bandwidth of any other customer in that server farm. And what that really means to the webhost is that you are costing them 10x what anyone else is.. And if they removed you, they would have the space for 10 new customers to take your place, and they would make 10x more money. DreamHost is notorious for terminating accounts because of that.. It happened to me except I was given the option to pay 5x more a month for their "upgrade" to a VPS. Giant shared-hosts advertise like crazy how they offer unlimited bandwidth, but when you start using 100x more bandwidth than anyone on your server you are costing them 100x what you are paying them, every month. That's why you will never see a webhost offering this kind of unlimited bandwidth that doesn't require you to sign a contract giving them permission to terminate your account for any reason. Seriously read the fine print at DreamHost or anywhere else, it's included because that is a core part of their business to terminate anyone using too much bandwidth since that is bandwidth they can't sell to dozens of other customers. That's why I eventually closed my account with them and moved to a legitimate company, it's a great host for spammers though.

Back in the mid-90's I was doing a lot of war-dialing with my modem and discovering all sorts of networks and machines, many of them were Unix and Solaris based public systems, and when I managed to gain access to the system and found myself staring at a unix shell I was very excited but also a total idiot. In those days of using the phone networks to research unknown systems it was very difficult for anyone to actually get the phone company to trace a call, so instead of what happens today where it is child's play to trace an IP address, back then it was a very real back-and-forth battle between the system admin and whoever was gaining access to their system. Essentially, I would gain a shell or some kind of terminal, and just go at it trying to figure out what it could do, trying all kinds of commands. Inevitably this would eventually alert even the laziest admin and they would proceed to attempt to lock me out. It was great sport and extremely addictive. When my favorite system (a massive sun machine in the basement of a big library) finally locked me out and I couldn't get back in I went to my local library and got some reading material -- one of my favorites was the red hat bible. I was able to acquire my own computer and the first thing I did was install red hat linux onto it from the discs included with the book. For the next several years I was essentially offline, all we had at home was a modem and it was becoming difficult to locate any more systems in my area code.. I was into phreaking of course as well, but I never was able to make free long-distance war-dialing a reality. So I just read the books and learned what I could. I would also goto the library when I could in order to use their machines which were connected to the internet (before aol it was much different than today's internet) and since my time was short I would download as many documents as I could so that I could read them offline. The TLDP documentation that we know today was around back then in various forms, and I read every HOWTO in the index, though not understanding half. The other big resource I found for really intense reading was the kernel documentation, which admitedly I still don't comprehend 1/4th of.. I try and peruse all the new documents when a new kernel is released, since the kernel is where all the real action is, hence the military authoritative name, and that is how I discovered one of the coolest features of Linux that I have found. TMPFS!

TMPFS kills the RAMDISK

Ok so we all know what RAM is, it's the memory cards that most people never see that is used by the computer to store and access data that all programs need. RAM is very expensive compared to most PC components, because it's what makes a computer blazing fast or slow. So real quick lets look at a few (there are not many) ways that various linux hackers use RAM in non-conventional ways in the past.

Tmpfs is a file system which keeps all files in virtual memory. Everything is temporary in the sense that no files will be created on your hard drive. If you reboot, everything in tmpfs will be lost.

In contrast to RAM disks, which get allocated a fixed amount of physical RAM, tmpfs grows and shrinks to accommodate the files it contains and is able to swap unneeded pages out to swap space.

Like a ramdisk, tmpfs can use your RAM, but it can also use your swap devices for storage. And while a traditional ramdisk is a block device and requires a mkfs command of some kind before you can actually use it, tmpfs is a filesystem, not a block device; you just mount it, and it's there. All in all, this makes tmpfs the niftiest RAM-based filesystem I've had the opportunity to meet.

If I had to explain tmpfs in one breath, I'd say that tmpfs is like a ramdisk, but different. Like a ramdisk, tmpfs can use your RAM, but it can also use your swap devices for storage. And while a traditional ramdisk is a block device and requires a mkfs command of some kind before you can actually use it, tmpfs is a filesystem, not a block device; you just mount it, and it's there. All in all, this makes tmpfs the niftiest RAM-based filesystem I've had the opportunity to meet.


What kind of filesystem is used on your server to store all your site files? EXT4, REISERFS, EXT3, NFS, etc.. are the usual filesystems, Windows users are limited to the NTFS filesystem. A filesystem is different than a device, a device is a hard-drive disk. A filesystem is how the device is formatted to allow for file and folder structures. A hard drive is slow compared to RAM, no question about that. So what if instead of your server serving files off a hard-drive it served files stored in RAM? 30x faster thats what happens!

I just figured out how to store my cached static files created by WP-Super Cache in my server's RAM, and the difference is unbelievable. My "AskApache Crazy Cache" plugin basically forces WP-Super Cache, Hyper Cache, etc.. to recreate a static cached file for every page on a blog. For the AskApache.com site this takes around 3 minutes to complete. Once I switched to using this new method of storing the files on RAM I am able to re-cache the entire site in about 15 seconds!!!!

tmpfs is a dynamically expandable/shrinkable ramdisk, and will # use almost no memory if not populated with files

Tmpfs is a file system which keeps all files in virtual memory.

Everything in tmpfs is temporary in the sense that no files will be created on your hard drive. If you unmount a tmpfs instance, everything stored therein is lost.

tmpfs puts everything into the kernel internal caches and grows and shrinks to accommodate the files it contains and is able to swap unneeded pages out to swap space. It has maximum size limits which can be adjusted on the fly via 'mount -o remount ...'

If you compare it to ramfs (which was the template to create tmpfs) you gain swapping and limit checking. Another similar thing is the RAM disk (/dev/ram*), which simulates a fixed size hard disk in physical RAM, where you have to create an ordinary filesystem on top. Ramdisks cannot swap and you do not have the possibility to resize them.

Since tmpfs lives completely in the page cache and on swap, all tmpfs pages currently in memory will show up as cached. It will not show up as shared or something like that. Further on you can check the actual RAM+swap use of a tmpfs instance with df(1) and du(1).

Both tmpfs and ramfs mount will give you the power of fast reading and writing files from and to the primary memory. When you test this on a small file, you may not see a huge difference. You’ll notice the difference only when you write large amount of data to a file with some other processing overhead such as network.

TMPFS uses RAM+SWAP

TMPFS is another filesystem with uniquely cool capabilities. It stores any files contained within it on RAM and in SWAP which means your server can access any files stored on TMPFS without even having to access the disk, which according to technical stats is around 30 times faster than accessing a file off disk.

Some other cool aspects of TMPFS are that it intelligently and automatically sizes itself to be just alittle bigger then it needs to be. So when you remove files to a folder stored on a TMPFS filesystem, the TMPFS filesystem shrinks by allocating less RAM and/or SWAP. Conversely when adding files to TMPFS it grows larger. You can set the max-size and max-number-of-files as a mount option to make sure your TMPFS never uses all of the available RAM and SWAP, which would halt your server.

Swap

Find the swap size.

# free -m -t
             total       used       free     shared    buffers     cached
Mem:           458         93        364          0          0          0
-/+ buffers/cache:         93        364
Swap:          900          0        900
Total:        1358         93       1264

Adding 3004144k swap on /dev/sdb2.  Priority:-1 extents:1 across:3004144k
Adding 2096472k swap on /dev/sda3.  Priority:-2 extents:1 across:2096472k

Using TMPFS for Cache

The method here will show how to create and use a TMPFS filesystem to hold all the static files created by WP-Super Cache. These static files are served to visitors instead of loading php for every request, so by moving those static files to TMPFS your server will be able to access and start sending your site to the browser 30x faster!

The WP-Super Cache plugin stores all the static files in the wp-content/cache folder of your WordPress installation, so to enable TMPFS we simply will create a new TMPFS filesystem and mount it to the wp-content/cache folder. That makes anything in that folder (all the static files) be part of the TMPFS filesystem.

Boosting Cache with TMPFS

There are a lot of maybe new concepts surrounding TMPFS and it may seem too complicated, but the process of actually setting up a robust tmpfs to use for wp-super-cache's cache folder is actually very simple. As long as you have shell access to your server and the permissions required (any sudo or private server should be good to go) you can set this up in a couple minutes and not really have to give it a second thought or debug anything. Here's the process I've used on several client sites.

  1. Create a TMPFS Filesystem and Mount at /wp-content/cache/
  2. Restore TMPFS Cached Files across Reboots
  3. Keep a semi-current mirror of the TMPFS files on Disk

Create TMPFS at wp-content/cache

/etc/fstab

tmpfs /home/askapache/wp-content/cache tmpfs defaults,size=2g,noexec,nosuid,uid=648,gid=648,mode=1755 0 0

Restoring TMPFS across Reboots

In /etc/rc.local

ionice -c3 -n7 nice -n 19 rsync -ahv --stats --delete /_b/tmpfs/cache/ /home/askapache/wp-content/cache/ 1>/dev/null

Mirroring TMPFS to Disk

Cronjob entry

*/5 * * * * /usr/bin/ionice -c3 -n7 /bin/nice -n 19 /usr/bin/rsync -ah --stats --delete /home/askapache/wp-content/cache/ /_b/tmpfs/cache/ 1>/dev/null

/tmp, /var/run, and /var/lock

The directories /tmp, /var/run, and /var/lock contain files that are not needed across reboots. This means they are ideal candidates for tmpfs. HEre's how to do it.

tmpfs /var/run tmpfs defaults,rw,nosuid,mode=0755 0 0
tmpfs /var/lock tmpfs defaults,rw,noexec,nosuid,nodev,mode=1777 0 0

Resize /dev/shm

You can view your current /dev/shm size with the command df -ha|grep /dev/shm then if you want to resize that use the command:

mount -t tmpfs -o remount,size-2G,rw,nosuid,nodev tmpfs /dev/shm
Secure /dev/shm:
 
Step 1: Edit your /etc/fstab:
 
nano -w /etc/fstab
 
Locate:
 
none /dev/shm tmpfs defaults,rw 0 0
 
Change it to:
 
none /dev/shm tmpfs defaults,nosuid,noexec,rw 0 0
 
Step 2: Remount /dev/shm:
 
mount -o remount /dev/shm
 
guilt makes extensive use of the '$$' shell variable for temporary
files in /tmp. This is a serious security vulnerability; on multi-user
systems it allows an attacker to clobber files with something like the
following:
 
for i in `seq 1 32768`; do
ln -sf /etc/passwd /tmp/guilt.log.$i;
done
 
(In this example, if root does e.g. 'guilt push', /etc/passwd will get
clobbered.)

Securing and Using /tmp

tmpfs mount parameters

A good way to find a good tmpfs upper-bound is to use top to monitor your system's swap usage during peak usage periods. Then, make sure that you specify a tmpfs upper-bound that's slightly less than the sum of all free swap and free RAM during these peak usage times.

mode=1777 sets sticky bit on directory. Only file owners can delete files in this directory.

The following parameters accept a suffix k, m or g for Ki, Mi, Gi (binary kilo, mega and giga) and can be changed on remount.

  • size: Override default maximum size of the filesystem. The size is given in bytes, and rounded down to entire pages. The default is half of the memory.The limit of allocated bytes for this tmpfs instance. The default is half of your physical RAM without swap. If you oversize your tmpfs instances the machine will deadlock since the OOM handler will not be able to free that memory.
  • nr_inodes: Set number of inodes.
  • nr_blocks: Set number of blocks.
  • mode: The permissions as an octal number
  • uid: The user id
  • gid: The group id
mount -t tmpfs -o size=10G,nr_inodes=10k,mode=700 tmpfs /mytmpfs

Will give you tmpfs instance on /mytmpfs which can allocate 10GB RAM/SWAP in 10240 inodes and it is only accessible by root.

Using tmpfs for /tmp storage

Many users find it very convenient to use tmpfs for /tmp and /var/tmp which does a number of positive things. Any temporary files are instead created in RAM not your hard-drive, which means that reading/writing/accessing those temporary files by various processes doesn't slow down your hard-drive read/writes/accesses for your other processes. This also has a side-effect of making your hard-drive have a longer life as it reduces activity by a huge amount.

Remember that tmpfs uses both RAM and swap, so make sure your machine has a large swapfile, like gigabytes. If your tmpfs consumes all the swap and RAM then you are screwed, so make sure that you correctly set the mount options for the tmpfs so that it doesn't do that. If your /tmp or /var/tmp gets filled with tmp files that for some reason don't get deleted except at reboot, and your machine has a very high uptime, then you will want to run some cron jobs to periodically clean the /tmp and /var/tmp directories of older files...

Here's an example scenario: let's say that we have an existing filesystem mounted at /tmp. However, we decide that we'd like to start using tmpfs for /tmp storage.

with recent 2.4 kernels, you can mount your new /tmp filesystem without getting the "device is busy" error: 

mount tmpfs /tmp -t tmpfs -o size=64m

With a single command, your new tmpfs /tmp filesystem is mounted at /tmp, on top of the already-mounted partition, which can no longer be directly accessed. However, while you can't get to the original /tmp, any processes that still have open files on this original filesystem can continue to access them. And, if you umount your tmpfs-based /tmp, your original mounted /tmp filesystem will reappear. In fact, you can mount any number of filesystems to the same mountpoint, and the mountpoint will act like a stack; unmount the current filesystem, and the last-most-recently mounted filesystem will reappear from underneath.

Bind Mounts

Using bind mounts, we can mount all, or even part of an already-mounted filesystem to another location, and have the filesystem accessible from both mountpoints at the same time!

For example, you can use bind mounts to mount your existing /tmp filesystem to /sites/askapache.com/tmp, as follows:

mount --bind /tmp /sites/askapache.com/tmp

Now, if you look inside /sites/askapache.com/tmp, you'll see your /tmp filesystem and all its files. And if you modify a file on your /tmp filesystem, you'll see the modifications in /sites/askapache.com/tmp as well. This is because they are one and the same filesystem; the kernel is simply mapping the filesystem to two different mountpoints for us.

Note that when you mount a filesystem somewhere else, any filesystems that were mounted to mountpoints inside the bind-mounted filesystem will not be moved along. In other words, if you have /tmp/cache on a separate filesystem, the bind mount we performed above will leave /sites/askapache.com/tmp/cache empty. You'll need an additional bind mount command to allow you to browse the contents of /tmp/cache at /sites/askapache.com/tmp/cache:

mount --bind /tmp/cache /sites/askapache.com/tmp/cache

Bind mounting and /dev/shm

glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for POSIX shared memory (shm_open, shm_unlink). Adding the following line to /etc/fstab should take care of this:

tmpfs  /dev/shm  tmpfs  defaults  0 0

Many systems by default have a tmpfs filesystem mounted at /dev/shm that defaults to a size of half of your physical RAM without swap. Say you decide that you'd like to start using tmpfs for /tmp, which currently lives on your root filesystem. Rather than mounting a new tmpfs filesystem to /tmp (which is possible), you may decide that you'd like the new /tmp to share the currently mounted /dev/shm filesystem. However, while you could bind mount /dev/shm to /tmp and be done with it, your /dev/shm contains some directories that you don't want to appear in /tmp. So, what do you do? How about this:

mkdir /dev/shm/tmp
chmod 1777 /dev/shm/tmp
mount --bind /dev/shm/tmp /tmp

In this example, we first create a /dev/shm/tmp directory and then give it 1777 perms, the proper permissions for /tmp. Now that our directory is ready, we can mount /dev/shm/tmp, and only /dev/shm/tmp to /tmp. So, while /tmp/foo would map to /dev/shm/tmp/foo, there's no way for you to access the /dev/shm/bar file from /tmp.


/etc/default/tmpfs WorkAround

$ cat /etc/default/tmpfs
# SHM_SIZE sets the maximum size (in bytes) that the /dev/shm tmpfs can use.
# If this is not set then the size defaults to the value of TMPFS_SIZE
# if that is set; otherwise to the kernel's default.
#
# The size will be rounded down to a multiple of the page size, 4096 bytes.
SHM_SIZE=524288000
# TMPFS_SIZE sets the max size that /dev/shm can use.  By default, the
# kernel sets this upper limit to half of available memory.
TMPFS_SIZE=524288000

RSYNC vs. CP

rsync [options]  SRC DEST
rsync -av --delete --stats /home/wincom/public_html/wp-content/cache/ /backups/tmp-mnt/cache/
-a, --archive               archive mode; same as -rlptgoD (no -H)
-r, --recursive             recurse into directories
-l, --links                 copy symlinks as symlinks
-p, --perms                 preserve permissions
-t, --times                 preserve times
-g, --group                 preserve group
-o, --owner                 preserve owner (super-user only)
-D                          same as --devices --specials
    --devices               preserve device files (super-user only)
    --specials              preserve special files
 -h, --human-readable        output numbers in a human-readable format
     --progress              show progress during transfer

Mount Options

The following options apply to any file system that is being mounted (but not every file system actually honors them)

  • async All I/O to the file system should be done asynchronously.
  • atime Update inode access time for each access. This is the default.
  • auto Can be mounted with the -a option.
  • defaults Use default options: rw, suid, dev, exec, auto, nouser, and async.
  • dev Interpret character or block special devices on the file system.
  • exec Permit execution of binaries.
  • group Allow an ordinary (i.e., non-root) user to mount the file system if one of his groups matches the group of the device. This option implies the options nosuid and nodev (unless overridden by subsequent options, as in the option line group,dev,suid).
  • mand Allow mandatory locks on this filesystem. See fcntl(2).
  • _netdev The filesystem resides on a device that requires network access (used to prevent the system from attempting to mount these filesystems until the network has been enabled on the system).
  • noatime Do not update inode access times on this file system (e.g, for faster access on the news spool to speed up news servers).
  • nodiratime Do not update directory inode access times on this filesystem.
  • noauto Can only be mounted explicitly (i.e., the -a option will not cause the file system to be mounted).
  • nodev Do not interpret character or block special devices on the file system.
  • noexec Do not allow direct execution of any binaries on the mounted file system. (Until recently it was possible to run binaries anyway using a command like /lib/ld*.so /mnt/binary. This trick fails since Linux 2.4.25 / 2.6.0.)
  • nomand Do not allow mandatory locks on this filesystem.
  • nosuid Do not allow set-user-identifier or set-group-identifier bits to take effect. (This seems safe, but is in fact rather unsafe if you have suidperl(1) installed.)
  • nouser Forbid an ordinary (i.e., non-root) user to mount the file system. This is the default.
  • owner Allow an ordinary (i.e., non-root) user to mount the file system if he is the owner of the device. This option implies the options nosuid and nodev (unless overridden by subsequent options, as in the option line owner,dev,suid).
  • remount Attempt to remount an already-mounted file system. This is commonly used to change the mount flags for a file system, especially to make a readonly file system writeable. It does not change device or mount point.
  • ro Mount the file system read-only.
  • _rnetdev Like _netdev, except "fsck -a" checks this filesystem during rc.sysinit.
  • rw Mount the file system read-write.
  • suid Allow set-user-identifier or set-group-identifier bits to take effect.
  • sync All I/O to the file system should be done synchronously. In case of media with limited number of write cycles (e.g. some flash drives) "sync" may cause life-cycle shortening.
  • dirsync All directory updates within the file system should be done synchronously. This affects the following system calls: creat, link, unlink, symlink, mkdir, rmdir, mknod and rename.
  • user Allow an ordinary user to mount the file system. The name of the mounting user is written to mtab so that he can unmount the file system again. This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line user,exec,dev,suid).
  • users Allow every user to mount and unmount the file system. This option implies the options noexec, nosuid, and nodev (unless overridden by subsequent options, as in the option line users,exec,dev,suid).

Filesystems

You can find out what is filesystems are in place by using one of the following linux commands:

cat /etc/fstab
cat /etc/mtab
cat /proc/mounts
df -a

/etc/fstab

       /etc/fstab        file system table
       /etc/mtab         table of mounted file systems
       /etc/mtab~        lock file
       /etc/mtab.tmp     temporary file
       /etc/filesystems  a list of filesystem types to try

From /etc/mtab

none /tmp tmpfs size=128m,mode=1777 0 0

From /proc/mounts

none /tmp tmpfs rw,nodev,relatime,size=131072k 0 0

/etc/fstab

It is possible that files /etc/mtab and /proc/mounts don’t match. The first file is based only on the mount command options, but the content of the second file also depends on the kernel and others settings (e.g. remote NFS server. In particular case the mount command may reports unreliable information about a NFS mount point and the /proc/mounts file usually contains more reliable information.)

This file is used in three ways:

  1. The following command (usually given in a bootscript) causes all file systems mentioned in fstab (of the proper type and/or having or not having the proper options) to be mounted as indicated, except for those whose line contains the noauto keyword. Adding the -F option will make mount fork, so that the filesystems are mounted simultaneously.
    mount -a [-t type] [-O optlist]
  2. When mounting a file system mentioned in fstab, it suffices to give only the device, or only the mount point.
  3. Normally, only the superuser can mount file systems. However, when fstab contains the user option on a line, anybody can mount the corresponding system.

The programs mount and umount maintain a list of currently mounted file systems in the file /etc/mtab.

Only the user that mounted a filesystem can unmount it again. If any user should be able to unmount, then use users instead of user in the fstab line. The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. The group option is similar, with the restriction that the user must be member of the group of the special file.

The order of records in fstab is important because fsck(8), mount(8), and umount(8) sequentially iterate through fstab doing their thing.

The first field, (fs_spec)

Describes the block special device or remote filesystem to be mounted. For ordinary mounts it will hold (a link to) a block special device node (as created by mknod(8)) for the device to be mounted, like ‘/dev/cdrom’ or ‘/dev/sdb7’. For NFS mounts one will have <host>:<dir>, e.g., ‘knuth.aeb.nl:/’. For procfs, use ‘proc’.

Instead of giving the device explicitly, one may indicate the (ext2 or xfs) filesystem that is to be mounted by its UUID or volume label (cf. e2label(8) or xfs_admin(8)), writing LABEL=

The second field, (fs_file)

Describes the mount point for the filesystem. For swap partitions, this field should be specified as ‘none’. If the name of the mount point contains spaces these can be escaped as ‘\040’.

The third field, (fs_vfstype), describes the type of the filesystem. Linux supports lots of filesystem types, such as adfs, affs, autofs, coda, coherent, cramfs, devpts, efs, ext2, ext3, hfs, hpfs, iso9660, jfs, minix, msdos, ncpfs, nfs, ntfs, proc, qnx4, reiserfs, romfs, smbfs, sysv, tmpfs, udf, ufs, umsdos, vfat, xenix, xfs, and possibly others. For more details, see mount(8). For the filesystems currently supported by the running kernel, see /proc/filesystems. An entry swap denotes a file or partition to be used for swapping, cf. swapon(8). An entry ignore causes the line to be ignored. This is useful to show disk partitions which are currently unused.

The fourth field, (fs_mntops)

Describes the mount options associated with the filesystem. It is formatted as a comma separated list of options. It contains at least the type of mount plus any additional options appropriate to the filesystem type. For documentation on the available options for non-nfs file systems, see mount(8). For documentation on all nfs-specific options have a look at nfs(5).

Common for all types of file system are the options:

  • noauto: (do not mount when "mount -a" is given, e.g., at boot time)
  • user: (allow a user to mount)
  • owner: (allow device owner to mount)
  • pamconsole: (allow a user at the console to mount)
  • comment: (e.g., for use by fstab-maintaining programs).

The fifth field, (fs_freq)

Used for these filesystems by the dump(8) command to determine which filesystems need to be dumped. If the fifth field is not present, a value of zero is returned and dump will assume that the filesystem does not need to be dumped.

The sixth field, (fs_passno)

Used by the fsck(8) program to determine the order in which filesystem checks are done at reboot time. The root filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. Filesystems within a drive will be checked sequentially, but filesystems on different drives will be checked at the same time to utilize parallelism available in the hardware. If the sixth field is not present or zero, a value of zero is returned and fsck will assume that the filesystem does not need to be checked.

More Reading

Experiment: MySQL tmpdir on tmpfs

In MySQL, the tmpdir path is mainly used for disk-based sorts (if the sort_buffer_size is not enough) and disk-based temp tables. The latter cannot always be avoided even if you made tmp_table_size and max_heap_table_size quite large, since MEMORY tables don’t support TEXT/BLOB type columns, and also since you just really don’t want to run the risk of exceeding available memory by setting these things too large.


Use tmpfs for MySQL

--tmpdir=path, -t path
The path of the directory to use for creating temporary files. It might be useful if your default /tmp directory resides on a partition that is too small to hold temporary tables. Starting from MySQL 4.1.0, this option accepts several paths that are used in round-robin fashion. Paths should be separated by colon characters (“:”) on Unix and semicolon characters (“;”) on Windows, NetWare, and OS/2. If the MySQL server is acting as a replication slave, you should not set --tmpdir to point to a directory on a memory-based file system or to a directory that is cleared when the server host restarts. For more information about the storage location of temporary files, see Section A.1.4.4, “Where MySQL Stores Temporary Files”. A replication slave needs some of its temporary files to survive a machine restart so that it can replicate temporary tables or LOAD DATA INFILE operations. If files in the temporary file directory are lost when the server restarts, replication fails.
On Unix, MySQL uses the value of the TMPDIR environment variable as the path name of the directory in which to store temporary files. If TMPDIR is not set, MySQL uses the system default, which is usually /tmp, /var/tmp, or /usr/tmp. If the file system containing your temporary file directory is too small, you can use the --tmpdir option to mysqld to specify a directory in a file system where you have enough space. Starting from MySQL 4.1, the --tmpdir option can be set to a list of several paths that are used in round-robin fashion. Paths should be separated by colon characters (“:”) on Unix and semicolon characters (“;”) on Windows, NetWare, and OS/2. Note To spread the load effectively, these paths should be located on different physical disks, not different partitions of the same disk. If the MySQL server is acting as a replication slave, you should not set --tmpdir to point to a directory on a memory-based file system or to a directory that is cleared when the server host restarts. A replication slave needs some of its temporary files to survive a machine restart so that it can replicate temporary tables or LOAD DATA INFILE operations. If files in the temporary file directory are lost when the server restarts, replication fails. MySQL creates all temporary files as hidden files. This ensures that the temporary files are removed if mysqld is terminated. The disadvantage of using hidden files is that you do not see a big temporary file that fills up the file system in which the temporary file directory is located.

Shell Script for Firefox tmpfs

#!/bin/bash
### Bind temporary directories to /dev/shm ###
# I do this instead of mounting tmpfs on the #
# directories, so less memory gets wasted.   #
##############################################
mkdir /dev/shm/{tmp,lock}
mount --bind /dev/shm/tmp /tmp
mount --bind /dev/shm/tmp /var/tmp
mount --bind /dev/shm/lock /var/lock
chmod 1777 /dev/shm/{tmp,lock}

Hey! You made it!@ at least to the bottom of the page.. I still have to finish this article, so check back in a few months.

30x Faster Cache and Site Speed with TMPFS originally appeared on AskApache.com

]]> http://www.askapache.com/optimize/super-speed-secrets.html/feed 7 PortaPutty Auto-Reconnecting SSH Tunnels on an Encrypted TrueCrypt Portable USB Key w GPG http://www.askapache.com/hacking/ssh-tunnels-truecrypt-gpg.html http://www.askapache.com/hacking/ssh-tunnels-truecrypt-gpg.html#comments Tue, 23 Feb 2010 10:11:11 +0000 AskApache http://askapache.com/?p=4001 Ok I just came back up to write the intro.. I'm trying to keep it short to avoid getting bogged down by the coolness of each step. Here is what goes on. When I logon to my XP machine at work, I bring my usb key and plug it in first. On logging a window pops up first and it's a password prompt to mount my encrypted drive leonardo. It also checks a keyfile that is located on my usb key, but all I do now is type in my password. That causes my encrypted folder to be accessible to me like a normal drive, and it autoruns a startup batch file.

The batch file causes Portable versions of Firefox (all my bookmarks, my settings) to load, and launches Portable Mozilla Thunderbird (IMAP makes this work well), which is my favorite program (great GPG features and open-source!). Also Some Adobe CS4 software is loaded from the hard drive, like DreamWeaver. In the background, a service we created executes a PortaPuttY plink command to create forwarded tunnels from various remote servers and accounts, all using key-based encryption. These tunnels are automatically reconnected if they are disconnected, meaning you can use a socks 5 if you want or even better!

Part 1 of 5

]]> AskApache.com

Ok I just came back up to write the intro.. I'm trying to keep it short to avoid getting bogged down by the coolness of each step. Here is what goes on. When I logon to my XP machine at work, I bring my usb key and plug it in first. On logging a window pops up first and it's a password prompt to mount my encrypted drive leonardo. It also checks a keyfile that is located on my usb key, but all I do now is type in my password. That causes my encrypted folder to be accessible to me like a normal drive, and it autoruns a startup batch file. The batch file causes Portable versions of Firefox (all my bookmarks, my settings) to load, and launches Portable Mozilla Thunderbird (IMAP makes this work well), which is my favorite program (great GPG features and open-source!). Also Some Adobe CS4 software is loaded from the hard drive, like DreamWeaver.

The batch file also runs PortaPuttY plink to create forwarded tunnels from various remote servers and accounts, all using key-based encryption. This includes dynamic SOCKS 4/5 tunnels, VPN tun device tunnels, and of course the basic SSH port forwarding tunnels that are so powerful. These tunnels are automatically reconnected if they are disconnected, using simple windows builtin command-line tools. And believe me it was not easy to figure out how to make this all work using plink ( essentially the same as putty minus the gui ), I literally had to use almost all of my Windows kung fu to finally end up with this.

Using MyEnTunnel

Initially I was using the MyEnTunnel program combined with a custom windows batch install script I wrote to handle the tunnels.

The tunnels are very important to making things easy while improving security. It's not easy to understand at first, but basically it means you can now connect to ANY IP address:port as if you were on that very machine connecting to localhost, like if you pinged yourself!. The result is any traffic you want is now encrypted, and you can set up your servers to only accept connections from localhost, which could save you tons of memory, bandwidth, and security attack vectors to think about. So I configure everything to use these tunnels as proxies, like Mozilla Thunderbird and Chrome, Firefox, Pidgeon, all portable versions and running from my encrypted usb drive.

This means you can walk into my house with that usb key, plug into any computer here, and surf the web/check your emails all across SSH... I know for a fact I wouldn't be able to snoop that traffic! There is a lot of exciting things going on around here, new servers and all.. Its going to take a couple more posts for me to finish this up, enjoy the article and comment.

Buy a couple USB Mini Drives

The first thing to do, is purchase a USB thumb drive.. My favorite store, TigerDirect.com, has over 104 tiny usb drives for under $24.. I've used them since the late 90's.

I bought some 4GB PNY's the size of a fingernail at a gas station and they are amazing, way faster than say a dvd drive. Just try to do some research of the differences between the 16GB vs the $4 1GB drives.. You want speed because the whole drive will be encrypted. If you can afford the super excellent and crazy fast ones, hey send me one! Buying cheap means you can buy 3 or 4 so you can always have backups. This device will make you Internationally mobile, untethered from a box, maybe getting some work done at a cafe in Florenze, or at a beach hotel in Miami. Keep dreaming, but that is more possible with a better organized system.

Backup the USB Drive

You only need to know 1 way that works, there are several. The way I do backups is to copy the entire disk image of the usb, that way I can always access it in case of usb key failure, which does happen. Free software like CloneZilla live CD with its crazy cluster computing power, or Self Image, which is free for both linux and Windows. And you could never go wrong with GHOST, one of the first to make mega bucks in the market.. it's some seriously impressive software but not open-source. Even easier for some is to just set a cron job for dd to pipe the entire drive image to a remote computer using netcat, or sshfs, or curlftpfs, or just simple ssh like below. Once setup (without stupid, bulky, dangerous software), the files on your encrypted usb don't change often, otherwise I would want to sync a backup to happen automatically every X number of logins or days (test logfile time in bash_profile?)..

SSH Back-ups To Remote Server

Files and data on your drives slow it down tremendously, meaning a web server storing backups locally is slower than one storing them externally.

Notice how much safer this command is by optimizing both the CPU and DISK I/O.. Though it's much smarter to create a new separate ssh user, one with no shell and a passwordless safer key-based encryption. Then in your /etc/security/limits.conf file or your initscript you can cause that user to have nice -19 and ionice -c2 -n7 priority set all the time automatically, since sshd, compression, and disk writing are this accounts only job. turboslow is an alias defined in a ssh_config file so you don't have to type the host, port, and settings each time.

#
# much better ways to do this on google!!!!!!!
#
ionice -c2 -n7 nice -n 19 dd if=/dev/sdb2 bs=1k conv=sync,noerror | gzip -c | ssh turboslow "dd of=sdb2.gz bs=1k"

Note that you may decide it would be better to configure the ssh connection to a less CPU intensive algorithm, perhaps even protocol 1 and DES. That's perfectly alright, but the tradeoff is that the encryption can be broken much quicker, and so you would have to implement a cron job to create new keys on both ends of the tunnel every few hours.. It's really not a big deal to setup, kind of sweet way to use key-based encryption. Also, important files ( those containing passwords, any database ) are encrypted before transport using private GPG keys, which don't need to be changed. The other thing to think about too is only letting your main PC send/write on the backup host, so the backup host is only authorized to rx and can never login back to yours.

Hey! the Internet is a dangerous place you better believe it! And it's only going to get more interesting with cloud computing's breakthrough's... More people who know they're way around... I can always use an extra server, I'd love to expand my network another node without having to pay for it (free cloud computing?), so make sure your servers are locked up strenuously. Not super perfect, just a little unique or creative in your defense to avoid any coming super-worm's that may be employing vast arsenals of the deadliest attack-engines like metasploit.. Scarry rumors.

Compression Speeds: PBZip2, Rzip, Lzop, Gzip

Probably the fastest is to use rsync over ssh, which is what I'm doing, since the algorithms used by rsync are much faster and safer. Rsync also lets you specify a compression program, so depending on your machine you will want pbzip2 (for multi processors) or rzip which are the 2 fastest I know of, though I have had some reliability issues with rzip for gigabyte transfers. Pbzip2 is amazing, blew me away the first time being 8x faster (8 CPUs) then anything. You can get it and compile a static binary for your thumb drive if want at Parallel BZIP2 (PBZIP2). Heavy code, re: this note by Jeff Gilchrist

NOTE: If you are looking for a parallel BZIP2 that works on cluster machines, you should check out MPIBZIP2 which was designed for a distributed-memory message-passing architecture. 
tar cpf "$G" --use-compress-prog=pbzip2 ./

Parallel BZIP2 (PBZIP2)

Benchmarking for Performance

Finally a couple tips, you should get an idea what the device can do, format it a few times for linux and test it on windows, and vice versa.. Some drives are too small or too old and can only support fat32 filesystems on winblows, you DO NOT want fat32 because this drive is going to be 100% encrypted and then 100% transparently decrypted as you use it, 

# note this is 512MB
dd if=/dev/sda1 of=/dev/null bs=512 count=1000000
512000000 bytes (512 MB) copied, 5.16588 s, 99.1 MB/s

Part II: Encrypted AutoRunning USB Key with TrueCrypt

Now this section anyone can do, it's so easy on Windows. What I'm going to show you how to do is get setup the right way super-fast. There are many ways to use TrueCrypt, it's one of the nicest built software programs's I've ever used... Sadly, it is not licensed open-source, and that is often a deal-breaker for security-conscious folks or anti-pirate anarchists. From the very helpful TrueCrypt web site:

Further Reading

The real fun doesn't start till all the automation starts, automating all of that from a couple batch files I wrote, one click setup. Kind of like building your own knoppix for when you have to use Windows. To begin this tutorial, setup a truecrypt traveller setup on your usb and also install the portaputty package onto the usb. You do this by creating a 3GB or whatever file on the usb and then mounting that file like you would mount an iso file. I will show the Windows Batch file I use and the tricks with Windows Volume names and how to consistently make it all work. Then we will setup MyEnTunnel with a customized batch file that forces all puttys to use portaputty (sweet hack stolen from sysinternals pagedefrag tool).Stay Tuned!

PortaPutty Auto-Reconnecting SSH Tunnels on an Encrypted TrueCrypt Portable USB Key w GPG originally appeared on AskApache.com

]]> http://www.askapache.com/hacking/ssh-tunnels-truecrypt-gpg.html/feed 8 Optimize a Website for Speed, Security, and Easy Management http://www.askapache.com/hosting/optimize-website-files-cache-security.html http://www.askapache.com/hosting/optimize-website-files-cache-security.html#comments Fri, 19 Feb 2010 01:45:26 +0000 AskApache http://www.askapache.com/?p=1380 Learn how to setup, configure, secure, optimize, and create a low-maintenance website the AskApache way. I'm piecing together all the hacks, tricks, methods, and ideas discussed throughout this blog and all across Netdom and glueing them all together to show you how to have the most optimized, crazy fastest, and best website setup I can think of.

]]> AskApache.com

optimized server setupOver the past 10 or so years I've been directly or indirectly involved in configuring/administrating/hacking thousands of websites, and I realized today that I've actually learned quite a bit about how to really make them work hard for me, instead of the other way around. It came as a mild shock to think of where I was back then vs. now because the improvements and optimizations are hundreds of smaller improvements, but taken together, the optimization hacks I've found through trial and error and much reading are as Donald would say, YOOUUGE compared to a basic website setup.

I use this awesome skeleton setup for all my high-paying clients sorry poor people! and also of course on this blog, which I use as a bleeding-edge dev server for my crazy testing. So realize that I'm already past this setup and using it to do cooler stuff. In order for you to use these more advanced ideas, you first need to get up to speed on what I'm doing so you know what I'm talking about. This article tries to help you accomplish that... remains to be seen.

An Optimized Website, The Real Deal

This first article is to give you some ideas and get you thinking and reading before the first article in this series comes out. This series details how to setup, configure, secure, optimize, and manage a website the best possible way I can come up with. It pieces together all the AskApache hacks and tricks and uses methods and ideas discussed all over this blog and all over the net and glues them all together to show you how to have the most optimized, fastest, best website setup I can think of.

Knowing the why and how behind the operation of a Web Server allows us to optimize that operation. For this example we will be creating the website www.askapache.com, which will be running WordPress and php. We will also set up static.askapache.com to serve all of our sites uploads, images, css and javascript files, flash files, etc. with advanced caching and security using Apache Server .htaccess files. So lets get started and take a look at this site structure for a moment.

/home/askapache.com
|-- /home/askapache.com/backups/
|-- /home/askapache.com/public_html/
|-- /home/askapache.com/inc/
|-- /home/askapache.com/logs/
|-- /home/askapache.com/static/
|-- /home/askapache.com/tmp/
|-- /home/askapache.com/.htpasswd-basic
`-- /home/askapache.com/.htpasswd-digest
  • /backups/ - For encrypted backups of WordPress database and site files. And any other backups.
  • /public_html/ - The document root for www.askapache.com
  • /inc/ - Folder to keep your php include files for extra security and easy management.
  • /logs/ - Save your php, apache, and other logs here or create symlinks to them.
  • /static/ - The document root for static.askapache.com
  • /tmp/ - Only need this if your host doesn't already have a /tmp folder

Strong Security, Top to Bottom

Optimize a Website for Speed, Security, and Easy ManagementSimply by implementing correct access permissions, file permissions, password protection and segmenting various folders and services we are already ahead of the game. I've always taken security extremely seriously, so you can benefit from alot of the simple solutions I'm recommending for a really locked down site.

Indeed, security is a major part of every step of this setup process, as security concerns are what drives a lot of the motivations I have for coming up with this setup in the first place. We will be doing very simple but very effective site security like the following items, which is a short list compared to everything we will be doing.

  • Fixing file permissions automatically
  • Searching for modified files on the server
  • Encrypting your backups
  • Get alerted to breakin attempts
  • Block tons of bad clients
  • Disallowing cgi scripts or any other handlers, just serve files.
  • Configuring PHP
  • Password Protection for certain areas

Ready for Warfare?

My past work for an Internet Service Provider, followed by 4 years of auditing the security of organizations external/internal networks has given me a fresh perspective on website security, and I think it allows me to see what would really be effective at preventing and killing attacks. In fact just last night I was once again doing some research into some off-the-wall security topics, and I discovered a new defense method that I will be writing about very soon. I believe that this new method, could be quickly adopted and implemented by hosting providers and software developers, which would result in us finally taking the Internet back from all those zombies and robots. This method will be discussed in great detail soon, and will be a core part of this site setups security and optimization.

Built to Bleed Speed

Optimize a Website for Speed, Security, and Easy ManagementServe's files as fast and efficiently as possible using advanced caching, HTTP Protocols, php/server configurations.

Many of the articles and research on this blog is about improving the speed and efficiency of your website. In fact that is why I am helping develop open-source software to block spammers from WordPress blogs... not because I'm bothered by the spam, but because they make the net slow! So lets look at some of the ideas we'll be implementing.

Many techniques I've been using and tweaking for several years, and recently many of them were included in the high-performance websites list. Of course we will be taking a look at this list in practical terms, meaning almost all of it, the caching, compression, etc., will be automated in keeping with our "comfort" goal, which is to say we want to make the Web Developer and Server Admin's lives as easy and comfy as possible. After all, we do the work right?

  1. Reduce HTTP requests - Reducing 304 requests with Cache-Control Headers
  2. Use a customized php.ini - Creating and using a custom PHP.ini
  3. Add an Expires header - Caching with mod_expires on Apache
  4. Gzip components
  5. Make CSS and unobtrusive Javascript as external files not inline
  6. Reduce DNS lookups - Use Static IP address, use a subdomain with static IP address for static content.
  7. Minimize Javascript - Refactor the code, compress with dojo
  8. Avoid external redirects - Use internal redirection with mod_rewrite, The correct way to redirect with 301
  9. Turn off ETags - Prevent Caching with htaccess
  10. Make AJAX cacheable and small

AskApache.com, Fastest Site Ever!

Ok it might not be the #1, but surely the top 10.. ;)

I'm very proud of the performance I am able to achieve on this site. Very proud. I started looking for ways to improve the wp-cache and wp-super-cache WordPress plugins, and came up with hacks for both of them.. but they still didn't do what I wanted so I started from scratch and wrote my own caching plugin.

With much more advanced caching options and unquestionably higher performance and lower time usage on the machine. I'm hesitant to release it to the public until I get faded on it.. I just really love it.. it has been running my site for several months now and I keep finding ways to improve it.. Stay tuned.

One feature it has is the ability to allow negotiation of a resource between apache and the client. Think almost transparent mutli-lingual blogs, mutliple formats per document (look at the rdf for this page for an example*). But that plugin is the future and this is the present.. so back to it we go.

Pamper the Webmaster with Extreme Comfort

Optimize a Website for Speed, Security, and Easy ManagementThis section alone would make this setup appealing. I have developed all types of techniques and methods to make my life as easy as possible. I could literally DIE right now and this blog would continue to run and operate for years on its own. The general philosophy that I have used to get to where I can goto the beach with my laptop and do all this crazy stuff is the idea of perfection. That may sound a little put-offish, but it basically means I will focus in on one very specific area for improvement or research and just get sick with it. Most of this blogs articles are enlightening examples of this in action. I will take a relatively unknown or unused piece of code or software and experiment with it until I feel I have it down, then I move on to the next item of never-ending research. Mostly I think this is just plain habit from when I was studying security. I'm much better at this then that :)

Apache ErrorDocuments

The 57 HTTP Status Codes and Apache ErrorDocuments article is a prime example. I was simply searching for an authoritative list of HTTP status codes, an issue not many web people find worth their time, and that search led to some of the most useful stuff I've found about the Web

This "Comfort" article will include multi-language, intelligent, and optimized error documents for handling any type of HTTP error with class and allow us to stop spammers, save bandwidth, redirect correctly, etc.. You will probably be surprised at all the uses an Apache ErrorDocument can have.. It IS one of the foundations of the HTTP-based Net after all.

Emphasis on Easy Upgrades

The whole setup is geared to make hassle-free WordPress/PHP/application upgrades possible by keeping different types of files in separate places, keeping backups, other misc tricks and since all of these files are in /home/askapache.com, your FTP connection can still access every file easily. Sometimes security and optimizing your server can lead to it being more of a pain to do updates, backups, and general maintenance. This article tries to overwhelm the balance with a trifecta of goals.

Move to a new host? Ok!

Comfort to me also means being able to pack up the whole website and database and move to another web host in under an hour. I can move the whole AskApache site to one of several other hosting providers accounts I have in about 30minutes. If this was a clients site or I was getting paid more, I'd also be focused on round-robin DNS technology, balance-load setups, and just go crazy making it fast.

Staying Online, Improving Uptime

Ever since I started sharing information and software to stop all these resource hogging zombies attacking everything I've been attacked several times. Normally I get over 10K exploit attempts or requests per day, which I pretty much block 100%. But a few times they've actually tried to DDOS me off the net in a distributed attack. I have implemented several "poor mans" techniques to put up your best effort at surviving, which I did. Basically you want to configure your server to KILL connections just as fast as possible and prevent your server resources from skyrocketing and surpassing your quotas. A skilled attacker could easily shut you down even without the use of a widespread botnet if they are clever, which could be devastating to your small blog or site if it goes down at a crucial instant.

Organization with Templates and Systems

I used to work with a guy who did alot of the coldfusion programming for us, and I used to cringe every time I was called in to upgrade a site or do a re-design. Files and folders EVERYWHERE! Literally images in every folder, multiple index.html, index1.html, index-old.html, and on and on it went.. It would take me hours just to reverse-engineer the site enough so I could modify files on it without having some unkown consequence happen.

Do You Have a Cluttered Desktop?

Everyone has this problem, what I do all the time is just grab everything on my desktop and put it in a folder named with the date. Then the process repeats itself and invariably a few months later I'm looking at a cluttered screen again.

This absolutely is the worst thing that can happen to a website, worst for security, comfort for webmaster, and speed. So this setup addresses that issue completely heads on. With all the different pages, tools, and resources available on this blog, I can almost promise you that my site has less files than yours. No small feat to be sure, but worth every second I spent researching how to do it now that its on and popping.

What's a Website really?

All hosts are different, but any host worth their salt is running some kind of BSD/Linux operating system, and that is good news because those operating systems all use very similarly excellent file/folder structures with huge organization systems. If your web hosting provider is running on a Windows based operating system or other locked/proprietary software than this article is not for you and I would recommend switching hosts to a BSD/Linux open-source operating system.

Listening for Requests with Web Hosting and DNS

First you set your website up so it can start serving.

  1. You buy your domain name, which just gives you the right to use it.
  2. You pay your webhost for an account on their machine running a Server connected to the Net via a fast connection link.
  3. You pay a DNS provider to redirect requests for your domain name to be sent to your webhosts machine running the server.

Sub-Domain for Serving Assets

This is a very cool method I've been using more and more frequently because it makes updates, upgrades, and changes so much easier to manage. And segmenting various parts of the site is smart security, and even smarter in the way of speeding up a website and keeping your servers running mean and lean.

Full Site Structure Expanded

/home/askapache.com
|-- /home/askapache.com/backups/
|-- /home/askapache.com/public_html/
|   |-- /home/askapache.com/public_html/about/
|   |-- /home/askapache.com/public_html/admin/
|   |-- /home/askapache.com/public_html/cgi-bin/
|   |-- /home/askapache.com/public_html/.htaccess
|   |-- /home/askapache.com/public_html/index.php
|   `-- /home/askapache.com/public_html/robots.txt
|-- /home/askapache.com/inc/
|   |-- /home/askapache.com/inc/config.inc.php
|   `-- /home/askapache.com/inc/settings.inc.php
|-- /home/askapache.com/logs/
|   |-- /home/askapache.com/logs/access.log
|   |-- /home/askapache.com/logs/error.log
|   |-- /home/askapache.com/logs/logins.log
|   |-- /home/askapache.com/logs/modsec_audit.log
|   |-- /home/askapache.com/logs/modsec_debug.log
|   `-- /home/askapache.com/logs/php_error.log
|-- /home/askapache.com/static/
|   |-- /home/askapache.com/static/css/
|   |-- /home/askapache.com/static/flv/
|   |-- /home/askapache.com/static/img/
|   |-- /home/askapache.com/static/js/
|   |-- /home/askapache.com/static/mp3/
|   |-- /home/askapache.com/static/pdf/
|   |-- /home/askapache.com/static/swf/
|   |-- /home/askapache.com/static/.htaccess
|   |-- /home/askapache.com/static/index.html
|   `-- /home/askapache.com/static/robots.txt
|-- /home/askapache.com/tmp/
|-- /home/askapache.com/.htpasswd-basic
`-- /home/askapache.com/.htpasswd-digest

Full Expanded Structure

/home/askapache.com
|-- /home/askapache.com/backups/
|-- /home/askapache.com/public_html/
|   |-- /home/askapache.com/public_html/about/
|   |   `-- /home/askapache.com/public_html/about/index.html
|   |-- /home/askapache.com/public_html/admin/
|   |   |-- /home/askapache.com/public_html/admin/.htaccess
|   |   `-- /home/askapache.com/public_html/admin/index.html
|   |-- /home/askapache.com/public_html/cgi-bin/
|   |   |-- /home/askapache.com/public_html/cgi-bin/bin/
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/bin/.htaccess
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/bin/php.cgi*
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/bin/php.ini
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/bin/php4.cgi*
|   |   |   `-- /home/askapache.com/public_html/cgi-bin/bin/php5.cgi*
|   |   |-- /home/askapache.com/public_html/cgi-bin/private/
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/private/.htaccess
|   |   |   |-- /home/askapache.com/public_html/cgi-bin/private/debug.php
|   |   |   `-- /home/askapache.com/public_html/cgi-bin/private/stats.php
|   |   |-- /home/askapache.com/public_html/cgi-bin/.htaccess
|   |   |-- /home/askapache.com/public_html/cgi-bin/login.php
|   |   |-- /home/askapache.com/public_html/cgi-bin/printenv.cgi*
 
|   |   `-- /home/askapache.com/public_html/cgi-bin/redir.cgi*
|   |-- /home/askapache.com/public_html/.htaccess
|   |-- /home/askapache.com/public_html/index.php
|   `-- /home/askapache.com/public_html/robots.txt
|-- /home/askapache.com/inc/
|   |-- /home/askapache.com/inc/config.php
|   `-- /home/askapache.com/inc/functions.php
|-- /home/askapache.com/logs/
|   |-- /home/askapache.com/logs/access.log
|   |-- /home/askapache.com/logs/error.log
|   |-- /home/askapache.com/logs/logins.log
|   |-- /home/askapache.com/logs/modsec_audit.log
|   |-- /home/askapache.com/logs/modsec_debug.log
|   `-- /home/askapache.com/logs/php_error.log
|-- /home/askapache.com/static/
|   |-- /home/askapache.com/static/css/
|   |   `-- /home/askapache.com/static/css/apache.css
|   |-- /home/askapache.com/static/flv/
|   |   `-- /home/askapache.com/static/flv/apache.flv
|   |-- /home/askapache.com/static/img/
|   |   |-- /home/askapache.com/static/img/apache.gif
|   |   |-- /home/askapache.com/static/img/apache.jpg
|   |   `-- /home/askapache.com/static/img/apache.png
|   |-- /home/askapache.com/static/js/
|   |   `-- /home/askapache.com/static/js/apache.js
|   |-- /home/askapache.com/static/mp3/
|   |   `-- /home/askapache.com/static/mp3/apache.mp3
|   |-- /home/askapache.com/static/pdf/
|   |   `-- /home/askapache.com/static/pdf/apache.pdf
|   |-- /home/askapache.com/static/swf/
|   |   `-- /home/askapache.com/static/swf/apache.swf
|   |-- /home/askapache.com/static/.htaccess
|   |-- /home/askapache.com/static/index.html
|   `-- /home/askapache.com/static/robots.txt
|-- /home/askapache.com/tmp/
|-- /home/askapache.com/.htpasswd-basic
`-- /home/askapache.com/.htpasswd-digest

Merchant Account Services

If you want to make it easier for your customers to shop at your site, check out merchant account services from Network Solutions. Services like these can help bring credibility and security to your online business.

Apache is Open-Source

The buzz about apache and open-source is very real, apache is becoming more of a discussed topic as people realize the power and importance of Doing it and Doing it and Doing it well. - Movable Type Apache Installs made easy, Checking out Apache Web logs, Securing WordPress with .htaccess, WordPress Permalinks and .htaccess, New search and replace module for apache!, creating an .htaccess template, .htaccess allow directive

Check back in a week for the first article, or better yet subscribe to my rss feed or use the comment form below to get notified.

Optimize a Website for Speed, Security, and Easy Management originally appeared on AskApache.com

]]> http://www.askapache.com/hosting/optimize-website-files-cache-security.html/feed 11 Vetted – Top 3 WordPress Speed Plugins http://www.askapache.com/wordpress/fastest-caching-plugins.html http://www.askapache.com/wordpress/fastest-caching-plugins.html#comments Sun, 29 Nov 2009 19:14:16 +0000 AskApache http://www.askapache.com/?p=3701 There are so many WordPress plugins out there now that I wanted to post my favorite 3 plugins for speeding up a WP-Powered blog. These are the 3 plugins that I install for pretty much all of my WP-Powered sites, which I run about 300 now. They work together to provide a very optimized blog for speed.

DB-Cache Reloaded does something entirely different, it saves the mysql queries that are made to the WP-database, as well as the mysql results to static files, and then through php serves those cached-files instead of re-querying the mysql database. Most mysql databases are stored on separate servers, and although many are on the same local network there is a limit to how many queries, and how many connections can take place.

So DB-Cache Reloaded basically makes WP-Super Cache work alot faster when generating the cache files, and DB-Cache Reloaded helps in a number of areas un-related to WP-Super Cache, like in the admin panel. And DB-Cache without WP-Super-Cache is a joke because it still uses the application-level and php for everything. Gotta use both (or just WPSC).

]]> AskApache.com

There are so many WordPress plugins out there now that I wanted to post my favorite 3 plugins for speeding up a WP-Powered blog (including one of my plugins). These are the 3 plugins that I install for pretty much all of my WP-Powered sites, which I run about 300 now. They work together to provide a very optimized blog for speed.

Top 3 WordPress Speed Plugins

  1. DB Cache Reloaded
  2. WP Super Cache
  3. AskApache Crazy Cache

WP Caching Overview

Each request to your blog has to fire up the php interpreter and query the mysql database to create the output that you see in your browser. Using a plugin like WP Super Cache simply saves the output of that request as a static HTML file and serves that to a request instead of using php and mysql every time. DB Cache Reloaded takes this a step further by optimizing the mysql queries. Finally, AskApache Crazy Cache is used to keep a cache fully primed and ready.

Why Caching?

If you have a private server, or you want to keep your MEMORY, BANDWIDTH, and CPU usage down for your server, these plugins will be dramatic. If you have a site that is updated maybe once a month and gets a very small amount of traffic, then the AskApache Crazy Cache would be redundant. That plugin is geared for the heaviest traffic sites.

Request and Response

Most HTTP communication is initiated by a user agent (browser) and consists of a request to a resource on some origin server. In the simplest case, this may be accomplished via a single connection (v) between the user agent (UA) and the origin server (O).

             request chain ------------------------>
          UA -------------------v------------------- O
             <----------------------- response chain

If a browser requests a WP-driven page, the server generates the response (the outputted html) by loading a php interpreter or module to read the WP php files and load all the settings. WP stores the settings in a mysql database and has to query the mysql database for all the data (like the content of your post that becomes html). Finally php sends the output through the server back to the browser. This is the norm for most PHP applications. Every time an interpreter is loaded additional CPU and Memory are used. And perhaps even more troublesome for shared-hosting using a virtual or network filesystem, each load causes many hard-disk accesses, additional processes, etc.

Cache PHP

By saving the php-generated output of a page to a static html file, your server can entirely skip loading a php interpreter or other process. Originally servers were needed and created to essentially open a static file on disk and send that file back to the requesting user. So servers are specialized for this as it's their core function.

WP-Super cache does this for you by saving the output into a static html file, and by instructing the server to skip loading php. It basically only uses php for creating the cached version, in the same way that you can save this webpage as an html file, WP-Super cache saves all the WP-blog permalinks to static files.

DB-Cache Reloaded does something entirely different, it saves the mysql queries that are made to the WP-database, as well as the mysql results to static files, and then through php serves those cached-files instead of re-querying the mysql database. Most mysql databases are stored on separate servers, and although many are on the same local network there is a limit to how many queries, and how many connections can take place. But mysql is maybe the fastest thing I've seen, so your bottlenecks almost never happen there (if configured correctly).

So DB-Cache Reloaded basically makes WP-Super Cache work alot faster when generating the cache files, and DB-Cache Reloaded helps in a number of areas un-related to WP-Super Cache, like in the admin panel. And DB-Cache without WP-Super-Cache is a joke because it still uses the application-level and php for everything. Gotta use both (or just WPSC).

AskApache Crazy Cache is a plugin I wrote to do one thing very well, it runs at intervals via the WP-cron and forces WP-Super-Cache to create a static cache file for all the posts, pages, etc. on your site. Without this WPSC likes to do dumb things like try to manage it's own cache with stale files and expired files, which equals a lot more php interpreters getting loaded instead of cached static files. For sites with more than a visit/page/10minutes this plugin keeps a full primed cache built by WPSC.

Compression and WP-Super Cache

Enabling compression in WP-Super Cache is almost always a great idea. I've never had a problem other than some php compat issues with not-updated php installations. This option basically lets WP-Super Cache compress the generated output of a page and save that to the static file. Normally Apache, Lighttpd, Nginx, etc. open the static file and compress it before it is sent to the browser, then the browser automatically decompresses it to view. This happens so fast because it is run by the server.

This lets WPSC instruct your server to send the compressed version to all browsers that accept compression, and send the uncompressed static file to any other browsers. So this is helpful because it eliminates your server having to do any transparent compressing, it can instead just focus on what it does best, serving static files.

PHP is an application so it requires memory, hard-drive access, and CPU time. Check out the protocol hierarchy:

       +------+ +-----+ +-----+       +-----+
       |Telnet| | FTP | |Voice|  ...  |     |  Application Level
       +------+ +-----+ +-----+       +-----+
             |   |         |             |
            +-----+     +-----+       +-----+
            | TCP |     | RTP |  ...  |     |  Host Level
            +-----+     +-----+       +-----+
               |           |             |
            +-------------------------------+
            |    Internet Protocol & ICMP   |  Gateway Level
            +-------------------------------+
                           |
              +---------------------------+
              |   Local Network Protocol  |    Network Level
              +---------------------------+

DB Cache Reloaded

DB Cache Reloaded Plugin Page - News

DB Cache ReloadedThis plugin caches every database query with given lifetime. It is much faster than other html caching plugins and uses less disk space for caching.

I think you've heard of WP-Cache or WP Super Cache, they are both top plugins for WordPress, which make your site faster and responsive. Forget about them - with DB Cache Reloaded your site will work much faster and will use less disk space for cached files. Your visitors will always get actual information in sidebars and server CPU loads will be as low as possible.

Why is DB Cache Reloaded better than WP Super Cache?

This plugin is based on a fundamentally different principle of caching queries to database instead of full pages, which optimises WordPress from the very beginning and uses less disk space for cache files because it saves only useful information. It saves information separately and also caches hidden requests to database.

WP Super Cache

WP Super Cache Plugin Page - News

WP Super CacheThis plugin generates static html files from your dynamic WordPress blog. After a html file is generated your webserver will serve that file instead of processing the comparatively heavier and more expensive WordPress PHP scripts.

The static html files will be served to the vast majority of your users, but because a user's details are displayed in the comment form after they leave a comment those requests are handled by PHP. Static files are served to:

· Users who are not logged in.
· Users who have not left a comment on your blog.
· Or users who have not viewed a password protected post.

99% of your visitors will be served static html files. Those users who don't see the static files will still benefit because they will see regular WP-Cache cached files and your server won't be as busy as before. This plugin will help your server cope with a front page appearance on digg.com or other social networking site.

Why is WP-Super-Cache better than WP-Cache?

This plugin is based on the excellent WP-Cache plugin and therefore brings all the benefits of that plugin to WordPress. On top of that it creates copies of every page that is accessed on a blog in a form that is quickly served by the web server. It's almost as quick as if the you had saved a page in your browser and uploaded it to replace your homepage.

Will the Super Cache compression slow down my server?

No, it will do the opposite in fact. Super Cache files are compressed and stored that way so the heavy compression is done only once. These files are generally much smaller and are sent to a visitor's browser much more quickly than uncompressed html. As a result, your server spends less time talking over the network which saves CPU time and bandwidth, and can also serve the next request much more quickly.

AskApache Crazy Cache

AskApache Crazy Cache Plugin Page - News

AskApache Crazy CacheThis sweet little plugin does one thing very well. It caches all the posts on your entire blog at the same time, if you are using WP-Cache, WP-Super-Cache, or Hyper-Cache.

                              +---------+ ---------\      active OPEN
                              |  CLOSED |            \    -----------
                              +---------+<---------\   \   create TCB
                                |     ^              \   \  snd SYN
                   passive OPEN |     |   CLOSE        \   \
                   ------------ |     | ----------       \   \
                    create TCB  |     | delete TCB         \   \
                                V     |                      \   \
                              +---------+            CLOSE    |    \
                              |  LISTEN |          ---------- |     |
                              +---------+          delete TCB |     |
                   rcv SYN      |     |     SEND              |     |
                  -----------   |     |    -------            |     V
 +---------+      snd SYN,ACK  /       \   snd SYN          +---------+
 |         |<-----------------           ------------------>|         |
 |   SYN   |                    rcv SYN                     |   SYN   |
 |   RCVD  |<-----------------------------------------------|   SENT  |
 |         |                    snd ACK                     |         |
 |         |------------------           -------------------|         |
 +---------+   rcv ACK of SYN  \       /  rcv SYN,ACK       +---------+
   |           --------------   |     |   -----------
   |                  x         |     |     snd ACK
   |                            V     V
   |  CLOSE                   +---------+
   | -------                  |  ESTAB  |
   | snd FIN                  +---------+
   |                   CLOSE    |     |    rcv FIN
   V                  -------   |     |    -------
 +---------+          snd FIN  /       \   snd ACK          +---------+
 |  FIN    |<-----------------           ------------------>|  CLOSE  |
 | WAIT-1  |------------------                              |   WAIT  |
 +---------+          rcv FIN  \                            +---------+
   | rcv ACK of FIN   -------   |                            CLOSE  |
   | --------------   snd ACK   |                           ------- |
   V        x                   V                           snd FIN V
 +---------+                  +---------+                   +---------+
 |FINWAIT-2|                  | CLOSING |                   | LAST-ACK|
 +---------+                  +---------+                   +---------+
   |                rcv ACK of FIN |                 rcv ACK of FIN |
   |  rcv FIN       -------------- |    Timeout=2MSL -------------- |
   |  -------              x       V    ------------        x       V
    \ snd ACK                 +---------+delete TCB         +---------+
     ------------------------>|TIME WAIT|------------------>| CLOSED  |
                              +---------+                   +---------+
 
                      TCP Connection State Diagram

Vetted – Top 3 WordPress Speed Plugins originally appeared on AskApache.com

]]> http://www.askapache.com/wordpress/fastest-caching-plugins.html/feed 15